Regency G36D-NG NATURAL GAS Rigid Pipe Venting Systems, Alternate, Horizontal, Caps

Page 13

INSTALLATION

RIGID PIPE VENTING SYSTEMS

Horizontal or Vertical Terminations

The minimum components required for a basic horizontal termination are:

1Horizontal Termination Cap

190o Elbow

1Rigid Pipe Adaptor

1Wall Thimble

1Length of pipe to suit wall thickness (see chart)

Wall thickness is measured from the back standoffs to the inside mounting surface of termination cap. For siding other than vinyl furring strips may be used, instead of the vinyl siding standoff, to create a level surface to mount the vent terminal. The Terminal must not be recessed into siding. Measure the wall thickness including furring strips.

If a Vinyl Siding Standoff is required (it must be used with vinyl siding), measure to outside surface of wall without siding and add 2 inches.

Flat Wall Installation

Wall Thickness

 

Vent Length

(inches)

 

Required (inches)

 

 

 

 

 

 

4"

-

5-1/2"

 

6"

 

7" - 8-1/2"

 

9"

 

 

 

 

 

 

 

10"

-

11-1/2"

 

12"

 

 

 

 

 

 

9"

-

14-1/2"

 

11" - 14-5/8" Adj. Pipe

 

 

 

 

 

 

15"

-

23-1/2"

 

17" - 24" Adj.

 

 

 

 

 

 

 

 

 

Pipe

 

 

 

 

Corner Installation

 

Wall Thickness

 

Vent Length

(inches)

 

 

Required (inches)

3-1/4"

-

6-3/4"

 

11" - 14-5/8" Adj. Pipe

 

 

 

7-3/4" - 16-1/4"

 

17" - 24" Adj. Pipe

 

 

 

 

 

 

7-1/4"

-

8-3/4"

 

6" + 12"

 

 

 

 

 

9" + 9"

 

4-1/4"

-

5-3/4"

 

6" + 9"

 

 

 

 

 

 

 

Vertical

Terminal

Storm Collar (Part # 953)

Flashing

943 or 943S

Ceiling Firestop

(Part # 963)

Pipe Length

Vinyl Siding

Standoff (Optional)

(Part #950)

Horizontal

Termination Cap (Part# 946-523/P)

Wall Thimble (Part # 942)

Adj.Pipe Length

11" - 14-5/8"

90o Elbow

Alternate

Horizontal

Termination

Caps

24" Pipe

Length

Rigid Pipe Adaptor

(Part# 510-994)

WARNING:

Do not combine venting components from different venting systems.

However use of the the AstroCapTM and FPI Riser is acceptable with all systems.

This product has been evaluated by Intertek for using a Dura-Vent Flue Adaptor in conjunction with Selkirk Direct-Temp and Ameri Vent Direct venting systems. Use of these systems with the Direct Vent GS starting collar is deemed accept- able and does not affect the Intertek WHI listing of components.

When using piping other than Simpson Dura-Vent, 3 screws must be used to secure rigid pipe to adaptor.

The FPI AstroCapTM and FPI Riser Vent terminal is certifi ed for installations using FPI venting systems as well as Simpson Dura-Vent®, Direct Vent GS, American Metal Products, Ameri Vent Direct vent and Selkirk Direct-Temp. FPITM, and FPI AstroCapTM are the proprietary trademarks of FPI Fireplace Products International Ltd. Dura-Vent® and Direct Vent GS are registered and/or proprietary trademarks of Simpson Dura-Vent Co. Inc.

