Integra DTR-8.2 instruction manual Recording a source

Page 58

Recording a source

Recording the video from one source and the audio from another

You can add the sound from one source to the video of another source to make your own video recordings.

Below is an example of recording the sound from a compact disc player connected to CD IN and the video from a video camera connected to VIDEO 5 IN to video cassette tape in a video cassette recorder connected to the VIDEO 1 OUT jack.

1.Press the CD input source button.

2.Set “VIDEO 5” for the Video setting in the Video Setup sub-menu of the Setup menu: Input Setup → Video Setup → Video.

3.Insert a CD in the CD player and insert a tape in the video camera connected to the VIDEO 5 IN.

4.Insert a video tape for recording in the video cassette recorder connected to VIDEO 1 OUT.

5.Press the Rec Out button repeatedly until “Rec Sel:SOURCE” appears in the front display.

Now “CD” has been selected as the audio input source and “VIDEO 5” as the video input source.

6.Start recording on the video cassette recorder and start playing at the CD player and video camera as desired.

Notes:

•If you change the input source during recording, you will record the audio signals from the newly selected input source and the video signals assigned to that input source.

•You cannot record the surround effects.

58

Page 57 Page 59
Image 58
Page 57 Page 59
Contents DTR-8.2 Important Safeguards AvisPrecautions Contents Contents Features Supplied accessoriesUsing the remote controller Before using this unitInsert batteries Front door Front panel facilitiesFront panel Front panel displayFront panel facilities Enter button Tuning / buttonsPreset / buttons Return buttonRemote controller Remote controller Zone Improper connection Inserted completely Rear panel facilitiesDigital INPUT/OUTPUT coaxial and optical Coaxial cable3 4 Power amplifierRear panel facilities RCA type12V Trigger A/B/ZONE 2 terminal Power on/ready functionPower off function Direct change functionVideo jack DecoderConnecting a compact disc player CD Connecting your audio componentsConnecting a turntable PH ConnectionsConnecting a DVD player DVD Connecting your video componentsFlow of the video signals is as follows Signal flow Audio connection cable Left white Right redConnecting a video cassette recorder Video Connecting video camera, etc. Video Connecting a television monitor or projectorMinimum speaker configuration for surround sound playback Connecting speakersIdeal speaker configuration Speaker placementConnecting the speaker cable Connecting speakersConnecting speakers Connecting a subwooferWhen using the Zone 2 OUT terminals Connecting the remote zone Zone 2 speakersWhen using the Surr BACK/ZONE 2 Speakers terminals When using the Surr BACK/ZONE 2 PRE OUT terminalsFrom connecting block Other componentConnecting the included antennas Connecting antennasConnecting the AM antenna cable Assembling the AM loop antennaConnecting an AM outdoor antenna Connecting antennasConnecting an FM outdoor antenna Directional linkageConnecting the power Basic Menu Setup menusAdvanced Menu When using the buttons on the front panel Setup menusNavigating through the Setup menu Press the Setup buttonIR in Setup sub-menu Hardware SetupHardware Setup menu Speaker Impedance sub-menuSpeaker Setup menu Speaker SetupSpeaker Config sub-menu Speaker Setup Speaker Distance sub-menuLeft Level Calibration sub-menuCalibrating the speaker levels RightBass Peak Level Limiter Bass Peak Level Bass Peak Level Manager* sub-menuPeak Level Digital Setup sub-menu Input SetupInput Setup menu Initial settings for each input sourceDigital Input Input SetupMultichannel Setup sub-menu Digital FormatVideo Video Setup sub-menuLast Valid enables the source last selected The source that Component VideoCharacter Input sub-menu Intelli Volume sub-menuIntelli Volume Character DisplayListening Mode Preset sub-menu Relationship between input source and listening modeInput source signals Listening ModesTrigger Setup sub-menu Audio Adjust Audio Adjust Setup menuAudio Adjust Surr Mode D.F.2ch Surround SetupSurr Mode Analog/PCM Pro Logic II Music DimensionTHX Surround EX Dolby D THX SetupDecoder Front EffectPreference Volume Setup sub-menuPreference menu Preference Headphones Level Setup sub-menuOSD Setup sub-menu OSD Position sub-menuFM Mode Tuning into a radio stationListening to a stereo radio station FM mode Press either the AM or FM input Source button TuningErasing a preset radio station Presetting a radio stationSelecting a preset radio station Listening to Radio BroadcastsEnjoying music or videos with the DTR-8.2 Adjusting the bass and trebleListening with headphones Temporarily turning off the soundRemote controller only Changing the listening modeDirect Setup Pure Audio Enter Return Enjoying music or videos with the DTR-8.2Adjusting the brightness of the front display Switching the displayUsing the sleep time remote controller only Temporarily changing the speaker output levelsEnjoying the multichannel output Changing the audio modeUsing the tone control Direct/Pure AudioEntering names for input sources and tuner stations Setup Enter ReturnTo delete an entered name Adjusting the volume for the remote zone Playing music using the buttons on the DTR-8.2Selecting an input source using the remote controller Enjoying music in the remote zoneRec Out Recording a sourceStart recording at the recording component as desired Recording a source Insert batteries Operate your components Using the remote controllerQuick Start Touch the screen to startQuick reference ModesDirect-access buttons Intelligent Remote ControllerIntroduction Touchscreen buttons IntroductionLeft and Right buttons Which Buttons Can Be Programmed?AA batteries Charging the Remote ControllerOptional recharging dock Introduction Getting Started Activate the remote controllerDefine the Brand of Your Device Select Yes to define the brand of the device to operate Getting StartedDefining brands by selecting Tap NextSelect your brand from the list Select a code set from the listDefining brands by searching Tap SearchVia the Home menu Select a DeviceVia the Device menu Using touchscreen buttons Adjust the SettingsUsing the Left and Right button Using the direct-access buttonsSecond setup panel First setup panelThird setup panel Programming Buttons Getting the Maximum out of itIntroduction Working with ModesProgramming control panel buttons Programming direct-access and Left/Right ButtonsGetting the Maximum out of it Programming device itemsLabeling a menu item Labeling Buttons and Menu ItemsLabeling a button Edit the labelAdding devices Adding and Moving DevicesMoving menu items Tap the item you want to restore Delete and restoreRestore DeleteEditing macros Recording Macros and Setting TimersRecording macros Editing timers Setting timersOrganizing macros and timers into groups Switch to RF IR mode by using the Mode button Using the remote controller with Radio FrequencyChanging the remote controller’s RF IR Settings Tap RFChoosing Another Channel System requirements ChadEditWith ChadEdit you can Programming Problems TroubleshootingGeneral Problems Recharging ProblemsHow do I reset the Remote controller? Can I program a button to execute more than one command?How do I program source switching? How do I revert to the original configuration?Overview of Symbols Specifications Troubleshooting guide Video and Audio Troubleshooting guideIf one of the messages shown below appears Amplifier Section Tuner Section

