Integra DTR-6.2 instruction manual Connections

Page 12

Connections

Here is explanation of how to connect the main components to the DTR-6.2 in the standard manner. There are many ways that any one component can be connected, and it is up to you to decide which method best fits your situation. The directions given here are only one option and should only be thought of as such. It is best to fully understand the nature of each connector and terminal as well as each of your components and their features to ascertain which method of connection is best.

•Be sure to always refer to the instructions that came with the component that you are connecting.

•Insert all plugs and connectors securely. Improper connections can result in noise, poor performance, or damage to the equipment.

Improper connection

Inserted completely

•Do not plug in the power cord until all connections have been made.

•For input jacks, red connectors (marked R) are used for the right channel, white connectors (marked L) are used for the left channel, and yellow connectors (marked V) are used for video connection.

•Do not bind audio/video connection cables with power cords and speaker cables. Doing so may adversely affect the picture and sound quality.

•When using the digital inputs, make sure to also connect the analog connections whenever possible.

Connecting antennas [22, 23]

 

Connect to devices with z

Connecting your video

terminals [16]

components [14, 15]

•When using one of the optical input jacks, remove the protective cap and keep it safely. When the jack is not used, replace the protective cap.

•When using an optical input jack, always use an optical fiber cable.

Optical digital input terminal

An optical digital input terminal is equipped with a protection cap. When connecting, remove this cap. When not using, put the cap back on the terminal.

Cautions regarding the AC

OUTLETS connectors [16]

12V TRIGGER A, B terminals

[17]

Connecting speakers [17-19]

ANTENNA

 

12 V

 

 

 

 

 

COMPONENT VIDEO

 

 

 

TRIGGER

Y

 

PB

PR

Y

PB

PR

Y

PB

PR

 

 

AM

 

A

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

OUTPUT

 

 

INPUT 1

 

 

INPUT 2

 

 

 

 

 

 

 

IN

OUT

IN

OUT

IN

IN

IN

 

 

 

 

 

 

 

 

 

 

 

 

 

 

VIDEO

 

 

B

 

 

 

 

 

 

 

 

 

 

 

FM

 

 

 

MONITOR

DVD

VIDEO 1

VIDEO 2

VIDEO 3 VIDEO 4

 

75

 

REMOTE

 

OUT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CONTROL

 

 

 

 

 

 

 

 

 

S VIDEO

 

 

 

 

 

 

 

 

 

 

 

 

 

PHONO

CD

 

TAPE

 

 

 

 

 

 

 

 

ZONE 2

OUT

IN

 

 

 

 

 

 

 

PRE OUT

L

 

 

 

 

 

 

 

 

 

 

 

 

L

R

 

 

 

 

 

 

 

 

 

 

 

 

R

 

FRONT

SURR

CENTER

OPTICAL

COAXIAL

 

 

 

IR

 

 

L

 

 

 

1

2

 

 

 

 

 

IN

GND

 

 

 

 

 

 

1

RS 232

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2

 

 

 

OUT

 

 

R

 

SUB

 

 

 

 

 

 

 

 

 

SUBWOOFER

 

 

 

 

 

 

 

 

 

 

 

 

MULTI

 

WOOFER

 

 

 

 

 

 

 

 

PRE OUT

CHANNEL INPUT

 

DIGITAL INPUT

 

 

 

 

 

FRONTCENTER

SPEAKERSSPEAKER

RL

AV RECEIVER

MODEL NO. DTR-6.2

PRE OUT

FRONT SURR CENTER

L

1

R

2

SURROUND

SPEAKERS

RL

 

ZONE 2

 

 

SPEAKERS

 

R

L

 

CAUTION:

 

AC INLET

SEE INSTRUCTION MANUAL

FOR CORRECT SETTING.

 

6 OHMS

4 OHMS

 

MIN.

MIN.

