Goldstar LS242CE owner manual Auto operation Optional, During Auto Operation

Page 15

Auto operation (Optional)

1	Press the Start/Stop button.
	The unit will respond with

a beep.

Operating Instruction

ENGLISH

2	Open the door of the remote controller. To select Auto
	Operation, press the operation mode selection button.

Each time the button is pressed, the operation mode is shifted in the direction of the arrow.

Cooling	Auto	Healthy	Heating
		Dehumidification	(Heat pump model only)

ON

3	The temperature and fan speed are automatically set by the
	electronic controls based on the actual room temperature. If

you want to change the set temperature, press the Room Temperature Setting buttons. The cooler or warmer you feel, the more times (up to two times) you should press the button. The set temperature will be changed automatically.

To raise the temperature

To lower the temperature

During Auto Operation

❏You cannot control the indoor fan speed. It has already been set by the Fuzzy rule.

❏If the system is not operating as desired, manually switch to another mode. The system will not automatically switch from the cooling mode to the heating mode, or from heating mode to cooling mode, it must be done by manually resetting.

❏During Auto Operation, pressing the CHAOS swing button makes the horizontal louvers swing up and down automatically. If you want to stop auto-swing, press the CHAOS swing button again.

Owner’s Manual 15

Image 15

Contents Room Air Conditioner Table of Contents There is risk of electric shock Safety PrecautionsBe sure not to do Be sure to follow the instruction There is risk of fire or electric shockExplosion, or injury Damage to the product Edges Could cause personal injury Personal injuryShock There is risk of electrical shock There is risk of fire or product failureOxygen deficiency could occur There is risk of explosion or fireTo avoid vibration or water leakage It may cause a problem for your neighborsThere is risk of fire or electrical shock Bad connection may cause water leakageThere is risk of personal injury Avoid personal injuryThis could damage your health ProductBe careful and avoid personal injury There is risk of fire or explosionThey may burn or explode Usage ServicePrior To Operation Preparing For OperationIndoor Symbols Used In This ManualFeatures IntroductionElectrical Safety Operating Instruction Controls Remote Control OperationsGentle Breeze by the Chaos logic Cooling operationDuring Auto Operation Auto operation OptionalDuring Auto Changeover Operation Auto changeover operationOptionalFan speed mode is shifted Healthy dehumidification operationDuring Healthy Dehumidification Operation Heating operation Heat pump model only Close the door of the remote controllerTemperature can be set within a range Remote controller still closed. You canJet cool operation NEO Plasma Air Purifying Operation only NEO Plasma purification operationOptionalButton is pressed again 2nd F operationDelay start/Pre-set stop Additional FeaturesSleep mode Setting the timeVertical Airflow Direction Control Adjust the left/right airflow direction by hand22C71.6F 23C73.4F 24C75.2F Auto clean OptionalForced operation Test operationHelpful information To disable functionTo enable function Auto restartIndoor Unit Maintenance And ServiceAir conditioner is operating normally when Outdoor UnitAir conditioner does not cool as it should TroubleshootingAir conditioner may be operating abnormally when Air conditioner does not startNo A20434H