Integra DTR-8.2 Setting timers, Editing timers, Organizing macros and timers into groups

Page 78

Getting the Maximum out of it

Setting timers

To activate a device at the time you set.

1.Tap the Macro menu button.

2.Open the macro menu and select a timer group.

3.Switch to Edit mode by using the Mode button.

Empty timer buttons appear in the timer control panel.

4.Tap the button you want to set a timer for.

The first timer control panel appears in which you can set the start time.

5.Enter the command the timer has to execute.

A timer can contain either a single IR command or a macro.

You can navigate to any control panel you want, just as you can in Use mode.

6.Tap the clock button and set the start time using the Left/Right buttons.

7.Tap one or more day buttons to select or deselect days for the timer.

You can choose to repeat the timer weekly.

8.Scroll down to display the second timer control panel in which you can set the stop time.

9.Enter the command the timer has to execute.

10.Tap the clock button and set the stop time using the Left/Right buttons.

11.Press the Left button to close the timer.

A confirmation screen appears, which allows you to save or cancel the timer.

12.Tap Save.

The timer is activated.

Note:

The timer only works when the remote controller’s sending eye is pointed towards the controlled device and no obstructions interfere the infrared signal.

Editing timers

You can edit any timer you have set.

1.Open the timer group that contains the timer.

2.Switch to Edit mode via the Mode button.

3.Tap the timer you want to edit.

The contents of the timer appear.

4.Edit the timer.

5.Press the Left button to close the timer.

A confirmation screen appears, which allows you to save or cancel the timer.

6.Tap Save.

The timer is edited.

Organizing macros and timers into groups

You can create as macro groups or timer groups up to 25 macros or timers in each group.

1.Open any macro or timer group.

2.Switch to Add mode by using the Mode button.

You can create a new group, copy an existing group, or restore a previous deleted group.

•Create a new group: You add a new group in which you can record new macros.

•Copy an existing group: You copy a group and its macros and use it for new macros.

•Restore a previously deleted group: You restore a deleted group and reuse the macros.

3.Tap Create Timer Group or Create Macro Group.

78

Page 77 Page 79
Image 78
Page 77 Page 79
Contents DTR-8.2 Important Safeguards AvisPrecautions Contents Contents Features Supplied accessoriesBefore using this unit Using the remote controllerInsert batteries Front door Front panel facilitiesFront panel Front panel displayFront panel facilities Enter button Tuning / buttonsPreset / buttons Return buttonRemote controller Remote controller Zone Improper connection Inserted completely Rear panel facilitiesDigital INPUT/OUTPUT coaxial and optical Coaxial cable3 4 Power amplifierRear panel facilities RCA type12V Trigger A/B/ZONE 2 terminal Power on/ready functionPower off function Direct change functionVideo jack DecoderConnecting a compact disc player CD Connecting your audio componentsConnecting a turntable PH ConnectionsConnecting a DVD player DVD Connecting your video componentsFlow of the video signals is as follows Signal flow Audio connection cable Left white Right redConnecting a video cassette recorder Video Connecting video camera, etc. Video Connecting a television monitor or projectorMinimum speaker configuration for surround sound playback Connecting speakersIdeal speaker configuration Speaker placementConnecting the speaker cable Connecting speakersConnecting speakers Connecting a subwooferWhen using the Zone 2 OUT terminals Connecting the remote zone Zone 2 speakersWhen using the Surr BACK/ZONE 2 Speakers terminals When using the Surr BACK/ZONE 2 PRE OUT terminalsFrom connecting block Other componentConnecting the included antennas Connecting antennasConnecting the AM antenna cable Assembling the AM loop antennaConnecting an AM outdoor antenna Connecting antennasConnecting an FM outdoor antenna Directional linkageConnecting the power Setup menus Basic MenuAdvanced Menu When using the buttons on the front panel Setup menusNavigating through the Setup menu Press the Setup buttonIR in Setup sub-menu Hardware SetupHardware Setup menu Speaker Impedance sub-menuSpeaker Setup Speaker Setup menuSpeaker Config sub-menu Speaker Setup Speaker Distance sub-menuLeft Level Calibration sub-menuCalibrating the speaker levels RightBass Peak Level Bass Peak Level Manager* sub-menu Bass Peak Level LimiterPeak Level Digital Setup sub-menu Input SetupInput Setup menu Initial settings for each input sourceDigital Input Input SetupMultichannel Setup sub-menu Digital FormatVideo Video Setup sub-menuLast Valid enables the source last selected The source that Component VideoCharacter Input sub-menu Intelli Volume sub-menuIntelli Volume Character DisplayListening Mode Preset sub-menu Relationship between input source and listening modeInput source signals Listening ModesTrigger Setup sub-menu Audio Adjust Audio Adjust Setup menuAudio Adjust Surr Mode D.F.2ch Surround SetupSurr Mode Analog/PCM Pro Logic II Music DimensionTHX Surround EX Dolby D THX SetupDecoder Front EffectVolume Setup sub-menu PreferencePreference menu Preference Headphones Level Setup sub-menuOSD Setup sub-menu OSD Position sub-menuFM Mode Tuning into a radio stationListening to a stereo radio station FM mode Press either the AM or FM input Source button TuningErasing a preset radio station Presetting a radio stationSelecting a preset radio station Listening to Radio BroadcastsEnjoying music or videos with the DTR-8.2 Adjusting the bass and trebleListening with headphones Temporarily turning off the soundRemote controller only Changing the listening modeDirect Setup Pure Audio Enter Return Enjoying music or videos with the DTR-8.2Adjusting the brightness of the front display Switching the displayUsing the sleep time remote controller only Temporarily changing the speaker output levelsEnjoying the multichannel output Changing the audio modeUsing the tone control Direct/Pure AudioSetup Enter Return Entering names for input sources and tuner stationsTo delete an entered name Adjusting the volume for the remote zone Playing music using the buttons on the DTR-8.2Selecting an input source using the remote controller Enjoying music in the remote zoneRecording a source Rec OutStart recording at the recording component as desired Recording a source Insert batteries Operate your components Using the remote controllerQuick Start Touch the screen to startQuick reference ModesIntelligent Remote Controller Direct-access buttonsIntroduction Touchscreen buttons IntroductionLeft and Right buttons Which Buttons Can Be Programmed?Charging the Remote Controller AA batteriesOptional recharging dock Introduction Activate the remote controller Getting StartedDefine the Brand of Your Device Select Yes to define the brand of the device to operate Getting StartedDefining brands by selecting Tap NextSelect your brand from the list Select a code set from the listDefining brands by searching Tap SearchSelect a Device Via the Home menuVia the Device menu Using touchscreen buttons Adjust the SettingsUsing the Left and Right button Using the direct-access buttonsFirst setup panel Second setup panelThird setup panel Programming Buttons Getting the Maximum out of itIntroduction Working with ModesProgramming control panel buttons Programming direct-access and Left/Right ButtonsGetting the Maximum out of it Programming device itemsLabeling a menu item Labeling Buttons and Menu ItemsLabeling a button Edit the labelAdding and Moving Devices Adding devicesMoving menu items Tap the item you want to restore Delete and restoreRestore DeleteRecording Macros and Setting Timers Editing macrosRecording macros Setting timers Editing timersOrganizing macros and timers into groups Switch to RF IR mode by using the Mode button Using the remote controller with Radio FrequencyChanging the remote controller’s RF IR Settings Tap RFChoosing Another Channel ChadEdit System requirementsWith ChadEdit you can Programming Problems TroubleshootingGeneral Problems Recharging ProblemsHow do I reset the Remote controller? Can I program a button to execute more than one command?How do I program source switching? How do I revert to the original configuration?Overview of Symbols Specifications Troubleshooting guide Troubleshooting guide Video and AudioIf one of the messages shown below appears Amplifier Section Tuner Section

