Regency L234-LP, L234-NG installation manual Valve Replacement, DC Sparker Wires

Page 34

MAINTENANCE

VALVE REPLACEMENT

1)Open the left and right side faceplate panels.

2)Remove the bottom louver by pulling out.

3)Remove the glass door.

a)Pull off the left side spring hook that holds the door in place. While holding the hook turn it upside down and place it into the middle opening on the top side mounting bracket. Repeat for right side.

Spring Hook

MAINTENANCE

b) Swing the door out 45 degrees and lift up 7)	Disconnect the gas connection to the
and out.	valve.
8)	Disconnect the ignitor wire from the DC
	Sparker.
9)	Disconnect the valve wires from the DC
	Sparker.
	DC Sparker Wires

4)Remove the logs.

5)Remove brick panels, if installed.

6)Remove the valve shield by undoing the 2 screws.

10) Unplug the 2 connectors from the valve.

Top Mounting Bracket	Valve Shield

34	Regency® L234 Direct Vent Gas Insert

Image 34

Contents L234 Gas Insert Regency GAS Fireplace Insert Table of Contents Safety Label Requirements MA Code CO DetectorUnit & Faceplate Dimensions Installation Materials Required Installation ChecklistMinimum Fireplace Opening Minimum Clearances to Combustible Mantel Combustibles Installation with 3 & 3 Liners VentingVent Restrictor Position Converting from 3 & 3 Venting to 3Flue Liner GAS Connection Installation GAS Insert Aeration SystemGAS Pipe Pressure Testing SIT Valve DescriptionBurner Removed Conversion KIT #536-969 from NG to LPTop Mounting Bracket Spring HookRemove burner oriﬁce with a 1/2 wrench Optional Brick Panel Installation Faceplate Contents List Contour or Contemporary FaceplateDC Sparker Remote Receiver BracketCompleted Faceplate Installation Attach Top Backing Plate to Faceplate Optional Backing PlateAttach Faceplate & Top Backing Plate to Unit Attach Left & Right Corner Backing Plate Attach Left & Right Backing Plate to FaceplateOptional Hearth Trim Customize Hearth TrimLOG SET Installation 711 713 7152-716 712 714Notch TabRight side of Burner Completed Log Set Installation Wiring Diagrams Optional Wall Thermostat Optional Remote ControlFinal Check Operating Instructions Lighting ProcedureShutdown Procedure First FireCopy of Lighting Instruction Plate FAN OperationMaintenance FAN Replacement Connector Clips Valve Replacement DC Sparker WiresValve Removed Parts List Main AssemblyFaceplate Assembly Backing Plate & Hearth Trim Assembly Warranty ConditionsInstaller Please complete the following information

L234-NG, L234-LP specifications

The Regency L234-LP and L234-NG are elegant and efficient gas fireplaces that exemplify modern design and advanced technology. These models are ideal for homeowners looking to enhance their living spaces with warmth and aesthetics. With a variety of features, the Regency L234 fireplace series stands out in both functionality and style.

One of the key characteristics of the L234 series is its choice between liquid propane (LP) and natural gas (NG) configurations, providing flexibility for various installation needs. This adaptability allows homeowners to select the fuel type that best suits their preferences and available resources.

In terms of design, the L234 fireplaces feature a contemporary clean face style, which emphasizes the stunning flames while minimizing distractions. The large viewing area is framed by a sleek, minimalist design that fits effortlessly into modern interiors. With customizable options, including different decorative media such as glass and stones, consumers can personalize the appearance of their fireplace to match their home decor.

Efficiency is another hallmark of the Regency L234 series. With its high-efficiency rating, this fireplace not only produces warmth but does so while minimizing fuel consumption. The incorporation of advanced technology such as a direct vent system allows for safe and efficient combustion, drawing in outdoor air for combustion and venting exhaust gases outside. This feature enhances the overall efficiency of the unit, ensuring the living space remains warm and comfortable.

The L234 also comes equipped with a user-friendly remote control, simplifying the operation and allowing users to adjust flame height and heat output from a distance. This remote capability enhances convenience and allows for immediate adjustments based on comfort levels.

Safety features are paramount in the design of the Regency L234 fireplaces. The units are equipped with automatic shut-off systems and advanced safety screens to prevent accidents, providing peace of mind to homeowners.

Overall, the Regency L234-LP and L234-NG gas fireplaces are exemplary choices for those seeking a blend of modern design, efficiency, and safety. With their customizable features and advanced technologies, they provide not only heating solutions but also a stylish focal point for any room. As homeowners seek eco-friendly alternatives that do not compromise on style, the Regency L234 series stands out as a top contender in the market.