DTR-8.2 specifications

The Integra DTR-8.2 is a high-performance A/V receiver that stands at the crossroads of functionality and sophistication, designed for the discerning audiophile and home theater enthusiast. This powerful receiver offers a robust suite of features and technologies that enhance the listening experience while seamlessly integrating into modern home entertainment setups.

One of the standout features of the DTR-8.2 is its advanced power amplification. With a 9.2 channel configuration, it delivers a potent output, ensuring that every movie, concert, or gaming session is filled with immersive sound. The receiver is equipped with high-current amplification and features a robust power supply, which works in tandem to deliver clear, dynamic audio even at high volumes.

In terms of audio processing, the DTR-8.2 supports Dolby Atmos and DTS:X, two cutting-edge technologies that create a three-dimensional sound environment. This immersive audio experience is further enhanced by its support for various high-resolution audio formats, allowing music lovers to enjoy studio-quality playback of their favorite tracks.

The receiver also features integrated network capabilities, with built-in Wi-Fi and Ethernet connectivity. This allows users to access a wide range of streaming services, including popular platforms like Spotify, Amazon Music, and Tidal. With Chromecast built-in, AirPlay 2, and DTS Play-Fi support, streaming high-quality audio from various devices has never been easier.

Another noteworthy characteristic of the DTR-8.2 is its comprehensive HDMI connectivity. It includes multiple HDMI inputs and outputs that support 4K/60Hz video, HDR10, Dolby Vision, and HDCP 2.2, making it compatible with the latest video formats and ensuring that users are future-proofed against evolving technology.

The Integra DTR-8.2 also incorporates room calibration technology, namely MCACC (Multi-Channel Acoustic Calibration System), which fine-tunes audio output to suit the specific acoustics of the listening space. This ensures that every listener receives an optimal sound experience, regardless of the room's layout.

In conclusion, the Integra DTR-8.2 is a multifaceted A/V receiver that combines cutting-edge audio and video technologies with user-friendly features. Its combination of power, versatility, and high-tech integrations makes it an ideal centerpiece for any home theater system, catering to those who seek both quality and performance in their audio-visual experiences.
Top Page Image Contents