Integra DTR-5.5 instruction manual Crossover

Page 47

DTR-6.5,5.5_En.book Page 47 Wednesday, July 28, 2004 9:07 AM

First Time Setup—Continued

6

Use the Up and Down [ ]/[

]

 

buttons to select “c. Center,” and

 

then use the Left and Right [

]/

 

Enter

 

[ ] buttons to select:

Small: Select if the center speaker is small.

Large: Select if the center speaker is large.

None: Select if no center speaker is connected.

Note:

•If the Front setting in step 5 is set to Small, the Large option cannot be selected.

7

Use the Up and Down [ ]/[ ]

 

buttons to select “d. Surround,”

9

Use the Up and Down [ ]/[ ]

 

buttons to select “f. SurrBack

ch,” and then use the Left and

Enter

Right [ ]/[ ] buttons to select:

 

1ch: Select if one surround back

speaker is connected.

2ch: Select if two (left and right) surround back speakers are connected.

Continue with step 10 in the right col- umn.

Crossover

and then use the Left and Right

Enter

[]/[ ] buttons to select:

Small: Select if the surround left and right speakers are small.

Large: Select if the surround left and right speakers are large.

None: Select if no surround left and right speakers are connected.

Note:

•If the Front setting in step 5 is set to Small, the Large option cannot be selected.

8

Use the Up and Down [ ]/[ ]

 

buttons to select “e. Surround

Back,” and then use the Left and

Enter

Right []/[ ] buttons to select:

Small: Select if the surround back left and right speakers are small.

Large: Select if the surround back

speakers are large.

None: Select if no surround back speakers are connected.

Notes:

•If the Surround setting in step 7 is set to None, this setting cannot be selected.

•If the Surround setting in step 7 is set to Small, this setting cannot be set to Large.

10

Enter

Use the Up and Down []/[ ] buttons to select “g. Crossover,” and then use the Left and Right []/[ ] buttons to select a crossover frequency.

Choose a crossover frequency suitable for your setup. If you’re using a sub- woofer, choose a crossover frequency based on the diameter of your front speakers. If you’re not using a sub- woofer, use the diameter of any speaker that you specified as Small.

For the DTR-6.5, if you’re using THX- certified speakers, select 80Hz (THX).

Speaker cone

Crossover

diameter

frequency

 

 

Over 12 in.

40Hz*

(30 cm)

 

 

 

8 to 12 in.

60Hz

(20–30 cm)

 

 

 

6-1/2 to 8 in.

80Hz (THX)

(16–20 cm)

 

 

 

5-1/4 to 6-1/2 in.

100Hz

(13–16 cm)

 

 

 

3-1/2 to 5-1/4 in.

120Hz

(9–13 cm)

 

 

 

Under 3-1/2 in.

150Hz

(9 cm)

 

 

 

*DTR-6.5 only.

Continue with step 11 on the next page.

Notes:

•If the crossover frequency is set to a low value, and the program material doesn’t contain any sounds below that frequency, the subwoofer will not output much sound.