 

/ SPEAKER

/ SPEAKER

 

SET BEFORE POWER ON

IMPEDANCE SELECTOR

AC OUTLETS

AC 120V 60 Hz

SWITCHED

TOTAL 120W 1 A MAX.

Connecting a subwoofer [18]

RS232 port [17]

Connecting power amplifiers [16]

Plugging in the power cord to the AC INLET receptacle [17]

Connecting your audio components [13]

Connect to devices with

Operating components

Connecting the remote

multichannel output [17]

not reached by the remote

zone speakers [19]

 

controller signals [20]

 

 

Default setting

 

Input source

Digital input

Component video

Multichannel

DVD

COAX 1

INPUT 1

Yes

Video 1

COAX 2

INPUT 2

No

Video 2

----

INPUT 1

No

Video 3

OPT 2

INPUT 1

No

Video 4

----

INPUT 1

No

Tape

----

 

No

FM

 

 

 

AM

 

 

 

Phono

----

 

No

CD

OPT 1

 

No

COAX: Coaxial OPT: Optical ----: No setting

: Not applicable

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents DTR-6.2 Important Safeguards AvisPrecautions Contents Contents Features Supplied accessories40 FM/AM random presets FM auto tuning RS 232 Control portBefore using this unit Installing the remote controller batteriesUsing the remote controller Front panel facilities Front panelFront panel display Front panel facilities Remote controller Remote controller Connections Connecting your audio components Connecting a turntable PhonoConnecting a compact disc player CD ConnectionsConnecting your video components Flow of the video signals is as followsConnecting a DVD player DVD Connecting a video cassette recorder Video Connecting a satellite tuner or television VideoConnecting a television monitor or projector Connecting settop box or video camera, etc. VideoConnecting power amplifiers Connect to devices with z terminals12V Trigger A, B terminals Connecting speakers Plugging in the power cord to the AC Inlet receptacleConnect to devices with multichannel output RS 232 portConnecting speakers Connecting speakersConnecting the speaker cable Connecting a subwooferWhen using the Zone 2 Speakers terminals When using the Zone 2 OUT terminalsListening to music in the remote zone From connecting block Other componentConnecting the power Connecting antennas Connecting the AM antenna cableConnecting the included antennas Assembling the AM loop antennaConnecting antennas Connecting an FM outdoor antennaConnecting an AM outdoor antenna Directional linkageSpeaker setup Speaker Configuration submenuPress the Setup button Buttons to be usedSpeaker setup Speaker Distance submenuAbout the other settings Turn the jog dial to adjustLevel Calibration submenu Press the jog dial againTuning into a radio station Listening to a stereo radio station FM modeListening to Radio Broadcasts Presetting a radio station Selecting a preset radio station Erasing a preset radio stationListening to Radio Broadcasts Adjusting the bass and treble Listening with headphonesEnjoying music or videos with the DTR-6.2 Temporarily turning off the soundSwitching the display Adjusting the brightness of the front displayUsing the sleep time remote controller only Enjoying music or videos with the DTR-6.2Changing the audio mode Using the tone controlAdjust the tone using the Bass and Treble dials Enjoying the multichannel outputUsing listening mode Listening modesUsing listening mode Changing the listening modeUsing Cinema Re-Equalization Listening Mode Buttons Re-EQSetup menus Main menuMenu Sub menuSetup menus Navigating through the Setup menuSetting procedures and button operations Speaker Config sub-menu Speaker Distance sub-menu Level Calibration sub-menuCalibrating the speaker levels Audio Setup sub-menu Digital InputMultichannel Video Setup sub-menu Listening Mode Preset sub-menuInput source signals IntelliVolume sub-menu IntelliVolumeTrigger sub-menu 12V Trigger aVolume Setup sub-menu Description listening mode parameters Maximum VolumePower On Volume Front EffectHeadphones Level sub-menu IR in Setup sub-menuLate Night Setup sub-menu Powered Zone 2 Setup sub-menuOSD Setup sub-menu OSD Position sub-menuRecording Recording the input source REC OUT selectorRecording both the audio and video Recording a source different from that you are listening toEnjoying music in the remote zone Using remote controller Calling up a preset radio stationControlling an Integra/Onkyo cassette tape deck Press the desired operation buttonUsing remote controller Press the CD Mode buttonControlling an Integra/Onkyo CD player To 9, +10 Numeric keysPress the DVD Mode button Controlling an Integra/Onkyo DVD playerButton OperationSAT, CABLE, VCR, and TV Mode buttons Press the MD Mode buttonMD Mode VOL Controlling an Integra/Onkyo MD recorderSEND/LEARN indicator Buttons that Learning a pre-programming codeLearning a pre-programming code Within 30 seconds, enter the 3-digit code numberLearning a pre-programming code Pre-programmong codesOperating your programmed remote controller DVD Mode DVD Player ModeSAT Mode Satellite Tuner Mode Cable Mode Cable ModeOperating your programmed remote controller VCR Mode VCR ModeTV Mode TV Mode Press the VCR Mode buttonProgramming procedure IndicatorTo 15 cm Buttons that cannot be programmedPage Erasing the programmed command from one button Erasing all the commands programmed under a Mode buttonPress and release the same Mode button again SEND/LEARN indicator Mode buttonsUsing a Macro function Press the Mode Macro button to complete the programmingProgramming a Macro function Running a Macro functionUsing a Macro function Programming the Direct Macro functionRunning a Direct Macro function Erasing a macro from the Mode Macro button Press the Mode Macro button againDirect Macro Mode buttons Erasing a direct macro from the Direct Macro buttonErasing all commands and macros that have been programmed Macro mode programming memoPress the Enter button OperationSpecifications Amplifier SectionTroubleshooting guide Troubleshooting guide Video and AudioIf one of the messages shown below appears Onkyo U.S.A. Corporation

