Integra DTR-8.2 Hardware Setup menu, IR in Setup sub-menu, Speaker Impedance sub-menu

Page 31

Hardware Setup

0. Hardware Setup menu

Advanced Menu

0.Hardware Setup

1.Speaker Impedance 2.IR IN Setup

ENTERQuit:SETUP

0-2. IR IN Setup sub-menu

Advanced Menu

0.Hardware Setup

0-2.IR IN Setup

a.Position

:Main

 

Quit:SETUP

The Hardware Setup menu will need to be set before you use your DTR-8.2 for the first time. Once you set the Speaker Impedance setting at the Hardware Setup menu, the setting will not be displayed again when you enter the Basic Menu. To change the setting at a later date, select the Advanced Menu to display the Hardware Setup menu.

0-1. Speaker Impedance sub-menu

Set the impedance level to match the specifications of the speakers you are using.

If the impedances of all speakers are between 6 and 16 Ω, select “6 ohms.” If the impedance of even one speaker is between 4 and 6 Ω, select “4 ohms.”

Note:

Before you change this setting, be sure to first lower the volume at the DTR-8.2 to the minimum level.

Advanced Menu

0.Hardware Setup

0-1.Speaker Impedance

a.Minimum

:6 ohms

Quit:SETUP

This sub-menu allows you to set where you will be using the remote controller when you are using it in conjunction with the IR IN terminal (i.e. remote controller signals are input at the IR IN terminal).

Main: Select when you have a remote sensor for the remote controller connected to the IR IN terminal in the main room.

Zone 2: Select to perform the remote zone (Zone 2) operations from the remote zone.

31

Page 30 Page 32
Image 31
Page 30 Page 32
Contents DTR-8.2 Avis Important SafeguardsPrecautions Contents Contents Supplied accessories FeaturesUsing the remote controller Before using this unitInsert batteries Front panel display Front panel facilitiesFront panel Front doorFront panel facilities Return button Tuning / buttonsPreset / buttons Enter buttonRemote controller Remote controller Zone Coaxial cable Rear panel facilitiesDigital INPUT/OUTPUT coaxial and optical Improper connection Inserted completelyRCA type Power amplifierRear panel facilities 3 4Direct change function Power on/ready functionPower off function 12V Trigger A/B/ZONE 2 terminalDecoder Video jackConnections Connecting your audio componentsConnecting a turntable PH Connecting a compact disc player CDSignal flow Audio connection cable Left white Right red Connecting your video componentsFlow of the video signals is as follows Connecting a DVD player DVDConnecting a video cassette recorder Video Connecting a television monitor or projector Connecting video camera, etc. VideoSpeaker placement Connecting speakersIdeal speaker configuration Minimum speaker configuration for surround sound playbackConnecting a subwoofer Connecting speakersConnecting speakers Connecting the speaker cableWhen using the Surr BACK/ZONE 2 PRE OUT terminals Connecting the remote zone Zone 2 speakersWhen using the Surr BACK/ZONE 2 Speakers terminals When using the Zone 2 OUT terminalsOther component From connecting blockAssembling the AM loop antenna Connecting antennasConnecting the AM antenna cable Connecting the included antennasDirectional linkage Connecting antennasConnecting an FM outdoor antenna Connecting an AM outdoor antennaConnecting the power Basic Menu Setup menusAdvanced Menu Press the Setup button Setup menusNavigating through the Setup menu When using the buttons on the front panelSpeaker Impedance sub-menu Hardware SetupHardware Setup menu IR in Setup sub-menuSpeaker Setup menu Speaker SetupSpeaker Config sub-menu Speaker Distance sub-menu Speaker SetupRight Level Calibration sub-menuCalibrating the speaker levels LeftBass Peak Level Limiter Bass Peak Level Bass Peak Level Manager* sub-menuPeak Level Initial settings for each input source Input SetupInput Setup menu Digital Setup sub-menuDigital Format Input SetupMultichannel Setup sub-menu Digital InputComponent Video Video Setup sub-menuLast Valid enables the source last selected The source that VideoCharacter Display Intelli Volume sub-menuIntelli Volume Character Input sub-menuRelationship between input source and listening mode Listening Mode Preset sub-menuListening Modes Input source signalsTrigger Setup sub-menu Audio Adjust Setup menu Audio AdjustAudio Adjust Pro Logic II Music Dimension Surround SetupSurr Mode Analog/PCM Surr Mode D.F.2chFront Effect THX SetupDecoder THX Surround EX Dolby DPreference Volume Setup sub-menuPreference menu OSD Position sub-menu Headphones Level Setup sub-menuOSD Setup sub-menu PreferencePress either the AM or FM input Source button Tuning Tuning into a radio stationListening to a stereo radio station FM mode FM ModeListening to Radio Broadcasts Presetting a radio stationSelecting a preset radio station Erasing a preset radio stationTemporarily turning off the sound Adjusting the bass and trebleListening with headphones Enjoying music or videos with the DTR-8.2Enjoying music or videos with the DTR-8.2 Changing the listening modeDirect Setup Pure Audio Enter Return Remote controller onlyTemporarily changing the speaker output levels Switching the displayUsing the sleep time remote controller only Adjusting the brightness of the front displayDirect/Pure Audio Changing the audio modeUsing the tone control Enjoying the multichannel outputEntering names for input sources and tuner stations Setup Enter ReturnTo delete an entered name Enjoying music in the remote zone Playing music using the buttons on the DTR-8.2Selecting an input source using the remote controller Adjusting the volume for the remote zoneRec Out Recording a sourceStart recording at the recording component as desired Recording a source Touch the screen to start Using the remote controllerQuick Start Insert batteries Operate your componentsModes Quick referenceDirect-access buttons Intelligent Remote ControllerIntroduction Which Buttons Can Be Programmed? IntroductionLeft and Right buttons Touchscreen buttonsAA batteries Charging the Remote ControllerOptional recharging dock Introduction Getting Started Activate the remote controllerDefine the Brand of Your Device Tap Next Getting StartedDefining brands by selecting Select Yes to define the brand of the device to operateSelect a code set from the list Select your brand from the listTap Search Defining brands by searchingVia the Home menu Select a DeviceVia the Device menu Using the direct-access buttons Adjust the SettingsUsing the Left and Right button Using touchscreen buttonsSecond setup panel First setup panelThird setup panel Working with Modes Getting the Maximum out of itIntroduction Programming ButtonsProgramming device items Programming direct-access and Left/Right ButtonsGetting the Maximum out of it Programming control panel buttonsEdit the label Labeling Buttons and Menu ItemsLabeling a button Labeling a menu itemAdding devices Adding and Moving DevicesMoving menu items Delete Delete and restoreRestore Tap the item you want to restoreEditing macros Recording Macros and Setting TimersRecording macros Editing timers Setting timersOrganizing macros and timers into groups Tap RF Using the remote controller with Radio FrequencyChanging the remote controller’s RF IR Settings Switch to RF IR mode by using the Mode buttonChoosing Another Channel System requirements ChadEditWith ChadEdit you can Recharging Problems TroubleshootingGeneral Problems Programming ProblemsHow do I revert to the original configuration? Can I program a button to execute more than one command?How do I program source switching? How do I reset the Remote controller?Overview of Symbols Specifications Troubleshooting guide Video and Audio Troubleshooting guideIf one of the messages shown below appears Amplifier Section Tuner Section

