Integra DTR-6.2 instruction manual Front panel facilities

Page 9

Front panel facilities

For operational instructions, see page indicated in brackets [ ].

Power switch [21]

Turns on and off the main power supply for the DTR-6.2.

Standby indicator [7, 21]

Lights when the DTR-6.2 is in the standby state and flashes when a signal is received from the remote controller.

Standby/On button [21]

Press to turn on the DTR-6.2 when in the standby state. Press again to return the DTR-6.2 to the standby state.

Rec Out button [44]

Press the Rec Out button to output the audio signals to a recording component for recording purposes.

Zone 2 button [45] and indicator

Press the Zone 2 button to enjoy the output from the DTR-6.2 in a different room, which is referred to as a remote zone (Zone 2).

ZONE 2 indicator lights when a signal is output to the remote zone (Zone 2). When the ZONE 2 indicator is off, then either output to the remote zone is turned off or Rec Out is selected.

Zone 2 Level button [45]

Press to enter the mode for adjusting the volume in the remote zone (Zone 2).

CH Level button [30]

Press to select the channel whose level is to be adjusted.

Master Volume dial [29, 31]

The Master Volume dial is used to control the volume for the main zone. The volume for the remote zone (Zone 2) is independent.

Phones jack [29]

This is a standard stereo jack for connecting stereo headphones.

Audio Selector button [31]

This button is used to select the type of audio input signal. Each time pressed, the setting cycles from “AUTO” → “Multich” → “Analog” and back.

Input source buttons (DVD, Video 1–4, Tape, FM, AM, Phono, and CD) [27, 28, 29, 44, 45]

These buttons are used to select the input source for the main zone. To select the input source for the remote zone (Zone 2) or recording out (Rec Out), first press the Zone 2 or Rec Out button, and then the desired input source button.

Bass dial [31]

Boosts or cuts the bass response. Bass adjustment is effective only for the front L/R speakers and headphones.

Treble dial [31]

Boosts or cuts the treble response. Treble adjustment is effective only for the front L/R speakers and headphones.

Front display

Remote control sensor [7]

Smart Scan Navigator jog dial and indicators [24- 26, 28, 30, 31, 33, 35, 45]

Used to make settings in the Setup menu, change listening mode settings, and more.

Setup button [24-26, 35]

Press to bring up the Setup menu. The OSD menu will appear on the TV monitor as well as the front display on the DTR-6.2.

Return button [24-26, 35]

Press to exit the Main menu level or go back one level up.

Display button [30]

The DISPLAY button is used to display information about the current input source signal. Each time you press the display button, the screen changes to show you different information concerning the input signal.

Dimmer button [30]

Press to set the brightness of the front display. There are 3 settings available: normal, dark, and very dark.

FM Mode button [27]

If you are listening to an FM radio station in stereo and the sound cuts out or there is a great deal of noise, switch from STEREO to MONO. Each time this button is pressed, the AUTO indication flashes and the stereo mode changes from AUTO to MONO and vice versa. This button also turns on and off the FM MUTE.

Preset Memory button [28]

This button is used to assign the radio station that is currently tuned in to a preset channel or delete a previously preset station.

Tuning / buttons [27]

Use these buttons to change the tuner frequency. The tuner frequency is displayed in the front display and it can be changed in 50 kHz increments for FM and 10 kHz increments for AM.

When FM is selected, you can hold down one of the tuning buttons and then release it to activate the auto-search feature. It will search for a station in the direction of the button you pressed and stop when it tunes into one.

Preset / buttons [28]

When AM or FM is selected as the input source, press one of these buttons to jump to a radio station that you preset using the Preset Memory button. Pressing the right button moves from the most recently preset station to older ones, and pressing the left button moves in the reverse order.

