41

Chapter 4

DIP switch settings

This chapter describes the Dual Inline Pins (DIP) switch settings for your Instant Internet 400 unit, including those for normal operation, for setting the token ring speed, and for resetting your unit’s password and configuration settings.

DIP switches

DIP switches enable you to configure your Instant Internet unit for a particular type of operation. There are eight DIP switches on the rear panel of your unit (Figure 6). The switches are labeled left to right from 1 to 8.

Figure 6 DIP switches on the rear panel of the unit

Configure

On

Off

1 2 3 4 5 6 7 8

9870EA

The switches have two possible positions: on and off. For the Instant Internet 400 unit, the on position is up and the off position is down. Use a small instrument with a fine point, such as a pen nib or small screwdriver, to move the switches to the proper position. Labels on the unit indicate whether a switch is on or off, and the specific switch pattern indicates a specific configuration item.

Setting Up the BayStack Instant Internet 400 Unit

Page 41
Image 41
Nortel Networks Instant Internet 400 Unit manual Chapter DIP switch settings, DIP switches