Description, General Safety Information | Wayne BRSPT130 instruction

Operating Instructions and Parts Manual	BRSPT130

Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or property damage! Retain instructions for future reference.

Submersible Sump

Pump

Description

The submersible pump is designed for indoor home sump applications. The unit is equipped with an 8-ft long, 3-prong grounding type power cord. Motor is oil filled and sealed for cooler running and designed to operate under water. A float switch is provided for automatic pump operation. This pump is not suitable for aquatic life.

General Safety

Information

Do not use to pump flammable or explosive fluids such as gasoline, fuel oil, kerosene, etc. Do not use in a flammable and/or explosive atmosphere. Pump should only be used to pump clear water. Personal injury and/or property damage could result.

This pump is not designed to handle

salt water, brine, laundry discharge or any other application which may contain caustic chemicals and/or foreign materials. Pump damage could occur if used in these applications and will void warranty.

All wiring must be performed by a

qualified electrician. Failure to follow this warning could result in fatal electrical shock.

If the basement has water or moisture on the floor, do not walk on wet area

until all power is turned off. If the shutoff box is in the basement, call an electrician. Remove pump and either repair or replace. Failure to follow this warning could result in fatal electrical shock.

A backup system should be used.

Blue Angel™ offers Model BSP15 and BSP25

Installation

1.Install pump in a sump pit with minimum size as shown in Figure 1. Construct sump pit of tile, concrete, steel or plastic.

2.The unit should be located and rest on a solid, level foundation. Do not place pump directly on clay, earth, gravel or sandy surface. These surfaces contain small stones, gravel, sand, etc. that may clog or damage the pump and cause pump failure.

Flood risk. If flexible discharge

hose is used, make sure pump is secured in sump pit to prevent movement. Failure to secure pump could allow pump movement and switch interference and prevent pump from starting or stopping.

3.Thread check valve (Blue Angel™ offers Model 66005-BLA1) into pump body carefully to avoid stripping or cross threading. Do not use pipe joint sealant.

4.Connect 1-1/2" rigid pipe to rubber boot on check valve. Reverse boot for 1-1/4" diameter pipe. Tighten hose clamps.

Support pump and piping when

assembling and after installation. Failure to do so could cause piping to break, pump to fail, etc. which could result in property damage and/or personal injury.

	Grounded	Min. Diameter
	Outlet
	Outlet	Tether 14"
		Tether 14"

24"

			Figure 1
14"

5.Protect electrical cord from sharp objects, hot surfaces, oils, and chemicals. Avoid kinking the cord and replace damaged cords immediately.

IMPORTANT: Make sure there is adequate room for the switch to operate.

6.A sump pit cover must be installed to prevent debris from clogging or damaging the pump or interfering with pump.

Operation

Always disconnect the power source before attempting to install,

service, relocate or maintain the pump. Never touch sump pump, pump motor, water or discharge piping when pump is connected to electrical power. Never handle a pump or pump motor with wet hands or when standing on wet or damp surface or in water. Fatal electrical shock could occur.

1.A ground fault circuit interrupter (GFCI) is required.

Risk of electrical shock! This pump is

supplied with a grounding conductor and grounding type attachment plug. Use a grounded receptacle to reduce the risk of fatal electrical shock.

Never cut off the round grounding prong. Cutting the cord or plug will void the warranty and make the pump inoperable.

Figure 2

For parts, product & service information

350800-002 1/07

visit www.blueangelpumps.com

350800-002, BRSPT130, ESP25 specifications

The Wayne ESP25,350800-002,BRSPT130 is a cutting-edge product designed for efficiency and adaptability in various applications. This advanced equipment leverages state-of-the-art technologies to deliver optimal performance, whether it is being used in commercial, industrial, or residential settings.

One of the standout features of the Wayne ESP25 is its powerful motor. Capable of dealing with demanding tasks, the motor offers robust performance that ensures reliable operation over extended periods. This feature is particularly beneficial in environments where uninterrupted functionality is crucial.

The unit's design employs high-quality materials that enhance its durability, making it suitable for use in challenging conditions. Its rugged construction not only extends its lifespan but also reduces maintenance needs, allowing users to focus on productivity rather than frequent repairs or replacements.

In terms of technology, Wayne has integrated advanced monitoring and control systems. These systems provide real-time feedback and diagnostics, enabling users to track performance metrics and identify potential issues before they escalate. The intuitive interface ensures that even those who may not be technically inclined can operate the system with ease.

Another notable characteristic of the ESP25 is its energy efficiency. Designed with sustainability in mind, this model utilizes energy-conserving technologies that help minimize operational costs. By reducing energy consumption, it not only supports eco-friendly initiatives but also provides significant savings for users over time.

Moreover, the Wayne ESP25,350800-002,BRSPT130 has been crafted with versatility in mind. It can be adapted for various applications, from hydraulic systems to sprinkler setups, making it a perfect choice for diverse industries. This flexibility enhances its appeal, allowing businesses to invest in one reliable piece of equipment that meets multiple needs.

The device is also equipped with user-friendly features such as quick disconnect options and simple installation procedures. This attribute not only simplifies initial setup but also facilitates quick changes or upgrades, further adding to its functionality.

In conclusion, the Wayne ESP25,350800-002,BRSPT130 combines powerful performance with advanced technologies and user-oriented design. Its efficiency, durability, and adaptability make it a compelling choice for anyone seeking reliable equipment that can meet the demands of a variety of applications. By investing in this product, users gain a dependable tool that optimizes productivity while minimizing costs.

BRSPT130