Nortel Networks Instant Internet 400 Unit manual Switch settings for special configurations

44Chapter 4 DIP switch settings

Switch settings for special configurations

During the power-up sequence, your Instant Internet 400 unit checks the settings of the switches. You can use the switches on your unit to:

•Reset the password (Table 11), which is useful if you forget the password.

•Reset the password and other user-defined system configuration (Table 12).

•Disable the switch settings for resetting the password and user-defined configurations (Table 13).

•Restore the original default factory settings (Table 14).

Table 11 shows the switch settings for resetting your unit’s password.

Table 11 Switch settings for resetting the password

	1	2	3	4	5	6	7	8
ON	•	•	•		•		•
OFF				•		•		•

Table 12 shows the switch settings for resetting your unit’s password as well as some user-defined configurations.

Table 12 Switch settings for resetting the password and user-defined configurations

	1	2	3	4	5	6	7	8
ON	•	•	•		•	•
OFF				•			•	•

Caution: If you use these switch settings to restore your unit, the

following user-defined settings are removed or reset: password, hosts, port mappings, and unit configuration.

300867-G