31
Chapter 3
Instant Internet 400 hardware installation
This chapter helps you get to know your Instant Internet unit and provides instructions for connecting your unit to your LAN or WAN according to the type of connection you are using and for mounting the unit in a rack.
Before you install the Instant Internet hardware, make sure that you are familiar with the physical and environmental specifications of the Instant Internet
400unit. For more information, refer to Appendix A, “Technical specifications,” on page 51.
Getting to know your Instant Internet 400 unit
The front panel of your Instant Internet 400 unit has nine lights, or LEDs, that signal information about your unit. The Power LED is always lit when your unit is turned on. The other eight LEDs as well as the Power LED indicate various active or error conditions.
Figure 1 illustrates the front panel of the unit.
Figure 1 Front panel of the Instant Internet 400 unit
Instant Internet
Power | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 |
9276EA
For a description of the LEDs, refer to Chapter 5, “LEDs: support and diagnostic functions,” on page 47.