DTR-8.2 specifications

The Integra DTR-8.2 is a high-performance A/V receiver that stands at the crossroads of functionality and sophistication, designed for the discerning audiophile and home theater enthusiast. This powerful receiver offers a robust suite of features and technologies that enhance the listening experience while seamlessly integrating into modern home entertainment setups.

One of the standout features of the DTR-8.2 is its advanced power amplification. With a 9.2 channel configuration, it delivers a potent output, ensuring that every movie, concert, or gaming session is filled with immersive sound. The receiver is equipped with high-current amplification and features a robust power supply, which works in tandem to deliver clear, dynamic audio even at high volumes.

In terms of audio processing, the DTR-8.2 supports Dolby Atmos and DTS:X, two cutting-edge technologies that create a three-dimensional sound environment. This immersive audio experience is further enhanced by its support for various high-resolution audio formats, allowing music lovers to enjoy studio-quality playback of their favorite tracks.

The receiver also features integrated network capabilities, with built-in Wi-Fi and Ethernet connectivity. This allows users to access a wide range of streaming services, including popular platforms like Spotify, Amazon Music, and Tidal. With Chromecast built-in, AirPlay 2, and DTS Play-Fi support, streaming high-quality audio from various devices has never been easier.

Another noteworthy characteristic of the DTR-8.2 is its comprehensive HDMI connectivity. It includes multiple HDMI inputs and outputs that support 4K/60Hz video, HDR10, Dolby Vision, and HDCP 2.2, making it compatible with the latest video formats and ensuring that users are future-proofed against evolving technology.

The Integra DTR-8.2 also incorporates room calibration technology, namely MCACC (Multi-Channel Acoustic Calibration System), which fine-tunes audio output to suit the specific acoustics of the listening space. This ensures that every listener receives an optimal sound experience, regardless of the room's layout.

In conclusion, the Integra DTR-8.2 is a multifaceted A/V receiver that combines cutting-edge audio and video technologies with user-friendly features. Its combination of power, versatility, and high-tech integrations makes it an ideal centerpiece for any home theater system, catering to those who seek both quality and performance in their audio-visual experiences.
Top Page Image Contents