Operating Instructions
USING THE REMOTE
CONTROLLER
SWING OPERATION
Use the SWING button to adjust the Left/Right airflow direction.
BUTTONS
ON/OFF MODE
1 | 1) Press this button while the unit is |
| |
| operational, the vertical louvers |
TEMP | TEMP |
UP | DOWN |
| SWING |
FAN | TIMER |
| SLEEP |
ON/OFF |
| MODE |
TEMP | S | TEMP |
UP | DOWN | |
| ENERGY |
|
| SAVER |
|
FAN |
| TIMER |
CLEAN |
| SLEEP |
AIR |
|
|
ON/OFF |
| MODE |
TEMP | S | TEMP |
UP | DOWN | |
| ENERGY |
|
| SAVER |
|
FAN |
| TIMER |
CLEAN |
| SLEEP |
AIR |
|
|
automatically swing right and left |
sweeping the cold/hot air alternately to |
obtain comfortable cooling/heating. |
2) Press the SWING button again to stop |
the swing operation. |
SLEEP OPERATION
•In this mode, the selected temperature will increase(in cooling mode) / decrease (in heating mode) by 2°F 30 minutes after the mode is selected.
•The temperature will then increase by another 2°F after an additional 30 minutes.
•This new temperature will be maintained for 7 hours before it returns to the
1 originally selected temperature. This ends the Sleep mode and the unit will continue to operate as originally programmed.
•The Sleep mode program can be cancelled at any time during operation by again pressing the Sleep button.
TIMER OPERATION
press the TIMER button can set the Auto- start and
NOTE:
•To set
•To set
To set the Auto-start time.
1.Push the TIMER button when the unit is
1 off, only the
2.Keep pressing the TIMER button, each press will increase the selected time by 1 hour increments, up to 12 hours.
3.The time can be set in a range of 0~12 hours.
4.After the desired time has established, wait for about 10 seconds until the setting temperature reverts back in the display window of the air conditioner. This indicates the program is set.
12