Regency L234-LP, L234-NG installation manual Copy of Lighting Instruction Plate, FAN Operation

OPERATING INSTRUCTIONS

COPY OF LIGHTING INSTRUCTION PLATE	AUTOMATIC
	CONVECTION
	FAN OPERATION
	The fan operates automatically. Turn the knob
	on the left side of the faceplate to adjust to the
	desired speed. The fan will turn on as the insert
	comes up to operating temperature. After the
	unit has been turned off and the unit has been
	cooled to below useful heat output range, the
	fan will shut off automatically.
	NORMAL OPERATING
	SOUNDS OF
	GAS APPLIANCES
OPERATION	It is possible that you will hear some sounds
	from your gas appliance.This is perfectly normal
	due to the fact that there are various gauges
	and types of steel used within your appliance.
	Listed below are some examples.All are normal
	operatingsoundsandshouldnotbeconsidered
	as defects in your appliance.
	Blower:
	FPI gas appliances use high tech blowers to
	push heated air farther into the room. It is not
	unusual for the fan to make a "whirring" sound
	when ON. This sound will increase or decrease
	in volume depending on the speed setting of
	your fan speed control.
	Burner Tray:
OFF	The burner tray is positioned directly under the
	burner tube(s) and logs and is made of a different
Gas Inlet	gauge material from the rest of the fi rebox and
	body.Therefore, the varying thicknesses of steel
	will expand and contract at slightly different
	rates which can cause "ticking" and "cracking"
	sounds. You should also be aware that as there
	are temperature changes within the unit. These
	sounds will likely re-occur. Again, this is normal
	for steel fi reboxes.
	Blower Thermodisc:
	When thermally activated switch turns ON, it
	will create a small "clicking" sound. This is the
	contact switch closing.
	Pilot Flame:
	While the pilot fl ame is on it will make a slight
	"whisper" sound.
Gas Inlet	Gas Control Valve:
	As the gas control valve turns ON and OFF, a
	dull clicking sound may be heard. This is normal
	operation of a gas regulator or valve.
	Unit Body and Firebox:
	Different types and thicknesses of steel will
	expand and contract at different rates resulting in
	some "cracking" and "ticking" sounds which will
	be heard throughout the cycling process.
30	Regency® L234 Direct Vent Gas Insert