UltraGlow G36D Zero Clearance Direct Vent Gas Fireplace

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents From a neighbours phone. Follow Do not touch any electrical switchCall the fire department Unless a certified kit is usedTo the New Owner Information for MOBILE/MANUFACTURED Homes After First SaleTable of Contents Copy of Safety Decal for G36D-NG Safety LabelGeneral Safety Information InstallationInstallation Checklist Save These InstructionsManufactured Mobile Home Additional Requirements Locating Your GAS StoveThis includes Mantel LEG Clearances ClearancesFraming Finishing Combustible Mantels Top Standoff Assembly Unit Assembly Prior to InstallationVenting Introduction Top Facing Support Side Nailing StripsAir supply outlet VentVenting Description Simpson Dura-Vent Selkirk Rigid Pipe Venting Components ListDirect VentGS R Direct-Temp TM Alternate Rigid Pipe Venting SystemsHorizontal CapsUltraglow Direct Vent System Flex Rigid Pipe Venting Arrangements Horizontal TerminationsInstallation Ridid Pipe Venting Arrangements Vertical Terminations Installation Required Parts Vertical Termination With CO-LINEAR Flex SystemInstallation Snorkel Terminations Horizontal InstallationsContinue to assemble pipe lengths Vertical TerminationOffset Chart Installation ProceduresFor UltraGlow Direct Vent System Flex GAS Line Installation Pilot AdjustmentGAS Pipe Pressure Testing High ElevationBurner Orifi ce 02-75 02-55 02-52 02-50 02-53 02-51 02-54 LOG SET Installation02-54 02-51 02-55 Flush Louvers Standard Flush DoorOptional Flush Trim Wall Switch Remote ControlThermostat Wire Table Wall ThermostatDo not cut the ground terminal off under any circumstances Wiring DiagramTo Remove the Fan Installing the Optional FANOperating Instructions Normal Operating Sounds of GAS Appliances Maintenance InstructionsCopy of the Lighting Plate Instructions Maintenance Removing Valve Installing ValveG36D Main Assembly Parts ListG36D Burner Assembly & LOG SET G36D Flush Front Assembly Conditions WarrantyExclusions Register your UltraGlow online at

G36D-NG NATURAL GAS, G36D-LP PROPANE specifications

The Regency G36D-LP Propane and G36D-NG Natural Gas fireplaces are exemplary models designed to enhance both aesthetic appeal and functional warmth in any home. These innovative units are perfect for individuals looking to add a touch of elegance while enjoying the convenience of modern fireplace technology.

One of the primary features of the G36D series is its impressive heating capability, which can produce up to 34,000 BTUs, making it effective for warming large living spaces. This efficiency is complemented by their design, which allows for rapid heat distribution, ensuring that the warmth is felt throughout the room.

Both models are available in propane and natural gas options, providing flexibility based on user preference or availability. The G36D-LP utilizes propane, making it ideal for homes without a natural gas line, while the G36D-NG is suitable for those connected to a natural gas supply. This adaptability allows homeowners to choose the most economical and convenient fuel source for their needs.

A standout characteristic of the G36D series is its clean, contemporary design. The fireplace features large viewing windows that are bordered by an elegant frame, offering an unobstructed view of the flames. The realistic log set and glowing embers create a visually stunning fire experience that mimics the ambiance of a traditional wood-burning fireplace without the associated maintenance.

The fireplaces are also equipped with state-of-the-art technology, including a reliable electronic ignition system, which ensures easy starts every time while enhancing safety. The G36D series features adjustable flame height settings, allowing users to customize their experience based on preference or room ambiance.

In terms of efficiency, the G36D fireplaces boast an annual fuel utilization efficiency (AFUE) rating that meets modern energy standards. This characteristic not only contributes to environmental sustainability but also results in lower utility costs over time.

Moreover, the G36D series is designed with a user-friendly interface, allowing homeowners to operate their fireplace with ease. With optional remote controls and wall switches available, adjusting the settings has never been more convenient.

The Regency G36D-LP and G36D-NG are perfect for those who seek the charm of a fireplace with the benefits of modern innovation. Their blend of aesthetic appeal, advanced technology, and efficient heating makes them a standout choice for any homeowner looking to enhance their living space.
Top Page Image Contents