Electrolux LU4 9QQ user manual Installation of window kit, Hole Insect guard net Projection

Installation of window kit

Window kit is not supplied to all markets

Installation in a double-hung sash window

1.Connect the rain guards to the insect guard net.

•Insert all three projections on each rain guard into the holes in the insect guard net.

•Side “A” will now be uppermost, as indicated in the diagram.

Hole

Insect guard net

“A”

Projection

2.Attach the guard combined above to the window panel

•Push the insect guard net firmly to ensure that its fourprojections fit into the holes in the window panel.

•Side “A” will now be at the top, as indicated in thediagram.

Projection

Window panel

“A”

electroluxelectroluxEXP09CS1WIEXP09CS1WIinstallationfrofnt/rearwindowviewkit

3.Cut the foam seal A (adhesive type) to the proper length and attach it to the window sill

Foam seal A (adhesive type)

4. Attach the window panel to the window sill

(A)If the inner width of the window is between 559mm and 609mm inclusive:

The window panel cannot be installed in windows less than 559mm wide, as you will be unable to shut the exhaust cover.

In such cases the exhaust cover will have to be removed prior to installing the window panel.

•Remove the adjustment panel from the window panel, and cut the window panel to the same width as the window

•Open the window sash and place the window panel on the window sill

•Secure the window panel to the window stool with 2 screws

		Exhaust cover
Window		Cut
panel
	Adjustment panel

Window panel

559mm - 609mm

Window sill