4 Replacement Procedures
3.Carefully insert your fingers between the display mask and the LCD panel, and pry open the latches. Start with the four latches at the top of the display mask. Continue releasing the latches along the two sides and the bottom edge to remove the display mask.
Figure 4-34 Removing the display mask
Installing the Display Mask
To install the display mask, follow the steps below and refer to the figures in the preceding section.
1.Seat the display mask and press firmly all around to secure the latches on each side.
2.Secure the display mask with four M2.5x6 screws and then replace the rubber pads on top.
Satellite A210/ A215, Satellite Pro A210, EQUIUM A210, SATEGO A210 Series Maintenance Manual
