Integra DTR-8.2 instruction manual Troubleshooting guide, Video and Audio

Page 87

Troubleshooting guide

VIDEO and AUDIO

Desired picture does not appear.

•Improper connection.

➞Check the connection again. Insert the plugs and connectors completely.

No OSD Menu display.

•Improper connection.

➞Check connections.

•OSD Menu is displayed when monitor is connected to VIDEO or S VIDEO of MONITOR OUT.

➞Confirm connections (see page 21).

No sound, or sound of the selected source is not heard.

•Input Setup menu settings are incorrect. ➞ Check settings (see page 36).

No picture appears on the TV screen (or monitor).

•TV (or monitor) is not set to receive the output signals from the receiver.

➞Set the TV (or monitor) to the receiver input.

•Video cable is not connected securely.

➞Check connections.

•You have connected to the COMPONENT VIDEO connectors but the DTR-8.2 is not set properly.

➞Check the Video Setup submenu of the Input Setup menu (page 19).

OTHER

LATE NIGHT function cannot be used.

•Playback source is not Dolby Digital encoded.

➞Check that the DOLBY DIGITAL indicator lights up on the display.

Re-EQ function cannot be used.

•Listening mode is set to Theater-Dimensional, or Direct/Pure Audio.

➞ See page 46.

Parameter cannot be set for Front Effect etc.

•Parameter may not be able to be set depending on the listening mode.

➞ See table on page 46.

Multichannel audio is not output.

•To listen to multichannel audio, “Yes” must be selected in the “Multichannel” in the Multichannel setup sub-menu of the Input Setup menu. Also, it is necessary to select Multichannel with the Audio Selector button.

➞Check that the component is connected to the MULTI CHANNEL INPUT port and check the Setup menu settings.

Components in remote zone (Zone 2) do not operate properly.

•Components are incorrectly connected.

➞Check connections.

•Objects are interfering with remote controller signals.

➞Move inferring objects away from path of remote controller signals.

If one of the messages shown below appears

“Not available with headphones use”

The operation is not allowed because headphones are plugged into the DTR-8.2.

“Not available with Multichannel use”

Cannot be used while the multichannel output is being used.

“Not available in this Sp Config”

Will not work with the current speaker configuration settings.

“Not available in Zone 2 mode”

The operation is not allowed because the Zone 2 mode is turned on.

“Only available with Dolby D”

No setting other than Dolby Digital can be set.

“Not available in this Listening mode”

Will not work with the current listening mode.

“Not available with this signal”

The listening mode cannot be selected with the current input source.

“Powered Zone 2 is not Activated”

Will not work with the Zone 2 output set to non-activated (Not Activated).

“Not available with Muting”

Will not work because the muting is activated.

“Zone 2 is not On”

Will not work because the Zone 2 has not been turned on.

Also refer to the respective instruction manuals of the compact disc player, DVD player, video cassette recorder, TV monitor, etc., that compose your entertainment system.

The DTR-8.2 contains an internal microcomputer that performs high-level operations. However, on extremely rare occasions, noise or interference from an external source or static electricity may cause faulty operation. If this occurs, unplug the power cord from the wall outlet, wait five or more seconds, and then plug it back in. This should correct the situation.

*To reset the surround mode and other settings to the factory default settings, hold down the Video 1 button with the DTR-8.2 turned on and then press the Standby/On button. “CLEAR” appears in the front display and the DTR-8.2 enters the standby state.

