4 Replacement Procedures

4.15 Camera and Microphone

To remove the camera and microphone, first remove the display assembly, display mask, FL inverter board and the LCD display module. Then follow the steps below.

1.Remove the CMOS cable from the camera module. Remove the camera module by gently peeling it away from its adhesive backing.

Figure 4-44 Removing the CMOS cable & camera

2.Use a flat screwdriver to lever the microphone module from its housing and gently lift it out.

Figure 4-45 Removing the microphone

4-40

Minnesota 10A/10AG Series Maintenance Manual

Page 169
Image 169
Toshiba a210 manual Camera and Microphone, Removing the Cmos cable & camera