Goldstar LS242CE Additional Features, Sleep mode, Setting the time, Delay start/Pre-set stop

Page 22

Operating Instruction

Additional Features

Sleep mode

1.Press the Sleep Mode Auto button to set the time you want the unit to stop automatically.

2.The Timer is programmed in one-hour increments by pressing the Sleep Mode Auto button 1 to 7 times. The sleep mode is available for 1 to 7 times. To alter the time period in steps of 1 hour, press the Sleep Mode Button while aiming at air conditioner.

3.Make sure the Sleep Mode Auto LED lights up .

To cancel the Sleep Mode, press the sleep Mode Auto button several times until the star( ) disappears from the operation display.

NOTICE

The Sleep Mode will be operated at slow fan speed (cooling) or medium fan speed (heat pump only) for a comfortable sleep.

In cooling mode or healthy dehumidification mode:

The setting temperature will automatically rise by 1°C(2°F) over the next 30 minutes and by 2°C(4°F) in 1 hour for a comfortable sleep.

Setting the time

1.Time can be set only when you press the Reset button. When you replace the batteries, you should press the reset buttons to reset the time. Press the Start/Stop button.

2.Press 2nd F button and check if 2nd F icon is on.

3.Press the Time Setting buttons until the desired time is set.

CANCEL

4.Press the Timer SET button.

SET

NOTICE

Check the indicator for A.M. or P.M.

Delay start/Pre-set stop

1.Make sure the time is set correctly on the display of the remote controller.

2.Press 2nd F button.

3.Press the ON/OFF Timer buttons to turn Timer on or off. ONOFF

4.Press the Time Setting buttons until the desired time is set.

5.To set the selected time, press the Timer setting button aiming the remote controller at the signal receptor.

To cancel the timer setting

Check if 2nd F icon is off.CANCEL Press the Timer Cancel button aiming the remote controller at the signal receptor.

SET

(The timer lamp on the air conditioner and the display will go out.)

CANCEL

SET

NOTICE

Select one of the following four types of operation.

with the unit running

 

Delay OFF Timer

Delay ON Timer

Delay OFF and ON Timer Delay ON and OFF Timer

22Room Air Conditioner

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Room Air Conditioner Table of Contents There is risk of fire or electric shock Safety PrecautionsBe sure not to do Be sure to follow the instruction There is risk of electric shockCould cause personal injury Personal injury Explosion, or injury Damage to the product EdgesShock There is risk of explosion or fire There is risk of fire or product failureOxygen deficiency could occur There is risk of electrical shockBad connection may cause water leakage It may cause a problem for your neighborsThere is risk of fire or electrical shock To avoid vibration or water leakageProduct Avoid personal injuryThis could damage your health There is risk of personal injuryThere is risk of fire or explosion Be careful and avoid personal injuryThey may burn or explode Preparing For Operation ServicePrior To Operation UsageIntroduction Symbols Used In This ManualFeatures IndoorElectrical Safety Operating Instruction Remote Control Operations ControlsCooling operation Gentle Breeze by the Chaos logicAuto operation Optional During Auto OperationAuto changeover operationOptional During Auto Changeover OperationHealthy dehumidification operation Fan speed mode is shiftedDuring Healthy Dehumidification Operation Remote controller still closed. You can Close the door of the remote controllerTemperature can be set within a range Heating operation Heat pump model onlyJet cool operation NEO Plasma purification operationOptional NEO Plasma Air Purifying Operation only2nd F operation Button is pressed againSetting the time Additional FeaturesSleep mode Delay start/Pre-set stopAdjust the left/right airflow direction by hand Vertical Airflow Direction ControlTest operation Auto clean OptionalForced operation 22C71.6F 23C73.4F 24C75.2FAuto restart To disable functionTo enable function Helpful informationMaintenance And Service Indoor UnitOutdoor Unit Air conditioner is operating normally whenAir conditioner does not start TroubleshootingAir conditioner may be operating abnormally when Air conditioner does not cool as it shouldNo A20434H
Top Page Image Contents