Husqvarna DC5500 manuel dutilisation Safety Instructions

Page 5

Safety Instructions

Safety Instructions

WARNING

Under no circumstances may the machine be started without observing the safety instruc- tions. Should the user fail to comply with these, Husqvarna Construction Products Sweden AB or its representatives are free from all liability both directly and indirectly. Read through these operating instructions and make sure that you understand the contents before starting to use the machine. Should you, after reading these safety in- structions, still feel uncertain about the safety risks involved you must not use the machine, please contact your dealer for more informa- tion.

•Please read the operator’s manual carefully.

•Only qualified staff should be allowed to operate machinery.

•Never use a machine that is faulty. Carry out the checks, maintenance and service instructions described in this manual. All repairs not covered in this manual must be performed by a repairer nomi- nated by either the manufacturer or distributor.

•Always wear personal safety equipment such as sturdy non-slip boots, ear protection, dust mask and approved eye protection.

•The machine should not be used in areas where potential for fire or explosions exist.

•The machine should not be started without the dust collection bag attached.

•Never use the machine if you are tired, if you have drunk alcohol, or if you are taking medication that could affect your vision, your judgement or your co-ordination.

•Never use a machine that has been modified in any way from its original specification.

•Be on your guard for electrical shocks. Avoid having body contact with lightning-conductors/metal in the ground.

•Never drag the machine by means of the cord and never pull out the plug by pulling the cord. Keep all cords and extension cords away from water, oil and sharp edges.

•Make sure the cord is not pinched in doors, fences or the like.

•Check that the cord and extension cord are intact and in good condition. Never use the machine if the cord is damaged, hand it in to an authorized service workshop for repair.

•Do not use a rolled up extension cord

•The machine should be connected to an earthed outlet socket.

•Check that the mains voltage corresponds with that stated on the rating plate on the machine.

•Ensure the cord is behind you when you start to use the machine so that the cord will not be dam- aged.

At no time should lifting of machinery be attempt- ed without mechanical means such as a hoist or fork lift.

WARNING!

Overexposure to vibration can lead to circula- tory damage or nerve damage in people who have impaired circulation. Contact your doc- tor if you experience symptoms of overexpo- sure to vibration. These symptoms include numbness, loss of feeling, tingling, pricking, pain, loss of strength, changes in skin colour or condition. These symptoms normally ap- pear in the fingers, hands or wrists.

English - 5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Manual de Instrucciones Operator’s manualBedienungsanweisung Manuel d’utilisationContents English Key to symbols Safety Instructions Storage IntroductionTransportation What is what Diagram What is what On/Off swich Diagram Control boxFwd/Rev switch Operation dry use Setting upCleaning the primary filters Operation wet use Machine makes a low humming sound when switched to on TroubleshootingMachine will not run Machine is blowing dust out the exhaustDaily Inspection of Micro Filters MaintenanceEC-declaration of conformity Technical dataNoise emissions see note Sound levels see noteÍndice Español Significado de los símbolos Advertencia Instrucciones de seguridadAlmacenamiento IntroducciónTransporte Componentes de la máquina Componentes de la máquina DiagramaComponentes de la máquina Interruptor Fwd/Rev Diagrama Caja de controlInterruptor On/Off Puesta en marcha Manejo uso en secoLimpieza de los filtros primarios Cambio de las bolsas de polvoManejo uso mojado La máquina no funciona Localización de averíasLa máquina sólo funciona en una dirección La máquina no aspira muchoInspección diaria de los microfiltros MantenimientoDeclaración CE de conformidad Datos técnicosEmisiones de ruido vea la nota Niveles acústicos vea la notaInhalt Deutsch Symbole Achtung SicherheitsanweisungenLagerung EinleitungTransport Maschinenteile Abbildung MaschinenteileMaschinenteile Fwd/Rev-Schalter Abbildung SteuerkastenEin-/Ausschalter Einrichtung TrockenschleifenReinigung der Primärfilter Auswechseln des StaubbeutelsNassschleifen Störungsbehebung Tägliche Sichtprüfung der Mikrofilter WartungEG-Konformitätserklärung Technische DatenGeräuschemissionen siehe Anmerkung Lautstärke siehe AnmerkungSommaire Français Explication des symboles Avertissement Consignes de sécuritéRemisage Quels sont les composants? Diagramme Quels sont les composants? Interrupteur Fwd/Rev Diagramme Boîte de commandeInterrupteur On/Off Nettoyage des filtres primaires Fonctionnement utilisation sèchePréparations Fonctionnement utilisation avec eau La machine ne tourne pas Recherche de pannesLa machine émet un bourdonnement quand elle est mise sur on La machine ne tourne que dans une directionInspection journalière des micro-filtres Assurance de conformité UE Caractéristiques techniquesÉmissions sonores voir remarque Niveaux sonores voir remarque´z+UK¶0z¨ Page 1153436-20 2009-12-29

DC5500 specifications

The Husqvarna DC5500 is a cutting-edge dust collector designed for professional use in construction and renovation projects. Known for its efficiency and effective dust management capabilities, the DC5500 plays a vital role in maintaining a clean and safe work environment by minimizing airborne dust particles.

One of the key features of the Husqvarna DC5500 is its powerful suction capability. The unit is equipped with a robust motor that delivers exceptional airflow, ensuring that dust and particles are effectively captured at the source. With a suction power of 1800 m³/h, it can handle multiple heavy tasks simultaneously, making it ideal for use in conjunction with various power tools.

The DC5500 utilizes advanced filtration technology, featuring a high-efficiency particulate air (HEPA) filter that captures 99.99% of all particles 0.3 microns and larger. This high level of filtration is crucial for protecting the health of workers, especially in environments where fine particles are generated. The pre-filter extends the life of the HEPA filter by capturing larger dust particles before they reach it. The filter system is designed for easy cleaning, allowing operators to maintain optimal performance without frequent replacements.

Portability and ease of use are also notable characteristics of the DC5500. It features a compact design with integrated wheels, enabling easy movement around the job site. The lightweight construction means it can be transported without much effort, making it a suitable choice for contractors who work at different locations. Additionally, the ergonomic handle allows for comfortable carrying, adding to its user-friendly design.

The unit also boasts a range of connectivity options, allowing it to be seamlessly integrated with various Husqvarna power tools for efficient dust suppression. This connectivity not only enhances productivity but ensures a clean working atmosphere.

Durability is another hallmark of the Husqvarna DC5500. Built with high-quality materials that withstand the rigors of daily use, it is designed for long-lasting performance. With its reliable construction, contractors can trust that the DC5500 will be a valuable addition to their toolkit, ensuring cleaner air and a more productive workspace.

In summary, the Husqvarna DC5500 stands out for its powerful suction, advanced filtration technology, portability, and robust construction, making it an essential tool for professionals looking to manage dust effectively on job sites.
Top Page Image Contents