DTR-8.2 specifications

The Integra DTR-8.2 is a high-performance A/V receiver that stands at the crossroads of functionality and sophistication, designed for the discerning audiophile and home theater enthusiast. This powerful receiver offers a robust suite of features and technologies that enhance the listening experience while seamlessly integrating into modern home entertainment setups.

One of the standout features of the DTR-8.2 is its advanced power amplification. With a 9.2 channel configuration, it delivers a potent output, ensuring that every movie, concert, or gaming session is filled with immersive sound. The receiver is equipped with high-current amplification and features a robust power supply, which works in tandem to deliver clear, dynamic audio even at high volumes.

In terms of audio processing, the DTR-8.2 supports Dolby Atmos and DTS:X, two cutting-edge technologies that create a three-dimensional sound environment. This immersive audio experience is further enhanced by its support for various high-resolution audio formats, allowing music lovers to enjoy studio-quality playback of their favorite tracks.

The receiver also features integrated network capabilities, with built-in Wi-Fi and Ethernet connectivity. This allows users to access a wide range of streaming services, including popular platforms like Spotify, Amazon Music, and Tidal. With Chromecast built-in, AirPlay 2, and DTS Play-Fi support, streaming high-quality audio from various devices has never been easier.

Another noteworthy characteristic of the DTR-8.2 is its comprehensive HDMI connectivity. It includes multiple HDMI inputs and outputs that support 4K/60Hz video, HDR10, Dolby Vision, and HDCP 2.2, making it compatible with the latest video formats and ensuring that users are future-proofed against evolving technology.

The Integra DTR-8.2 also incorporates room calibration technology, namely MCACC (Multi-Channel Acoustic Calibration System), which fine-tunes audio output to suit the specific acoustics of the listening space. This ensures that every listener receives an optimal sound experience, regardless of the room's layout.

In conclusion, the Integra DTR-8.2 is a multifaceted A/V receiver that combines cutting-edge audio and video technologies with user-friendly features. Its combination of power, versatility, and high-tech integrations makes it an ideal centerpiece for any home theater system, catering to those who seek both quality and performance in their audio-visual experiences.
Top Page Image Contents