Operating Instructions
USING THE REMOTE |
|
|
|
CONTROLLER | 1 |
| 2 |
|
| ||
|
|
| |
BUTTONS | ON/OFF |
| MODE |
3 |
| 3 | |
| TEMP | S | TEMP |
| UP | DOWN | |
|
| ENERGY |
|
|
| SAVER |
|
| FAN |
| TIMER |
| CLEAN |
| SLEEP |
| AIR |
|
|
AUTO OPERATION
Ensure the unit is plugged in and power is available.
1)Press the ON/OFF button to start the air conditioner.
2)Press the mode button and select AUTO.
3)Press the TEMP UP / DOWN button to set the desired temperature. The temperature can be set within a range of 17°C~ 30°C in 1°C increments.
NOTE
1.In the Auto mode, the air conditioner can logically choose the mode of Cooling, Fan, Heating and Dehumidifying by sensing the difference between the actual ambient room temperature and the set temperature on the remote controller.
2.In the Auto mode, you can not switch the fan speed. It has already been automatically controlled.
3.If the Auto mode is not comfortable for you, the desired mode can be selected manually.
|
|
| COOLING /HEATING/FAN OPERATION |
|
|
| Ensure the unit is plugged in and power is |
1 |
| 2 | available. |
ON/OFF |
| MODE |
|
3 |
| 3 1) Press the ON/OFF button to start the air | |
TEMP | S | TEMP | conditioner. |
UP | DOWN | 2) Press the MODE button to cool, heat | |
|
|
| |
4 | ENERGY |
| (cooling and heating models only) or fan |
SAVER |
| ||
FAN |
| TIMER | mode. |
|
|
| 3) Press the TEMP UP / DOWN button to |
CLEAN |
| SLEEP | set the desired temperature. The |
AIR |
|
| temperature can be set within a range of |
17°C~ 30°C in 1°C increments.
4)Press the FAN button to select the fan speed in three steps- Low, Med,or High.
NOTE:
In the Fan mode, the setting temperature is not displayed in the remote controller and you are not able to control the room temperature either. In this case, only step 1, 3 and 4 may be performed.
|
|
|
| DEHUMIDIFYING OPERATION |
|
|
| 2 | Ensure the unit is plugged in and power is |
1 |
|
| available. | |
|
|
| ||
ON/OFF |
| MODE |
|
|
3 |
|
| 3 1) Press the ON/OFF button to start the air | |
TEMP | S | TEMP |
| conditioner. |
UP | DOWN |
| 2) Press the MODE button to select auto. | |
| ENERGY |
|
| |
|
|
| 3) Press the TEMP UP / DOWN button to | |
| SAVER |
|
| |
FAN |
| TIMER |
| set the desired temperature. The |
|
|
|
| temperature can be set within a range of |
CLEAN |
| SLEEP |
| 17°C~ 30°C in 1°C increments. |
AIR |
|
|
|
|
NOTE:
In the Dehumidifying mode, you can not switch the fan speed. It has already been automatically controlled.
11