Troubleshooting, Machine will not run | Husqvarna DC5500 specs

Husqvarna DC5500 Troubleshooting, Machine will not run, Machine is blowing dust out the exhaust

Troubleshooting

Whilst every measure has been undertaken by the manufacturer to ensure smooth reliable operation of the machine, sometimes problems can arise.

The following possible problems may arise:

1.The machine will not run.

Ensure power connected to machine is on. If ma chine still will not run, remove cover from control box and test for presence of power supply at top of left side contactor. If no power at contactors, test power supply at power source. If power supply is ok at source but there is no supply at contactors in con trol box, check connections inside accessory power point. These checks should only be performed by a licensed electrician)

2.The machine makes a low humming sound when switched to ON.

This indicates there are only two-phases of power supply at the motor. Switch off machine immediately to avoid motor burn-out. Have an electrician check the machine to determine the cause of the missing phase. If all three-phases are ok at motor then there is a strong possibility the motor is faulty.

3.The machine will only run in one direction. This indicates a problem with either the FWD/REV switch mechanism or one of the contactors. Have an electrician test the machine.

4.The machine will run but there is not power at the accessory power point.

Check connections inside accessory power point.

5.The machine does not have much suction.

(A)Inspect inside secondary ﬁlter housing

and make sure secondary ﬁlters are not blocked with dust. If blocked up with dust, remove and clean ﬁlters by either tapping out or using compressed air.

IMPORTANT!

A respirator should be worn at all times when performing ﬁlter cleaning activities.

If large amounts of dust present in secondary ﬁlter housing, this indicates a problem with the primary ﬁlters. Usually this means there is a hole in one or more of the primary ﬁlters or one of the primary ﬁlters has come loose.

Check primary ﬁlters for small holes or perforations. Small holes can be repaired/patched using silicone sealant.

(B)Make sure ﬂap in bottom of collection cone is closing properly and creating a seal.

If this ﬂap is not functioning properly, machine will tend to suck up dust bag when switched on.

6.The machine is blowing dust out the exhaust.

(A)Normally this means the secondary ﬁlters

are not installed properly and dust is bypassing them. Ensure the seals on the ends of the second ary ﬁlters opposite the secondary ﬁlter housing door are creating a proper seal. This can be viewed by looking down the ﬁlter link hose coupling.

(B) Secondary ﬁlters may need replacing.

English - 13

DC5500 specifications

The Husqvarna DC5500 is a cutting-edge dust collector designed for professional use in construction and renovation projects. Known for its efficiency and effective dust management capabilities, the DC5500 plays a vital role in maintaining a clean and safe work environment by minimizing airborne dust particles.

One of the key features of the Husqvarna DC5500 is its powerful suction capability. The unit is equipped with a robust motor that delivers exceptional airflow, ensuring that dust and particles are effectively captured at the source. With a suction power of 1800 m³/h, it can handle multiple heavy tasks simultaneously, making it ideal for use in conjunction with various power tools.

The DC5500 utilizes advanced filtration technology, featuring a high-efficiency particulate air (HEPA) filter that captures 99.99% of all particles 0.3 microns and larger. This high level of filtration is crucial for protecting the health of workers, especially in environments where fine particles are generated. The pre-filter extends the life of the HEPA filter by capturing larger dust particles before they reach it. The filter system is designed for easy cleaning, allowing operators to maintain optimal performance without frequent replacements.

Portability and ease of use are also notable characteristics of the DC5500. It features a compact design with integrated wheels, enabling easy movement around the job site. The lightweight construction means it can be transported without much effort, making it a suitable choice for contractors who work at different locations. Additionally, the ergonomic handle allows for comfortable carrying, adding to its user-friendly design.

The unit also boasts a range of connectivity options, allowing it to be seamlessly integrated with various Husqvarna power tools for efficient dust suppression. This connectivity not only enhances productivity but ensures a clean working atmosphere.

Durability is another hallmark of the Husqvarna DC5500. Built with high-quality materials that withstand the rigors of daily use, it is designed for long-lasting performance. With its reliable construction, contractors can trust that the DC5500 will be a valuable addition to their toolkit, ensuring cleaner air and a more productive workspace.

In summary, the Husqvarna DC5500 stands out for its powerful suction, advanced filtration technology, portability, and robust construction, making it an essential tool for professionals looking to manage dust effectively on job sites.