47

Page 46 Page 48
Image 47
Page 46 Page 48
Contents DTR-6.5/5.5 Avis Important Safety InstructionsFCC Information for User PrecautionsPower For models having a power cord with a polarized plugIf in any doubt, consult a qualified electrician Supplied AccessoriesPrecautions Make sure you have the following accessoriesDTR-5.5 FeaturesDTR-6.5/5.5 DTR-6.5Table of Contents Table of Contents DTR-5.5 Front & Rear PanelsFront Panel DTR-6.5Front & Rear Panels Rear Panel DisplayIR IN/OUT Component Video in 1, 2, 3 28, 30RS232 12V Trigger OUT A/B/C 73Phono in DTR-6.5 only Optical Digital 27, 28, 30, 32, 34Coaxial Digital 27, 28, 30, 32, 34 Grounding screw DTR-6.5 onlyUsing the Remote Controller Remote ControllerInstalling the Batteries RC-585M Remote ControllerReceiver Mode Remote indicatorOn button Remote Mode buttonsListening mode buttons 58 Surrond button Standby buttonDVD Mode CD Mode Pause button MD/CDR ModePlay button Previous & Next / buttonsReverse Play button Tape ModeFR & FF Buttons Stop buttonEnjoying Home Theater About Home TheaterAV Connection Color Coding Connecting the AV receiverAbout AV Connections Optical Digital JacksConnecting Your Speakers Connecting the AV receiverStrip about 5/8 15 mm Speaker Connection PrecautionsConnecting the Speaker Cables Attach the FM antenna, as shown American Model Connecting AntennaConnecting the Indoor FM Antenna Connecting the AM Loop AntennaUsing a TV/FM Antenna Splitter Connecting an Outdoor FM AntennaConnecting an Outdoor AM Antenna Audio Connection Formats Connecting Both Audio & VideoWhich Connections Should I Use? Video Connection FormatsAudio Connections Connecting Your TV or ProjectorMonitor Out DVD player Connecting a DVD PlayerVideo Connections Your TV must also be connected via component videoUsing a Multichannel Connection Connecting a D-VHS VCR for Playback Connecting a VCR for PlaybackTV or VCR, etc Connecting a VCR for RecordingPlayback from the Recording VCR VCR recordingSatellite, cable, set-top box, LD player, etc Using Optical or Coaxial ConnectionsPRSatellite, cable, set-top box, LD player, etc Camcorder Games console, etc Connecting a Camcorder, Games Console, etcUsing Analog Connections Using S-Video CD player Connecting a CD Player Connecting a Cassette RecorderConnecting a DAT, CD, or MD Recorder Analog ConnectionsDigital source DAT, CD, MD player Using Optical or Coaxial Connections playback onlyDigital Recording For the DTR-5.5 Connecting a TurntableFor the DTR-6.5 Is for connecting more -compatible components Connecting a Power Amplifier DTR-6.5 onlyConnecting Components When you start playback on an AV component conTurning On the AV receiver Connecting the Power Cords of Other ComponentsConnecting the Supplied Power Cord Connecting the RS232 PortAutomatic Speaker Setup First Time SetupFirst Time Setup Submenus About the Onscreen Setup MenusMain menus Digital Input Initial SetupTor, and then use the Left Component Video SetupMain menu appears onscreen Buttons to select an input selecAnce Minimum, and then use Press the Receiver button fol- lowed by the Setup buttonMinimum Speaker Impedance not American models Buttons to select b. Sp ImpedThen use the Left and Right TV Format Setup not American modelsHere you can specify the TV format used in your area Buttons to select c. TV FormatButtons to select a. Subwoofer Speaker SetupSpeaker Setup menu appears Buttons to select 2. SpeakerCrossover Tance, and then press Enter DefaultDouble Bass Speaker DistanceRepeat for all speakers Speaker Distance menu appearsButtons to specify the dis- tance Subwoofer 0dB Speaker Level CalibrationEqualizer Setting Repeat this step to select TAPE, MD, or CDR Changing the TAPE/MD/CDR DisplayStart playback on the source component Only the RC-585M remote controller has a Phono buttonBasic Operation Selecting the Input SourceBasic Operation Setting the Display BrightnessUsing the Sleep Timer Using HeadphonesInterpreting Surround Channel Values Displaying Source InformationYou can display various information about the current Input source as followsUse the Tuner input selector Using the TunerTuning into Radio Stations Listening to the RadioDisplaying Radio Information Presetting Radio StationsSelecting Preset Stations Deleting PresetsTHX button DTR-6.5 only Selecting with the Remote ControllerSelecting on the AV receiver Surrond buttonMultich About the Listening Modes Onkyo Original DSP Modes Advanced Operation Using the Re-EQ FunctionUsing the Late Night Function Dolby Digital only Using the CinemaFILTER DTR-5.5 onlyAdvanced Operation Adjusting Individual Speaker LevelsRecording Audio RecordingRecording Separate AV Sources AV RecordingDolby Digital Advanced SetupDecoder Setup Analog/PCMMultiplex Advanced SetupDTS D.F chSettings are explained below Audio Adjust FunctionsAudio Adjust menu appears PLIIx/Neo6 MonoAssigning Listening Modes to Input Sources Theater-DimensionalPreference menu appears Setting PreferencesUse the Up and Down Buttons to select the signal for This section explains the items on the Preference menuRemote Setup IntelliVolumeVolume Setup OSD SetupDigital Format Changing the Remote Controller’s ID6-7., 6-8 V Trigger Setup Zone Using Only Speakers in ZoneUsing a Receiver/Integrated Amp in Zone Buttons to select 3. Hardware Buttons to select a. PoweredHardware Setup menu appears Zone 2, and use the LeftZone 2 OUT L/R jacks can also be used as pre Outs Hardware Setup menu appearsUsing Zone Using a Multiroom Kit with Zone Using the Remote Control in ZoneUsing the 12V Trigger Adjusting the Bass & Treble for Zone2Controlling Out-of-range Components Using a Multiroom Kit with a CabinetCodes for Integra DVD Players Entering Remote Control CodesSetting the MD/CDR Button to CDR Controlling Other ComponentsControlling Other Components Resetting Remote Mode ButtonsResetting the Remote Controller SAT satellite receiver Remote Control CodesDVD DVD player ABC CBL cable receiverDTR-6.5,5.5En.book Page 84 Wednesday, July 28, 2004 907 AM DTR-6.5,5.5En.book Page 85 Wednesday, July 28, 2004 907 AM Controlling a Cable Receiver Controlling a TVButtons Controlling a VCR Controlling a Satellite ReceiverRec NumberLearning Commands from Another Remote Controller Running Macros Using MacrosMaking Macros Troubleshooting Troubleshooting Zone 2 has turned off? Remote controller doesn’t work?Can’t control other components? Can’t record?Display doesn’t work? Sound changes when I connect my head- phones?Speaker volume cannot be set as required? Speaker distance cannot be set as required?Video Section Specifications DTR-6.5Amplifier Section GeneralSpecifications DTR-5.5 3 4 3 8 2