87

Page 86 Page 88
Image 87
Page 86 Page 88
Contents DTR-8.2 Avis Important SafeguardsPrecautions Contents Contents Supplied accessories FeaturesBefore using this unit Using the remote controllerInsert batteries Front panel display Front panel facilitiesFront panel Front doorFront panel facilities Return button Tuning / buttonsPreset / buttons Enter buttonRemote controller Remote controller Zone Coaxial cable Rear panel facilitiesDigital INPUT/OUTPUT coaxial and optical Improper connection Inserted completelyRCA type Power amplifierRear panel facilities 3 4Direct change function Power on/ready functionPower off function 12V Trigger A/B/ZONE 2 terminalDecoder Video jackConnections Connecting your audio componentsConnecting a turntable PH Connecting a compact disc player CDSignal flow Audio connection cable Left white Right red Connecting your video componentsFlow of the video signals is as follows Connecting a DVD player DVDConnecting a video cassette recorder Video Connecting a television monitor or projector Connecting video camera, etc. VideoSpeaker placement Connecting speakersIdeal speaker configuration Minimum speaker configuration for surround sound playbackConnecting a subwoofer Connecting speakersConnecting speakers Connecting the speaker cableWhen using the Surr BACK/ZONE 2 PRE OUT terminals Connecting the remote zone Zone 2 speakersWhen using the Surr BACK/ZONE 2 Speakers terminals When using the Zone 2 OUT terminalsOther component From connecting blockAssembling the AM loop antenna Connecting antennasConnecting the AM antenna cable Connecting the included antennasDirectional linkage Connecting antennasConnecting an FM outdoor antenna Connecting an AM outdoor antennaConnecting the power Setup menus Basic MenuAdvanced Menu Press the Setup button Setup menusNavigating through the Setup menu When using the buttons on the front panelSpeaker Impedance sub-menu Hardware SetupHardware Setup menu IR in Setup sub-menuSpeaker Setup Speaker Setup menuSpeaker Config sub-menu Speaker Distance sub-menu Speaker SetupRight Level Calibration sub-menuCalibrating the speaker levels LeftBass Peak Level Bass Peak Level Manager* sub-menu Bass Peak Level LimiterPeak Level Initial settings for each input source Input SetupInput Setup menu Digital Setup sub-menuDigital Format Input SetupMultichannel Setup sub-menu Digital InputComponent Video Video Setup sub-menuLast Valid enables the source last selected The source that VideoCharacter Display Intelli Volume sub-menuIntelli Volume Character Input sub-menuRelationship between input source and listening mode Listening Mode Preset sub-menuListening Modes Input source signalsTrigger Setup sub-menu Audio Adjust Setup menu Audio AdjustAudio Adjust Pro Logic II Music Dimension Surround SetupSurr Mode Analog/PCM Surr Mode D.F.2chFront Effect THX SetupDecoder THX Surround EX Dolby DVolume Setup sub-menu PreferencePreference menu OSD Position sub-menu Headphones Level Setup sub-menuOSD Setup sub-menu PreferencePress either the AM or FM input Source button Tuning Tuning into a radio stationListening to a stereo radio station FM mode FM ModeListening to Radio Broadcasts Presetting a radio stationSelecting a preset radio station Erasing a preset radio stationTemporarily turning off the sound Adjusting the bass and trebleListening with headphones Enjoying music or videos with the DTR-8.2Enjoying music or videos with the DTR-8.2 Changing the listening modeDirect Setup Pure Audio Enter Return Remote controller onlyTemporarily changing the speaker output levels Switching the displayUsing the sleep time remote controller only Adjusting the brightness of the front displayDirect/Pure Audio Changing the audio modeUsing the tone control Enjoying the multichannel outputSetup Enter Return Entering names for input sources and tuner stationsTo delete an entered name Enjoying music in the remote zone Playing music using the buttons on the DTR-8.2Selecting an input source using the remote controller Adjusting the volume for the remote zoneRecording a source Rec OutStart recording at the recording component as desired Recording a source Touch the screen to start Using the remote controllerQuick Start Insert batteries Operate your componentsModes Quick referenceIntelligent Remote Controller Direct-access buttonsIntroduction Which Buttons Can Be Programmed? IntroductionLeft and Right buttons Touchscreen buttonsCharging the Remote Controller AA batteriesOptional recharging dock Introduction Activate the remote controller Getting StartedDefine the Brand of Your Device Tap Next Getting StartedDefining brands by selecting Select Yes to define the brand of the device to operateSelect a code set from the list Select your brand from the listTap Search Defining brands by searchingSelect a Device Via the Home menuVia the Device menu Using the direct-access buttons Adjust the SettingsUsing the Left and Right button Using touchscreen buttonsFirst setup panel Second setup panelThird setup panel Working with Modes Getting the Maximum out of itIntroduction Programming ButtonsProgramming device items Programming direct-access and Left/Right ButtonsGetting the Maximum out of it Programming control panel buttonsEdit the label Labeling Buttons and Menu ItemsLabeling a button Labeling a menu itemAdding and Moving Devices Adding devicesMoving menu items Delete Delete and restoreRestore Tap the item you want to restoreRecording Macros and Setting Timers Editing macrosRecording macros Setting timers Editing timersOrganizing macros and timers into groups Tap RF Using the remote controller with Radio FrequencyChanging the remote controller’s RF IR Settings Switch to RF IR mode by using the Mode buttonChoosing Another Channel ChadEdit System requirementsWith ChadEdit you can Recharging Problems TroubleshootingGeneral Problems Programming ProblemsHow do I revert to the original configuration? Can I program a button to execute more than one command?How do I program source switching? How do I reset the Remote controller?Overview of Symbols Specifications Troubleshooting guide Troubleshooting guide Video and AudioIf one of the messages shown below appears Amplifier Section Tuner Section

DTR-8.2 specifications

The Integra DTR-8.2 is a high-performance A/V receiver that stands at the crossroads of functionality and sophistication, designed for the discerning audiophile and home theater enthusiast. This powerful receiver offers a robust suite of features and technologies that enhance the listening experience while seamlessly integrating into modern home entertainment setups.

One of the standout features of the DTR-8.2 is its advanced power amplification. With a 9.2 channel configuration, it delivers a potent output, ensuring that every movie, concert, or gaming session is filled with immersive sound. The receiver is equipped with high-current amplification and features a robust power supply, which works in tandem to deliver clear, dynamic audio even at high volumes.

In terms of audio processing, the DTR-8.2 supports Dolby Atmos and DTS:X, two cutting-edge technologies that create a three-dimensional sound environment. This immersive audio experience is further enhanced by its support for various high-resolution audio formats, allowing music lovers to enjoy studio-quality playback of their favorite tracks.

The receiver also features integrated network capabilities, with built-in Wi-Fi and Ethernet connectivity. This allows users to access a wide range of streaming services, including popular platforms like Spotify, Amazon Music, and Tidal. With Chromecast built-in, AirPlay 2, and DTS Play-Fi support, streaming high-quality audio from various devices has never been easier.

Another noteworthy characteristic of the DTR-8.2 is its comprehensive HDMI connectivity. It includes multiple HDMI inputs and outputs that support 4K/60Hz video, HDR10, Dolby Vision, and HDCP 2.2, making it compatible with the latest video formats and ensuring that users are future-proofed against evolving technology.

The Integra DTR-8.2 also incorporates room calibration technology, namely MCACC (Multi-Channel Acoustic Calibration System), which fine-tunes audio output to suit the specific acoustics of the listening space. This ensures that every listener receives an optimal sound experience, regardless of the room's layout.

In conclusion, the Integra DTR-8.2 is a multifaceted A/V receiver that combines cutting-edge audio and video technologies with user-friendly features. Its combination of power, versatility, and high-tech integrations makes it an ideal centerpiece for any home theater system, catering to those who seek both quality and performance in their audio-visual experiences.
Top Page Image Contents