Integra DTR-7.1 appendix Video IN/OUT, 12V Trigger A, B terminals

Page 15

Rear panel facilities

VIDEO IN/OUT

These are the video inputs and outputs. On the rear panel, there are 4 video inputs and 2 video outputs and each one includes both composite video and S video configurations. Connect VCRs, LD players, DVD players, and other video components to the video inputs.

The 2 video output channels can be used to be connected to video tape recorders for making recordings.

•When connecting a VCR or other video component, make sure you connect the audio and video leads together (i.e., both to VIDEO 3).

•The VIDEO 4 inputs are located on the front panel.

Composite video jack

S video jack

12V TRIGGER A, B terminals

These terminals are provided so that you can use the operation of the DTR-7.1 control the operation of another externally connected device. Connect the component to this 1/8-inch mini-jack terminal and when the set input source is selected, the device will turn on. Set the 12V TRIGGER terminal using the 12V Trigger setting of the 12V Trigger sub-menu (see page 40).

ZONE 2

These are the audio output jacks for the remote zone (Zone 2). Use these outputs to connect the remote zone. For the connection procedure, refer to “Connecting to the remote zone (Zone 2) input” on page 24. These outputs are activated by the Zone 2 button on the front panel.

AC INLET

Plug the supplied power cord into this AC INLET and then into the power outlet on the wall.

AC INLET

Power cord (supplied)

To an AC wall outlet

•Do not use a power cord other than the one supplied with the DTR-7.1. The power cord supplied is designed for use with the DTR-7.1 and should not be used with any other adevice.

•Never have the power cord disconnected from the DTR-7.1 while the other end is plugged into the wall outlet. Doing so may cause an electric shock. Always connect by plugging into the wall outlet last and disconnect by unplugging from the wall outlet first.

RS 232

The RS 232 port is to be used in conjunction with an external controller to control the operation of the DTR-7.1 by using an external device.

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents DTR-7.1 Avis Important SafeguardsPrecautions Contents Contents Supplied accessoriesTHX Select FeaturesUsing the remote controller Before using this unitFront panel facilities Front panelFront panel display Front panel facilities Character/Memory button Listening Mode buttonsRemote control sensor Menu button Tuned indicator Auto indicator Multi function displayRemote controller Speaker Impedance Rear panel facilitiesDigital INPUT/OUTPUT coaxial and optical Rear panel facilitiesSpeakers 12V Trigger A, B terminals Video IN/OUTExample of how to connect your equipment Standard connections Example of how to connect your equipmentDefault setting Power amplifier SeeConnecting your video components Connecting your audio componentsConnecting a turntable Connecting a compact disc playerConnecting a satellite tuner or television Connecting video camera or television gameConnecting a television monitor or projector Speaker placement Connecting speakersIdeal speaker configuration Minimum speaker configuration for surround sound playbackConnecting speakers Connecting speakersConnecting a subwoofer Hint Connecting antennasConnecting the AM loop antenna Assembling the AM loop antennaDirectional linkage Connecting antennasConnecting an FM outdoor antenna Connecting an AM outdoor antennaOutline Connecting to the remote zone Zone 2 inputMain zone Remote zone Zone Connecting to the IR in Main inputConnecting to the remote zone Zone 2 input When using the Zone 2 OUT terminalsConnecting two surround back speakers Connecting power amplifiers and two surround back speakersOn Stnby Connecting the powerConnecting the power Turning the power on from the remote controllerOn-Screen Display OSD menu On-Screen Display OSD menu Speaker Setup Speaker Setup menuSpeaker Config sub-menu Speaker Distance sub-menu Speaker SetupRight Level Calibration sub-menuCalibrating the speaker levels LeftBass Peak Level Bass Peak Level Manager* sub-menu Bass Peak Level LimiterBass Peak Level Initial settings for each input source Input SetupInput Setup menu Audio Setup sub-menuInput Setup Digital FormatMultichannel Video Setup sub-menu VideoComponent PCM fs=96k Listening Mode Preset sub-menuInput source signals 2ch SourceListening Modes TV Logic Theater-DimensionalEnhanced OrchestraIntelliVolume sub-menu Tone Control sub-menuTrigger sub-menu Listening Mode Setup menu Listening Mode SetupAll Ch Stereo Setup Listening Mode SetupMono Movie Setup Enhanced 7 SetupDescription listening mode parameters Dialog Enhance Listening angleFront Expander Virtual Surr LevelPreference OSD output OSD SetupOSD Setup menu OSD Config sub-menuOSD Setup OSD Setup sub-menuOSD Position sub-menu SSC Enjoying music in the remote zoneSelect a source VOLTUN AUDIO/TAPE ModeListening to Radio Broadcasts Listening to FM/AM Radio StationsListening to Radio Broadcasts Press the SSC dial to finalize the procedureEnjoying music or videos with the DTR-7.1 Adjusting the volumeChanging the listening mode Listening with headphonesEnjoying the multichannel input Using the many features of the DTR-7.1Enjoying music or videos with the DTR-7.1 If one of the messages shown below appearsStart recording at the recording component as Desired Recording a sourceRecording a source Characters available for name entry Giving a name to each preset radio stationOverview Using remote controllerUsing the remote controller to control each device Press the AUDIO/TAPE Mode buttonUsing remote controller Controlling an Integra/Onkyo CD player Press the CD Mode buttonPress the MD Mode button CD ModePress the TUN input selector button Controlling an Integra/Onkyo cassette tape deckControlling an Integra DVD player Press the DVD Mode buttonSAT, CABLE, VCR, and TV Mode buttons On Stnby DVD Mode DVD SET MenuLight Programming procedureDirect Mode Macro ENTPage Erasing the programmed command from one button Press and release the same Mode button againPress and release the same button again Programming a Macro function Using a Macro functionWhat is a Macro function? Press the Mode Macro button to complete the programmingCheck to see if the macro has been properly programmed Using a Macro functionPress the Direct Macro button to complete the procedure Programming the Direct Macro functionDirect Macro Press the Mode Macro button againMode Macro Press the Direct Macro button againOperation Press the ENT buttonTroubleshooting guide Troubleshooting guide Multichannel audio is not output Late Night function cannot be usedRe-EQ function cannot be used Parameter cannot be set for Front Effect, Room Size, etcAmplifier Section SpecificationsOnkyo U.S.A. Corporation

