Integra DTR-5.5 Connecting a VCR for Recording, Playback from the Recording VCR, VCR recording

Page 31

DTR-6.5,5.5_En.book Page 31 Wednesday, July 28, 2004 9:07 AM

Connecting the AV receiver—Continued

Connecting a VCR for Recording

This section explains how to connect a VCR for recording from a TV or another VCR.

Video Connections

Use an S-Video cable to connect the AV receiver’s S VIDEO 1 OUT jack to an S-Video input on the recording VCR. Use another S-Video cable to connect the AV receiver’s S VIDEO 3 IN jack to an S-Video output on your TV or playback VCR, as shown.

OR

Use a composite video cable to connect the AV receiver’s V VIDEO 1 OUT jack to a composite video input on the recording VCR. Use another composite video cable to connect the AV receiver’s V VIDEO 3 IN jack to a composite video output on your TV or playback VCR, as shown.

Audio Connections

Use an analog audio cable to connect the AV receiver’s VIDEO 1 OUT L/R jacks to an audio input on the recording VCR.

Use an analog audio cable to connect the AV receiver’s VIDEO 3 IN L/R jacks to an audio output on your TV or playback VCR.

Playback from the Recording VCR

To play back a video in the recording VCR via the AV receiver:

• Use an S-Video cable to connect the AV receiver’s S VIDEO 1 IN jack to an S-Video output on the record- ing VCR.

OR

Use a composite video cable to connect the AV receiver’s V VIDEO 1 IN jack to a composite video output on the recording VCR. And use an analog audio cable to connect the AV receiver’s VIDEO 1 IN L/R jacks to an audio output on the recording VCR.

Notes:

The AV receiver must be turned on for recording. Recording is not possible while it’s in Standby mode.

If you want to record directly from your TV or play- back VCR to the recording VCR without going through the AV receiver, connect the TV/VCR’s audio and video outputs directly to the recording VCR’s audio and video inputs. See the manuals supplied with your TV and VCR for details.

Video signals connected to composite video inputs can only be recorded via composite video outputs. If your TV/VCR is connected to a composite video input, the recording VCR must be connected to a com- posite video output. Similarly, video signals con- nected to S-Video inputs can only be recorded via S-Video outputs. If your TV/VCR is connected to an S-Video input, the recording VCR must be connected to an S-Video output.

VCR (recording)

R

L

 

 

R

L

 

AUDIO

 

 

 

 

 

 

AUDIO

 

INPUT

 

 

 

OUTPUT

 

 

 

 

 

 

S VIDEO IN

VIDEO IN

VIDEO OUT

S VIDEO OUT

 

Connect one or the other

VIDEO 1

OUT IN

OUT IN

VIDEO 3

 

 

 

 

 

 

 

IN4

IN3

IN2

IN1

OUT

 

COAXIAL

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DIGITAL

 

IN

 

COMPONENT VIDEO

 

 

RS232

OPTICAL

 

 

 

 

 

IN 2

IN 1

O

 

OUT

 

 

 

 

 

 

 

 

 

 

 

IN 3

IN 2

IN 1

 

 

 

 

 

 

 

 

 

 

 

 

Y

 

 

 

VIDEO 3

VIDEO 2

 

VIDEO 1

DVD

MONITOR

 

PRE OUT

 

 

 

 

 

 

IN

OUT

IN

OUT

IN

IN

OUT

FRONT

SURR

CENTER

SURR

 

 

 

 

 

 

 

 

 

 

 

V

 

L

 

 

 

P

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

S

 

 

 

 

 

P

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

R

SUB

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

WOOFER

 

 

IN

IN

OUT

IN

IN

OUT

IN

OUT

IN

FRONT

SURR

CENTER

L

ZONE 2

 

 

 

 

 

 

 

OUT

 

 

L

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

GND

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

REM

 

R

 

 

 

 

 

 

 

 

 

 

 

 

 

CON

 

 

 

 

 

 

 

 

 

 

 

 

SUB

R

SUB

 

 

PHONO

CD

TAPE

 

VIDEO 3

VIDEO 2

 

VIDEO 1

 

DVD

WOOFER

 

WOOFER

 

IN

L

R

Connect one or the other

 

R

L

S VIDEO

AUDIO

 

OUT

OUTPUT

 

VIDEO

OUT: For recording : For playback

TV or VCR, etc.

