INSTALLATION
CONTOUR OR CONTEMPORARY FACEPLATE
Faceplate Contents List: | 4) Place the 2 wire clips on the inside of the right faceplate panel as | |
1 | Faceplate (Contour or Contemporary) | shown in diagram 3. |
1 | Louver (Contour or Contemporary) |
|
4 | Screws |
|
2 | Wire Clips |
|
1 | Cable Tie |
|
|
|
|
Faceplate Installation:
1)Place the 4
Diagram 3
5) From the right side of the unit connect the red female ON/OFF valve connectors to the ON/OFF switch located on the right faceplate panel. See diagram 4.
ON/OFF Connectors
Diagram 1
2)Open the left and right side faceplate panels of the faceplate.
3)Mount the faceplate onto the unit by aligning the 4 key hole slots in the faceplate with the screws installed to the mounting brackets on the unit. Tighten screws to secure. See diagram 2.
Diagram 4
Faceplate shown on unit
without left and right side panels to show keyhole mounting.
Diagram 2
INSTALLATION
Regency® L234 Direct Vent Gas Insert | 17 |