Integra DTR-5.5 instruction manual Front & Rear Panels

DTR-6.5,5.5_En.book Page 9 Wednesday, July 28, 2004 9:07 AM

Front & Rear Panels—Continued

For detailed information, see the pages in parentheses.

AStandby/On button (38)

This button is used to set the AV receiver to On or Standby. For models with a POWER switch, this button has no effect unless the POWER switch is set to ON.

BStandby indicator (38)

This indicator lights up when the AV receiver is in Standby mode, and it flashes while a signal is being received from the remote controller.

CZone 2 indicator (77)

This indicator lights up when Zone 2 is selected.

DRemote-control sensor (13)

This sensor receives control signals from the remote controller.

ERec Out button (64)

This button is used to select the input source to be recorded.

FZone 2 button (77)

This button is used to select the input source for Zone 2.

GLevel button (77)

This button is used to set the volume for Zone 2.

HTone button (78)

This button is used to adjust the bass and treble for Zone 2.

I Controller [ ] [ ] buttons (64, 77, 78)

These buttons are used to select the input source to be recorded via the REC OUTs, to select the input source for Zone 2, and to set the volume, bass, and treble for Zone 2.

JStereo button (58)

This button is used to select the Stereo listening mode.

K Listening Mode [ ] [ ] buttons (58)

These buttons are used to select the listening modes.

LDisplay button (55)

This button is used to display various information about the currently selected input source.

MDisplay

See “Display” on page 10.

NMemory button (57)

RArrow/Tuning/Preset & Enter buttons (42)

When the AM or FM input source is selected, the

Tuning [ ] [	] buttons are used to tune the tuner,
and the Preset [	] [ ] buttons are used to select

radio presets (see page 57). When the onscreen setup menus are used, they work as arrow buttons and are used to select and set items. The Enter but- ton is also used with the onscreen setup menus.

SReturn button

This button is used to return to the previously dis- played onscreen setup menu.

TMaster Volume control (53)

This control is used to adjust the volume of the AV receiver to MIN, 1 through 99, or MAX

UPure Audio indicator (58)

This indicator lights up when the Pure Audio listen- ing mode is selected.

VPhones jack (54)

This 1/4-inch phone jack is for connecting a stan- dard pair of stereo headphones for private listening.

WSetup Mic (39)

The included speaker setup microphone is con- nected here for automatic speaker setup.

XTone, [–] & [+] buttons (78)

These buttons are used to adjust the bass and treble.

YInput selector buttons (53)

These buttons are used to select from the following input sources: Multi CH, DVD, VIDEO 1, VIDEO 2, VIDEO 3, VIDEO 4, TAPE, TUNER, CD, or PHONO (DTR-6.5 only).

The [Multi CH] button selects the DVD analog mul- tichannel input.

ZVideo 4 Input (33, 65)

This input can be used to connect a camcorder, games console, and so on. There are jacks for opti- cal digital audio, S-Video, composite video, and analog audio.

This button is used when storing or deleting radio presets.

OTuning Mode button (56)

This button is used to select the Auto or Manual tun- ing mode.

PDimmer button (54)

This button is used to adjust the display brightness.

QSetup button (42)

This button is used to access the onscreen setup menus that appear on the connected TV.

9