DTR-7.1 specifications

The Integra DTR-7.1 is a distinguished A/V receiver that exemplifies high-performance audio and video processing for home theater enthusiasts. Known for its meticulous engineering and robust feature set, the DTR-7.1 appeals to both audiophiles and casual viewers alike.

At the heart of the Integra DTR-7.1 lies a powerful amplification system that delivers 7.1 channels of immersive surround sound. With a substantial power output, the receiver ensures that even the most demanding soundtracks are reproduced with accuracy and clarity. The discrete power amplifier design contributes to lower distortion levels, providing a cleaner audio experience.

One of the standout features of the Integra DTR-7.1 is its advanced audio processing capabilities. It supports several high-definition formats, including Dolby TrueHD and DTS-HD Master Audio. This wide array of decoding options allows for a richly detailed auditory experience, especially when paired with high-definition media.

Moreover, the DTR-7.1 is equipped with cutting-edge video processing technology. It supports 4K and 1080p video resolutions, ensuring compatibility with the latest video formats. The integrated video scaling feature upscales lower-resolution content to near-4K quality, enhancing the viewing experience regardless of the source material.

Connectivity is another strong suit of the Integra DTR-7.1. The receiver boasts multiple HDMI inputs, facilitating easy connection to various devices such as Blu-ray players, gaming consoles, and streaming devices. Additionally, it supports features like ARC (Audio Return Channel) and CEC (Consumer Electronics Control), streamlining control and simplifying the setup process.

For ultimate customization, the DTR-7.1 includes an advanced auto-calibration system, which optimally adjusts sound settings based on the acoustics of the room and the speaker placement. This technology ensures that users achieve the best possible sound regardless of their home theater setup.

Finally, the Integra DTR-7.1 offers comprehensive network capabilities. It supports streaming services and internet radio, providing users with access to a vast library of music and content. Integration with home automation systems is also seamless, allowing users to control the receiver through smart devices for added convenience.

In summary, the Integra DTR-7.1 stands out as a top-tier A/V receiver, combining superior amplification, advanced audio and video processing, extensive connectivity options, and smart features, making it a worthy addition to any home theater system.
Top Page Image Contents