Nortel Networks Instant Internet 400 Unit LAN interfaces, Interface name Interface card Type

Chapter 3 Instant Internet 400 hardware installation 33

Table 2 shows the LAN interfaces available for your Instant Internet 400 unit.

Table 2 LAN interfaces

Interface name	Interface card			Type
Eth1	Ethernet			Ethernet connection on the
	10/100	AUI		back of the unit.
		Link Act
			9284EB
Eth2		RJ-45	BNC	Ethernet interface card with a
Eth3		Ethernet	Ethernet	BNC connector and an RJ-45
		LEDs		connector. Note: On some
				Ethernet interface cards the
				BNC connector can be absent.
				Note: If you have a triple
				Ethernet unit, the Ethernet card
				in slot D is Eth2 and the
				9285EB Ethernet card in slot C is Eth3.
Tok1		9-pin	RJ-45	Token ring interface card with a
Tok2		token ring	token ring	9-pin connector and an RJ-45
				connector. Note: If you have a
				dual token ring unit, the token
			4Mb/s	ring card in slot D is Tok1 and
				the token ring card in slot C is
			16Mb/s	Tok2.
				9286EB

Setting Up the BayStack Instant Internet 400 Unit