18 plasmacluster/manual operation electrolux EXP09CS1WI
Plasmacluster operation | Manual operation |
The Plasmacluster ion generator inside the air conditioner will release positive and negative Plasmacluster ions into the room. Approximately the same numbers of positive and negative ions released into the air will reduce some airborne mould, allergens and viruses.
1.Press the PLASMACLUSTER button during operation.
•The remote control will display “
”.
•The blue PLASMACLUSTER lamp on the unit will illuminate.
Use this mode when the remote control is not available
1.Press the MANUAL button on the unit.
•The red OPERATION lamp on the unit will illuminate.
•If the unit has not been unplugged since its last operation it will resume operation at its last settings.
•If the unit has been unplugged since its last operation, it resumes operation in the cooling mode, set at 20°C with the fan speed set to AUTO.
�
To cancel
Press the PLASMACLUSTER button again.
• The PLASMACLUSTER lamp on the unit will turn off.
NOTES:
•Use of the PLASMACLUSTER function will be memorised and it will be activated the next time you turn on the air conditioner.
•To turn off the PLASMACLUSTER lamp, press the DISPLAY button.
•PLASMACLUSTER operation cannot be set during VENTILATION mode.
�
To turn off
Press the MANUAL button again.
• The red OPERATION lamp on the unit will turn off.
NOTES:
•If the MANUAL button is pressed during normal operation, the unit will turn off.
•Upon starting MANUAL operation, the drainage pump inside the unit runs for about a minute, which may produce an audible gurgling sound.