12 installationoperating cofndwindowtions/energykit electroluxtips/inclusionsEXP09CS1WIelectrolux EXP09CS1WI
Installation in a sliding sash window (cont.)
(B)If the inner width of the window is between 609mm and 934mm inclusive:
•Open the window sash and place the window panel on the window stool.
•Slide the adjustment panel to fit the window frame width.
•Secure the window panel to the sill with 3 screws.
Adjustment panel
609mm - 934mm
5.Cut the foam seals A and B (adhesive type) to the proper length and attach it to the window panel
•Attach foam seal A to the window panel and extension panel, and attach foam seal B to the adjustment panel.
Foam seal B (adhesive type)
Foam seal A (adhesive type)
C)If the inner width of the window is between 609mm and 934mm inclusive:
•Attach the extension panel to the adjustment panel.
•Open the window sash and place the window panel on the window stool.
•Slide the adjustment and extension panels to fit the window frame width.
•Secure the window panel to the window stool with 4 screws.
Extension panel
6.Close the window sash securely against the window panel
7.Cut the foam seal to an appropriate length and seal the opening between the top of the inner window sash and the outer window sash
934mm - 1219mm
Foam seal
8. Attach a bracket with the screw
Bracket