Goldstar LS242CE owner manual Auto changeover operationOptional, During Auto Changeover Operation

Page 16

Operating Instruction

Auto changeover operation(Optional)

1	Press the Start/Stop button.
	The unit will respond with

a beep.

2	Open the door of the remote controller. To select Auto Changeover
	Operation, press the Operation Mode Selection button.

Each time the button is pressed, the operation mode is shifted in the direction of the arrow.

Cooling	Auto	Healthy	Heating
	Changeover	Dehumidification	(Heat pump model only)

Close the door of the remote controller. Set the temperature

3 lower than the room temperature. The temperature can be set within a range of 18°C~30°C(64°F~86°F) at intervals of 1°C(2°F).

To raise the temperature

ON

	To lower the temperature
4	Set the fan speed again with the door
4	of the remote controller still closed.

You can select the fan speed in four steps-low, medium, high and CHAOS. Each time the button is pressed, the fan speed mode is shifted.

During Auto Changeover Operation

The air conditioner changes the operation mode automatically to keep indoor temperature. When room temperature varies over ±2°C from the set temperature, air conditioner keeps the room temperature within ±2°C of the set temperature by auto changeover mode.

16Room Air Conditioner

Image 16

Contents Room Air Conditioner Table of Contents Safety Precautions Be sure not to do Be sure to follow the instructionThere is risk of fire or electric shock There is risk of electric shockCould cause personal injury Personal injury Explosion, or injury Damage to the product EdgesShock There is risk of fire or product failure Oxygen deficiency could occurThere is risk of explosion or fire There is risk of electrical shockIt may cause a problem for your neighbors There is risk of fire or electrical shockBad connection may cause water leakage To avoid vibration or water leakageAvoid personal injury This could damage your healthProduct There is risk of personal injuryThere is risk of fire or explosion Be careful and avoid personal injuryThey may burn or explode Service Prior To OperationPreparing For Operation UsageSymbols Used In This Manual FeaturesIntroduction IndoorElectrical Safety Operating Instruction Remote Control Operations ControlsCooling operation Gentle Breeze by the Chaos logicAuto operation Optional During Auto OperationAuto changeover operationOptional During Auto Changeover OperationHealthy dehumidification operation Fan speed mode is shiftedDuring Healthy Dehumidification Operation Close the door of the remote controller Temperature can be set within a rangeRemote controller still closed. You can Heating operation Heat pump model onlyJet cool operation NEO Plasma purification operationOptional NEO Plasma Air Purifying Operation only2nd F operation Button is pressed againAdditional Features Sleep modeSetting the time Delay start/Pre-set stopAdjust the left/right airflow direction by hand Vertical Airflow Direction ControlAuto clean Optional Forced operationTest operation 22C71.6F 23C73.4F 24C75.2FTo disable function To enable functionAuto restart Helpful informationMaintenance And Service Indoor UnitOutdoor Unit Air conditioner is operating normally whenTroubleshooting Air conditioner may be operating abnormally whenAir conditioner does not start Air conditioner does not cool as it shouldNo A20434H