Pella 803V0102 installation instructions Finish, Care and Maintenance Important Notice

Page 11

APPLYING HEAD DRIP FIN - REQUIRED FOR VERTICAL MULLION APPLICATIONS

A.Apply a bead of sealant along the whole width of the mulled composite behind the exterior rib.

B.On vertical mulls, cut the head drip to the width of the units. Attach the head drip to the top of units aligning the ends and seal to the frame on both ends.

Note: The head drip may either be riveted to the fin or installed when the unit is installed. If the head drip is being installed with the unit, perform Step A at this time.

 

A"

B#

 

&

*

9

/

5

5

&

&

3

3

*

*

0

0

3

3

FINISH

The interior and exterior frame and sash are protected by a powder coat baked-on finish that requires no painting. Clean this surface with mild soap and water. Stubborn stains and deposits may be removed with mineral spirits. DO NOT use abrasives. DO NOT scrape or use tools that might damage surface.

Use of inappropriate solvents, brickwash or cleaning chemicals will cause adverse reactions with window and door materials and voids the Limited Warranty.

CARE AND MAINTENANCE

Care and maintenance information is available by contacting your local Pella sales representative. This information is also available on www.pellaimpervia.com.

IMPORTANT NOTICE

Because all construction must anticipate some water infiltration, it is important that the wall system be designed and constructed to properly manage moisture. Pella Corporation is not responsible for claims or damages caused by anticipated and unanticipated water infiltration; deficiencies in building design, construction and maintenance; failure to install Pella® products in accordance with Pella installation instructions; or the use of Pella products in wall systems which do not allow for proper management of moisture within the wall systems. The determination of the suitability of all building components, including the use of Pella products, as well as the design and installation of flashing and sealing systems are the responsibility of the Buyer or User, the architect, contractor, installer, or other construction professional and are not the responsibility of Pella.

Pella products should not be used in barrier wall systems which do not allow for proper management of moisture within the wall systems, such as barrier Exterior Insulation and Finish Systems, (EIFS) (also known as synthetic stucco) or other non-water managed systems. Except in the states of California, New Mexico, Arizona, Nevada, Utah, and Colorado, Pella makes no warranty of any kind and assumes no responsibility for Pella windows and doors installed in barrier wall systems. In the states listed above, the installation of Pella products in barrier wall or similar systems must be in accordance with Pella installation instructions.

Product modifications that are not approved by Pella Corporation will void the Limited Warranty.

Part Number: 803V0102

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Remember to USE Appropriate Personal Protective Equipment For complete details on http//warranty.pellaimpervia.comCut the water resistive barrier Rough Opening PreparationPrepare the Door for Installation Do not slide the bottom of the door into Setting and Fastening the DoorTWO or More People will be Required for Following Steps Insert the door from the exterior of the buildingflashing tape to prevent water from getting behind it Integrating the Door to the Water Resistive BarrierEntire nailing fin, but not Extend onto the door frame. Apply insulating foam sealant. From the interior, insert Reinstall the Vent Panel OX/XO Doors onlyInterior Seal Sealant line Sealing the Door to the Exterior Wall CladdingWidth of the transom frame Foot Bolt AdjustmentMulling Instruction Horizontal MullionsVertical Mullions Notch the ends of the fins. Measure Applying Installation FinsCut the fins to length. Using the following When applying fins to mulled products, place a lineFinish Care and Maintenance Important NoticeThis page left blank intentionally

803V0102 specifications

The Pella 803V0102 is an advanced window solution that combines modern design with cutting-edge technology, making it an ideal choice for homeowners seeking both aesthetics and performance. Known for its energy efficiency, the Pella 803V0102 features triple-pane glass that significantly reduces heat transfer, ensuring that homes remain comfortable regardless of the season. This multi-layered glass structure helps to keep indoor heating and cooling efforts efficient, thereby reducing energy bills over time.

One of the standout characteristics of the Pella 803V0102 is its innovative Low-E glass coating. This specialized coating reflects infrared light while allowing visible light to pass through, maximizing natural light while minimizing heat loss. The innovative design also contributes to the window's ability to reduce harmful UV rays, protecting furniture and flooring from fading, which is often a concern in sun-drenched areas.

In terms of durability, the Pella 803V0102 is engineered with robust frames crafted from high-quality materials. The frame construction is designed to withstand weather extremes, ensuring longevity and stability. Additionally, the window is equipped with a water-repellent exterior finish, which protects against moisture damage while requiring minimal maintenance over the years.

The Pella 803V0102 also boasts noise-reduction technologies, making it an excellent choice for homes in busy urban environments. The combination of multiple glass panes and specialized seals effectively dampens outside noises, creating a tranquil indoor atmosphere.

Security is another priority for the Pella 803V0102. The window is fitted with advanced locking mechanisms, which offer enhanced protection against break-ins, providing peace of mind for homeowners. Furthermore, the design of the window can accommodate various styles, making it suitable for different architectural preferences from traditional to contemporary homes.

Easy installation and customization options further enhance the appeal of the Pella 803V0102. Homeowners can choose from a variety of finishes, colors, and grille patterns to match their home’s style seamlessly.

In summary, the Pella 803V0102 represents a perfect blend of innovation, efficiency, and style. Its energy-saving features, acoustic performance, durability, and security technologies make it a leading choice for those looking to invest in high-quality windows that enhance both comfort and safety in their homes. Whether upgrading an existing home or building a new one, the Pella 803V0102 is poised to deliver exceptional value and performance.
Top Page Image Contents