Goldstar LS242CE owner manual NEO Plasma purification operationOptional

Page 20

Operating Instruction

NEO PLASMA purification operation(Optional)

1	Press the Start/Stop button.
	The unit will respond with a

beep.

2	Open the door of the remote
	controller. Press the PLASMA

button.

Operation will start when the button is pressed and stop when the button is pressed again.

Set the fan speed again with the door of the remote

3 controller closed. You can select the fan speed in four steps-low, medium, high or CHAOS. Each time the button is pressed, the fan

speed mode is shifted.

❈ Air purifying operation (NEO PLASMA) can be with cooling, Heating or any other operations.

NEO PLASMA Air Purifying Operation only

If you press the only PLASMA button, only PLASMA purification function operates. Then, fan speed is low. You can select the fan speed in four steps-low, medium, high or

CHAOS.

Each time the Indoor Fan Speed Selector button is pressed, the fan speed mode is shifted.

20Room Air Conditioner

Image 20

Contents Room Air Conditioner Table of Contents Safety Precautions Be sure not to do Be sure to follow the instructionThere is risk of fire or electric shock There is risk of electric shockShock Explosion, or injury Damage to the product EdgesCould cause personal injury Personal injury There is risk of fire or product failure Oxygen deficiency could occurThere is risk of explosion or fire There is risk of electrical shockIt may cause a problem for your neighbors There is risk of fire or electrical shockBad connection may cause water leakage To avoid vibration or water leakageAvoid personal injury This could damage your healthProduct There is risk of personal injuryThey may burn or explode Be careful and avoid personal injuryThere is risk of fire or explosion Service Prior To OperationPreparing For Operation UsageSymbols Used In This Manual FeaturesIntroduction IndoorElectrical Safety Operating Instruction Remote Control Operations ControlsCooling operation Gentle Breeze by the Chaos logicAuto operation Optional During Auto OperationAuto changeover operationOptional During Auto Changeover OperationDuring Healthy Dehumidification Operation Fan speed mode is shiftedHealthy dehumidification operation Close the door of the remote controller Temperature can be set within a rangeRemote controller still closed. You can Heating operation Heat pump model onlyJet cool operation NEO Plasma purification operationOptional NEO Plasma Air Purifying Operation only2nd F operation Button is pressed againAdditional Features Sleep modeSetting the time Delay start/Pre-set stopAdjust the left/right airflow direction by hand Vertical Airflow Direction ControlAuto clean Optional Forced operationTest operation 22C71.6F 23C73.4F 24C75.2FTo disable function To enable functionAuto restart Helpful informationMaintenance And Service Indoor UnitOutdoor Unit Air conditioner is operating normally whenTroubleshooting Air conditioner may be operating abnormally whenAir conditioner does not start Air conditioner does not cool as it shouldNo A20434H