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents DTR-6.2 Avis Important SafeguardsPrecautions Contents Contents Supplied accessories Features40 FM/AM random presets FM auto tuning RS 232 Control portBefore using this unit Installing the remote controller batteriesUsing the remote controller Front panel facilities Front panelFront panel display Front panel facilities Remote controller Remote controller Connections Connecting a turntable Phono Connecting your audio componentsConnecting a compact disc player CD ConnectionsConnecting your video components Flow of the video signals is as followsConnecting a DVD player DVD Connecting a satellite tuner or television Video Connecting a video cassette recorder VideoConnecting a television monitor or projector Connecting settop box or video camera, etc. VideoConnecting power amplifiers Connect to devices with z terminals12V Trigger A, B terminals Plugging in the power cord to the AC Inlet receptacle Connecting speakersConnect to devices with multichannel output RS 232 portConnecting speakers Connecting speakersConnecting the speaker cable Connecting a subwooferWhen using the Zone 2 Speakers terminals When using the Zone 2 OUT terminalsListening to music in the remote zone Other component From connecting blockConnecting the power Connecting the AM antenna cable Connecting antennasConnecting the included antennas Assembling the AM loop antennaConnecting an FM outdoor antenna Connecting antennasConnecting an AM outdoor antenna Directional linkageSpeaker Configuration submenu Speaker setupPress the Setup button Buttons to be usedSpeaker Distance submenu Speaker setupTurn the jog dial to adjust About the other settingsLevel Calibration submenu Press the jog dial againTuning into a radio station Listening to a stereo radio station FM modeListening to Radio Broadcasts Presetting a radio station Selecting a preset radio station Erasing a preset radio stationListening to Radio Broadcasts Listening with headphones Adjusting the bass and trebleEnjoying music or videos with the DTR-6.2 Temporarily turning off the soundAdjusting the brightness of the front display Switching the displayUsing the sleep time remote controller only Enjoying music or videos with the DTR-6.2Using the tone control Changing the audio modeAdjust the tone using the Bass and Treble dials Enjoying the multichannel outputListening modes Using listening modeChanging the listening mode Using listening modeUsing Cinema Re-Equalization Listening Mode Buttons Re-EQMain menu Setup menusMenu Sub menuSetup menus Navigating through the Setup menuSetting procedures and button operations Speaker Config sub-menu Speaker Distance sub-menu Level Calibration sub-menuCalibrating the speaker levels Audio Setup sub-menu Digital InputMultichannel Video Setup sub-menu Listening Mode Preset sub-menuInput source signals IntelliVolume IntelliVolume sub-menuTrigger sub-menu 12V Trigger aMaximum Volume Volume Setup sub-menu Description listening mode parametersPower On Volume Front EffectIR in Setup sub-menu Headphones Level sub-menuLate Night Setup sub-menu Powered Zone 2 Setup sub-menuOSD Position sub-menu OSD Setup sub-menuRecording the input source REC OUT selector RecordingRecording both the audio and video Recording a source different from that you are listening toEnjoying music in the remote zone Calling up a preset radio station Using remote controllerControlling an Integra/Onkyo cassette tape deck Press the desired operation buttonPress the CD Mode button Using remote controllerControlling an Integra/Onkyo CD player To 9, +10 Numeric keysControlling an Integra/Onkyo DVD player Press the DVD Mode buttonButton OperationPress the MD Mode button SAT, CABLE, VCR, and TV Mode buttonsMD Mode VOL Controlling an Integra/Onkyo MD recorderLearning a pre-programming code SEND/LEARN indicator Buttons thatLearning a pre-programming code Within 30 seconds, enter the 3-digit code numberPre-programmong codes Learning a pre-programming codeDVD Mode DVD Player Mode Operating your programmed remote controllerSAT Mode Satellite Tuner Mode Cable Mode Cable ModeVCR Mode VCR Mode Operating your programmed remote controllerTV Mode TV Mode Press the VCR Mode buttonIndicator Programming procedureTo 15 cm Buttons that cannot be programmedPage Erasing all the commands programmed under a Mode button Erasing the programmed command from one buttonPress and release the same Mode button again SEND/LEARN indicator Mode buttonsPress the Mode Macro button to complete the programming Using a Macro functionProgramming a Macro function Running a Macro functionUsing a Macro function Programming the Direct Macro functionRunning a Direct Macro function Press the Mode Macro button again Erasing a macro from the Mode Macro buttonDirect Macro Mode buttons Erasing a direct macro from the Direct Macro buttonMacro mode programming memo Erasing all commands and macros that have been programmedPress the Enter button OperationAmplifier Section SpecificationsTroubleshooting guide Troubleshooting guide Video and AudioIf one of the messages shown below appears Onkyo U.S.A. Corporation

DTR-6.2 specifications

The Integra DTR-6.2 is a high-performance 9.2-channel AV receiver that brings a new level of audio and visual experience to your home theater. Engineered with audiophiles and home cinema enthusiasts in mind, this receiver combines advanced technology with an array of impressive features designed to elevate your entertainment setup.

One of the standout characteristics of the DTR-6.2 is its support for 8K video resolution, making it future-proof for the latest high-definition content. With HDMI 2.1 inputs, it allows for 8K60 and 4K120 pass-through, providing a seamless connection to next-generation gaming consoles and ultra-high-definition displays. It also supports HDR formats such as HDR10+, Dolby Vision, and HLG, ensuring vibrant and lifelike images.

In terms of audio performance, the Integra DTR-6.2 supports advanced sound formats, including Dolby Atmos and DTS:X. These technologies enable object-based audio, allowing sound to be placed and moved in a three-dimensional space, enhancing the immersion of your viewing experience. The receiver is also equipped with Dirac Live room correction technology, which automates the calibration of your sound setup, compensating for the acoustic characteristics of your room and delivering optimal audio fidelity.

The DTR-6.2 is powered by high-current amplifiers, capable of delivering 100 watts per channel, ensuring dynamic and powerful audio output for even the most demanding movie and music playback. The receiver offers multi-zone capabilities, allowing users to distribute audio and video signals to different areas of their home, making it a versatile choice for comprehensive home entertainment.

Streaming capabilities are abundant, with built-in support for popular platforms like Spotify, TIDAL, and Pandora. Additionally, the receiver features Bluetooth and Wi-Fi connectivity, permitting easy access to your favorite content from various devices. The Integra DTR-6.2 also integrates with smart home systems, offering seamless voice control compatibility with Amazon Alexa and Google Assistant.

With its robust construction, advanced feature set, and user-friendly interface, the Integra DTR-6.2 stands out as a premier choice for those seeking to design a sophisticated home theater system. Whether you're an avid movie watcher, a gamer, or a music lover, this AV receiver delivers exceptional audio and video quality, ensuring an immersive and engaging entertainment experience.
Top Page Image Contents