DTR-5.5 specifications

The Integra DTR-5.5 is a prominent model in the world of home theater receivers, combining cutting-edge technology and user-friendly features to deliver an exceptional audio-visual experience. Known for its power and versatility, the DTR-5.5 successfully caters to both casual listeners and home cinema enthusiasts.

At the heart of the Integra DTR-5.5 is its high-performance amplification system, delivering 85 watts per channel across seven channels. This robust power output allows the receiver to easily drive demanding speaker setups and fill large rooms with rich, vibrant sound. The incorporation of advanced technologies like Dolby Atmos and DTS:X enhances the audio experience by providing immersive surround sound. These formats allow for object-based audio, creating a three-dimensional sound environment that makes movie watching or music listening feel truly captivating.

One of the standout characteristics of the DTR-5.5 is its extensive connectivity options. The receiver features multiple HDMI inputs, including 4K and HDR support, ensuring compatibility with the latest video sources and display technologies. It also includes digital and analog audio inputs, as well as Zone 2 outputs, making it suitable for multi-room audio setups. The built-in Wi-Fi and Bluetooth capabilities enable easy streaming from various devices, catering to modern consumer needs.

The user interface is designed with convenience in mind. The receiver comes equipped with an intuitive on-screen display, allowing users to effortlessly navigate settings and configurations. The Audyssey MultEQ room calibration technology optimizes speaker placement and acoustic performance, ensuring that users achieve optimal sound quality tailored to their specific room conditions.

In terms of aesthetics, the Integra DTR-5.5 is sleek and modern, fitting seamlessly into any home theater setup. Its solid construction not only enhances durability but also helps reduce resonance and interference, resulting in purer sound quality.

Overall, the Integra DTR-5.5 represents a perfect blend of power, connectivity, and advanced technology, making it an excellent choice for anyone looking to elevate their home audio experience. With its comprehensive feature set, it stands out in the competitive landscape of home theater receivers, ensuring that every listening session is truly enjoyable.
Top Page Image Contents