31

Image 31
Contents DTR-6.5/5.5 Avis Important Safety InstructionsFCC Information for User PrecautionsPower For models having a power cord with a polarized plugIf in any doubt, consult a qualified electrician Supplied AccessoriesPrecautions Make sure you have the following accessoriesDTR-5.5 FeaturesDTR-6.5/5.5 DTR-6.5Table of Contents Table of Contents DTR-5.5 Front & Rear PanelsFront Panel DTR-6.5Front & Rear Panels Rear Panel DisplayIR IN/OUT Component Video in 1, 2, 3 28, 30RS232 12V Trigger OUT A/B/C 73Phono in DTR-6.5 only Optical Digital 27, 28, 30, 32, 34Coaxial Digital 27, 28, 30, 32, 34 Grounding screw DTR-6.5 onlyInstalling the Batteries Remote ControllerUsing the Remote Controller RC-585M Remote ControllerReceiver Mode Remote indicatorOn button Remote Mode buttonsListening mode buttons 58 Surrond button Standby buttonDVD Mode CD Mode Pause button MD/CDR ModePlay button Previous & Next / buttonsReverse Play button Tape ModeFR & FF Buttons Stop buttonEnjoying Home Theater About Home TheaterAV Connection Color Coding Connecting the AV receiverAbout AV Connections Optical Digital JacksConnecting Your Speakers Connecting the AV receiverConnecting the Speaker Cables Speaker Connection PrecautionsStrip about 5/8 15 mm Attach the FM antenna, as shown American Model Connecting AntennaConnecting the Indoor FM Antenna Connecting the AM Loop AntennaConnecting an Outdoor AM Antenna Connecting an Outdoor FM AntennaUsing a TV/FM Antenna Splitter Audio Connection Formats Connecting Both Audio & VideoWhich Connections Should I Use? Video Connection FormatsMonitor Out Connecting Your TV or ProjectorAudio Connections DVD player Connecting a DVD PlayerVideo Connections Your TV must also be connected via component videoUsing a Multichannel Connection Connecting a D-VHS VCR for Playback Connecting a VCR for PlaybackTV or VCR, etc Connecting a VCR for RecordingPlayback from the Recording VCR VCR recordingPRSatellite, cable, set-top box, LD player, etc Using Optical or Coaxial ConnectionsSatellite, cable, set-top box, LD player, etc Using Analog Connections Using S-Video Connecting a Camcorder, Games Console, etcCamcorder Games console, etc CD player Connecting a CD Player Connecting a Cassette RecorderConnecting a DAT, CD, or MD Recorder Analog ConnectionsDigital Recording Using Optical or Coaxial Connections playback onlyDigital source DAT, CD, MD player For the DTR-6.5 Connecting a TurntableFor the DTR-5.5 Is for connecting more -compatible components Connecting a Power Amplifier DTR-6.5 onlyConnecting Components When you start playback on an AV component conTurning On the AV receiver Connecting the Power Cords of Other ComponentsConnecting the Supplied Power Cord Connecting the RS232 PortAutomatic Speaker Setup First Time SetupFirst Time Setup Main menus About the Onscreen Setup MenusSubmenus Digital Input Initial SetupTor, and then use the Left Component Video SetupMain menu appears onscreen Buttons to select an input selecAnce Minimum, and then use Press the Receiver button fol- lowed by the Setup buttonMinimum Speaker Impedance not American models Buttons to select b. Sp ImpedThen use the Left and Right TV Format Setup not American modelsHere you can specify the TV format used in your area Buttons to select c. TV FormatButtons to select a. Subwoofer Speaker SetupSpeaker Setup menu appears Buttons to select 2. SpeakerCrossover Tance, and then press Enter DefaultDouble Bass Speaker DistanceButtons to specify the dis- tance Speaker Distance menu appearsRepeat for all speakers Subwoofer 0dB Speaker Level CalibrationEqualizer Setting Repeat this step to select TAPE, MD, or CDR Changing the TAPE/MD/CDR DisplayStart playback on the source component Only the RC-585M remote controller has a Phono buttonBasic Operation Selecting the Input SourceBasic Operation Setting the Display BrightnessUsing the Sleep Timer Using HeadphonesInterpreting Surround Channel Values Displaying Source InformationYou can display various information about the current Input source as followsUse the Tuner input selector Using the TunerTuning into Radio Stations Listening to the RadioDisplaying Radio Information Presetting Radio StationsSelecting Preset Stations Deleting PresetsTHX button DTR-6.5 only Selecting with the Remote ControllerSelecting on the AV receiver Surrond buttonMultich About the Listening Modes Onkyo Original DSP Modes Advanced Operation Using the Re-EQ FunctionUsing the Late Night Function Dolby Digital only Using the CinemaFILTER DTR-5.5 onlyAdvanced Operation Adjusting Individual Speaker LevelsRecording Audio RecordingRecording Separate AV Sources AV RecordingDolby Digital Advanced SetupDecoder Setup Analog/PCMMultiplex Advanced SetupDTS D.F chAudio Adjust menu appears Audio Adjust FunctionsSettings are explained below PLIIx/Neo6 MonoAssigning Listening Modes to Input Sources Theater-DimensionalPreference menu appears Setting PreferencesUse the Up and Down Buttons to select the signal for This section explains the items on the Preference menuRemote Setup IntelliVolumeVolume Setup OSD Setup6-7., 6-8 V Trigger Setup Changing the Remote Controller’s IDDigital Format Using a Receiver/Integrated Amp in Zone Using Only Speakers in ZoneZone Buttons to select 3. Hardware Buttons to select a. PoweredHardware Setup menu appears Zone 2, and use the LeftZone 2 OUT L/R jacks can also be used as pre Outs Hardware Setup menu appearsUsing Zone Using a Multiroom Kit with Zone Using the Remote Control in ZoneUsing the 12V Trigger Adjusting the Bass & Treble for Zone2Controlling Out-of-range Components Using a Multiroom Kit with a CabinetCodes for Integra DVD Players Entering Remote Control CodesSetting the MD/CDR Button to CDR Controlling Other ComponentsResetting the Remote Controller Resetting Remote Mode ButtonsControlling Other Components DVD DVD player Remote Control CodesSAT satellite receiver ABC CBL cable receiverDTR-6.5,5.5En.book Page 84 Wednesday, July 28, 2004 907 AM DTR-6.5,5.5En.book Page 85 Wednesday, July 28, 2004 907 AM Controlling a Cable Receiver Controlling a TVButtons Controlling a VCR Controlling a Satellite ReceiverRec NumberLearning Commands from Another Remote Controller Making Macros Using MacrosRunning Macros Troubleshooting Troubleshooting Zone 2 has turned off? Remote controller doesn’t work?Can’t control other components? Can’t record?Display doesn’t work? Sound changes when I connect my head- phones?Speaker volume cannot be set as required? Speaker distance cannot be set as required?Video Section Specifications DTR-6.5Amplifier Section GeneralSpecifications DTR-5.5 3 4 3 8 2

