4 Replacement Procedures
Installing the Expansion Memory Module
CAUTION: Do not touch the connectors on the expansion memory module or on the computer. Debris on the connectors may cause memory access problems.
Follow these steps to install a memory module:
1.Set the computer to boot mode and turn off the power.
2.Remove the black captive screw, with the RAM door, securing the memory module socket cover.
3.Slide your fingernail or a thin object under the cover and lift it off.
4.Fit the module's connectors into the computer's connectors at about a
5.Push the module down so it lies flat. The latches on either side will click into place to secure the module.
Minnesota 10A/10AG Series Maintenance Manual |