DTR-6.2 specifications

The Integra DTR-6.2 is a high-performance 9.2-channel AV receiver that brings a new level of audio and visual experience to your home theater. Engineered with audiophiles and home cinema enthusiasts in mind, this receiver combines advanced technology with an array of impressive features designed to elevate your entertainment setup.

One of the standout characteristics of the DTR-6.2 is its support for 8K video resolution, making it future-proof for the latest high-definition content. With HDMI 2.1 inputs, it allows for 8K60 and 4K120 pass-through, providing a seamless connection to next-generation gaming consoles and ultra-high-definition displays. It also supports HDR formats such as HDR10+, Dolby Vision, and HLG, ensuring vibrant and lifelike images.

In terms of audio performance, the Integra DTR-6.2 supports advanced sound formats, including Dolby Atmos and DTS:X. These technologies enable object-based audio, allowing sound to be placed and moved in a three-dimensional space, enhancing the immersion of your viewing experience. The receiver is also equipped with Dirac Live room correction technology, which automates the calibration of your sound setup, compensating for the acoustic characteristics of your room and delivering optimal audio fidelity.

The DTR-6.2 is powered by high-current amplifiers, capable of delivering 100 watts per channel, ensuring dynamic and powerful audio output for even the most demanding movie and music playback. The receiver offers multi-zone capabilities, allowing users to distribute audio and video signals to different areas of their home, making it a versatile choice for comprehensive home entertainment.

Streaming capabilities are abundant, with built-in support for popular platforms like Spotify, TIDAL, and Pandora. Additionally, the receiver features Bluetooth and Wi-Fi connectivity, permitting easy access to your favorite content from various devices. The Integra DTR-6.2 also integrates with smart home systems, offering seamless voice control compatibility with Amazon Alexa and Google Assistant.

With its robust construction, advanced feature set, and user-friendly interface, the Integra DTR-6.2 stands out as a premier choice for those seeking to design a sophisticated home theater system. Whether you're an avid movie watcher, a gamer, or a music lover, this AV receiver delivers exceptional audio and video quality, ensuring an immersive and engaging entertainment experience.
Top Page Image Contents