DTR-5.5 specifications

The Integra DTR-5.5 is a prominent model in the world of home theater receivers, combining cutting-edge technology and user-friendly features to deliver an exceptional audio-visual experience. Known for its power and versatility, the DTR-5.5 successfully caters to both casual listeners and home cinema enthusiasts.

At the heart of the Integra DTR-5.5 is its high-performance amplification system, delivering 85 watts per channel across seven channels. This robust power output allows the receiver to easily drive demanding speaker setups and fill large rooms with rich, vibrant sound. The incorporation of advanced technologies like Dolby Atmos and DTS:X enhances the audio experience by providing immersive surround sound. These formats allow for object-based audio, creating a three-dimensional sound environment that makes movie watching or music listening feel truly captivating.

One of the standout characteristics of the DTR-5.5 is its extensive connectivity options. The receiver features multiple HDMI inputs, including 4K and HDR support, ensuring compatibility with the latest video sources and display technologies. It also includes digital and analog audio inputs, as well as Zone 2 outputs, making it suitable for multi-room audio setups. The built-in Wi-Fi and Bluetooth capabilities enable easy streaming from various devices, catering to modern consumer needs.

The user interface is designed with convenience in mind. The receiver comes equipped with an intuitive on-screen display, allowing users to effortlessly navigate settings and configurations. The Audyssey MultEQ room calibration technology optimizes speaker placement and acoustic performance, ensuring that users achieve optimal sound quality tailored to their specific room conditions.

In terms of aesthetics, the Integra DTR-5.5 is sleek and modern, fitting seamlessly into any home theater setup. Its solid construction not only enhances durability but also helps reduce resonance and interference, resulting in purer sound quality.

Overall, the Integra DTR-5.5 represents a perfect blend of power, connectivity, and advanced technology, making it an excellent choice for anyone looking to elevate their home audio experience. With its comprehensive feature set, it stands out in the competitive landscape of home theater receivers, ensuring that every listening session is truly enjoyable.