Goldstar LS242CE owner manual Vertical Airflow Direction Control

Page 23

Operating Instruction

Vertical Airflow Direction Control

The up/down airflow (Vertical Airflow) can be adjusted by using the remote control.

1. Press the Start/Stop button to start the unit.

2.Open the door on the remote control.

Press Chaos Swing button and the louvers will swing up and down. Press the Chaos Swing button again to set the vertical louver at the desired airflow direction.

Air Circulation Mode

NOTICE

If you press the CHAOS swing button, the vertical airflow direction is changed automatically based on the CHAOS algorithm to distribute the air in the room evenly and at the same time to make the human body feel most comfortable, as if enjoying a natural breeze.

Always use the remote control to adjust the up/down airflow direction. Manually moving the vertical airflow direction louver by hand could damage the air conditioner.

When the unit is shut off, the up/down airflow direction louver will close the air outlet vent of the system.

To adjust left/right(Horizontal Airflow) direction

Ensure unit is turned off before adjusting the horizontal airflow direction control. Carefully open vertical louver to

allow access to the horizontal airflow direction.

Adjust the left/right airflow direction by hand.

ENGLISH

Circulates the room air without cooling or heating.

1.Press the Start/Stop button. the unit will respond with a beep.

2.Open the door on the remote control. Press the Air Circulation button. Close the door on the remote control. Now each time that you press the Indoor Fan Speed Selector, the fan speed is shifted from low to CHAOS and back to low again.

CHAOS Air

Fan speed is on low. Fan speed is on medium. Fan speed is on high.

NOTICE

CHAOS Air economizes power consumption and prevents overcooling. The fan speed is automatically changed from high to low or vice versa, depending on the ambient temperature.

Owner’s Manual 23

Image 23
Contents Room Air Conditioner Table of Contents There is risk of electric shock Safety PrecautionsBe sure not to do Be sure to follow the instruction There is risk of fire or electric shockShock Explosion, or injury Damage to the product EdgesCould cause personal injury Personal injury There is risk of electrical shock There is risk of fire or product failureOxygen deficiency could occur There is risk of explosion or fireTo avoid vibration or water leakage It may cause a problem for your neighborsThere is risk of fire or electrical shock Bad connection may cause water leakageThere is risk of personal injury Avoid personal injuryThis could damage your health ProductThey may burn or explode Be careful and avoid personal injuryThere is risk of fire or explosion Usage ServicePrior To Operation Preparing For OperationIndoor Symbols Used In This ManualFeatures IntroductionElectrical Safety Operating Instruction Controls Remote Control OperationsGentle Breeze by the Chaos logic Cooling operationDuring Auto Operation Auto operation OptionalDuring Auto Changeover Operation Auto changeover operationOptionalDuring Healthy Dehumidification Operation Fan speed mode is shiftedHealthy dehumidification operation Heating operation Heat pump model only Close the door of the remote controllerTemperature can be set within a range Remote controller still closed. You canJet cool operation NEO Plasma Air Purifying Operation only NEO Plasma purification operationOptionalButton is pressed again 2nd F operationDelay start/Pre-set stop Additional FeaturesSleep mode Setting the timeVertical Airflow Direction Control Adjust the left/right airflow direction by hand22C71.6F 23C73.4F 24C75.2F Auto clean OptionalForced operation Test operationHelpful information To disable functionTo enable function Auto restartIndoor Unit Maintenance And ServiceAir conditioner is operating normally when Outdoor UnitAir conditioner does not cool as it should TroubleshootingAir conditioner may be operating abnormally when Air conditioner does not startNo A20434H