Integra Enjoying music or videos with the DTR-7.1, Using the many features of the DTR-7.1

Page 52

Enjoying music or videos with the DTR-7.1

Using the many features of the DTR-7.1

Outputting from different input source:

You can have the DTR-7.1 output the audio of one input source through the speakers while the video of another input source is output to the monitor (see page 36).

Assigning names to input sources:

You can enter a name for each input source so that when the source is selected the name of that source is displayed in the front display of the DTR-7.1 (see page 55).

Temporarily changing the speaker output levels:

To change the individual speaker volumes temporarily, use the remote controller and follow the procedure given below. Note that the calibration settings will return to the original settings when the DTR-7.1 is put in standby.

1.Press the CH SEL button and select the desired speaker.

2.Press the LEVEL + or – button to adjust the volume level.

Using the sleep time:

To set the sleep timer, press the SLEEP button on the remote controller and then set the time that you want the DTR-7.1 to enter the standby state (see page 57).

Temporarily turning off the sound:

To turn off the sound momentarily, such as when interrupted by a phone call, press the MUTING button on the remote controller (see page 57).

Adjusting the bass and treble:

You can adjust the bass and treble levels at the Tone Control sub-menu of the OSD menu: Input Setup → Tone Control (see page 40). You can also press the BASS/TREBLE button on the front to display either “BASS” or “TREBLE” in the front display (the display will change each time the button is pressed) and turn the SSC dial to adjust the volume. This function only affects the front left and right speakers, the center speaker, and the subwoofer.

Adjusting the brightness of the front display:

You can adjust the brightness of the front display of the DTR-7.1 with DIMMER button on the remote controller (see page 57).

If one of the messages shown below appears

If you try to perform an operation that is not possible, “Not available” appears followed by one of the messages shown below to explain the reason.

The operation is not allowed because headphones are plugged into the DTR-7.1.

The operation is not allowed because the selected input source is set for multichannel input.

The operation is not allowed by the current speaker configuration.

The operation is not allowed because the Zone 2 mode is turned on.

No setting other than Dolby Digital can be set.

Enjoying the multichannel input

Before you can use a component with multichannel output, you must first select “Yes” for the Multichannel setting in the OSD menu for that input source: Input Setup → Audio Setup (see page 34). Also, select “Multichannel” using the Audio Selector button on the front panel.

1.Press the input source button for the component with multichannel output connected to the MULTI CHANNEL INPUT on the rear of the DTR-7.1.

2.Turn on the connected component and start playing the desired media.

3.If necessary, press the CH SEL button on the remote controller to select an individual speaker. Then press the LEVEL + or – button to adjust the output level as desired.

Adjust the speaker output levels so that you can hear the same sound level from each speaker at the listening position. For the front right, front left, center, surround right, surround left, surround back right and surround back left speakers, the output levels can be adjusted between –12 to +12 decibels. The subwoofer can be adjusted between –15 and +12 decibels.

4.Adjust the volume with the Master Volume dial or the VOL buttons on the remote controller.

52

Page 51 Page 53
Image 52
Page 51 Page 53
Contents DTR-7.1 Important Safeguards AvisPrecautions Contents Supplied accessories ContentsFeatures THX SelectBefore using this unit Using the remote controllerFront panel Front panel facilitiesFront panel display Front panel facilities Listening Mode buttons Remote control sensor Menu buttonTuned indicator Auto indicator Multi function display Character/Memory buttonRemote controller Rear panel facilities Speaker ImpedanceRear panel facilities Digital INPUT/OUTPUT coaxial and opticalSpeakers Video IN/OUT 12V Trigger A, B terminalsExample of how to connect your equipment Example of how to connect your equipment Default settingPower amplifier See Standard connectionsConnecting your audio components Connecting a turntableConnecting a compact disc player Connecting your video componentsConnecting video camera or television game Connecting a satellite tuner or televisionConnecting a television monitor or projector Connecting speakers Ideal speaker configurationMinimum speaker configuration for surround sound playback Speaker placementConnecting speakers Connecting speakersConnecting a subwoofer Connecting antennas Connecting the AM loop antennaAssembling the AM loop antenna HintConnecting antennas Connecting an FM outdoor antennaConnecting an AM outdoor antenna Directional linkageConnecting to the remote zone Zone 2 input OutlineConnecting to the IR in Main input Connecting to the remote zone Zone 2 inputWhen using the Zone 2 OUT terminals Main zone Remote zone ZoneConnecting power amplifiers and two surround back speakers Connecting two surround back speakersConnecting the power Connecting the powerTurning the power on from the remote controller On StnbyOn-Screen Display OSD menu On-Screen Display OSD menu Speaker Setup menu Speaker SetupSpeaker Config sub-menu Speaker Setup Speaker Distance sub-menuLevel Calibration sub-menu Calibrating the speaker levelsLeft RightBass Peak Level Limiter Bass Peak Level Bass Peak Level Manager* sub-menuBass Peak Level Input Setup Input Setup menuAudio Setup sub-menu Initial settings for each input sourceDigital Format Input SetupMultichannel Video Video Setup sub-menuComponent Listening Mode Preset sub-menu Input source signals2ch Source PCM fs=96kListening Modes Theater-Dimensional EnhancedOrchestra TV LogicTone Control sub-menu IntelliVolume sub-menuTrigger sub-menu Listening Mode Setup Listening Mode Setup menuListening Mode Setup Mono Movie SetupEnhanced 7 Setup All Ch Stereo SetupDescription listening mode parameters Listening angle Front ExpanderVirtual Surr Level Dialog EnhancePreference OSD Setup OSD Setup menuOSD Config sub-menu OSD outputOSD Setup sub-menu OSD SetupOSD Position sub-menu Enjoying music in the remote zone Select a sourceVOL SSCAUDIO/TAPE Mode Listening to Radio BroadcastsListening to FM/AM Radio Stations TUNPress the SSC dial to finalize the procedure Listening to Radio BroadcastsAdjusting the volume Changing the listening modeListening with headphones Enjoying music or videos with the DTR-7.1Using the many features of the DTR-7.1 Enjoying music or videos with the DTR-7.1If one of the messages shown below appears Enjoying the multichannel inputRecording a source Start recording at the recording component as DesiredRecording a source Giving a name to each preset radio station Characters available for name entryUsing remote controller Using the remote controller to control each devicePress the AUDIO/TAPE Mode button OverviewUsing remote controller Press the CD Mode button Press the MD Mode buttonCD Mode Controlling an Integra/Onkyo CD playerControlling an Integra/Onkyo cassette tape deck Press the TUN input selector buttonPress the DVD Mode button SAT, CABLE, VCR, and TV Mode buttonsOn Stnby DVD Mode DVD SET Menu Controlling an Integra DVD playerProgramming procedure Direct Mode MacroENT LightPage Press and release the same Mode button again Erasing the programmed command from one buttonPress and release the same button again Using a Macro function What is a Macro function?Press the Mode Macro button to complete the programming Programming a Macro functionUsing a Macro function Press the Direct Macro button to complete the procedureProgramming the Direct Macro function Check to see if the macro has been properly programmedPress the Mode Macro button again Mode MacroPress the Direct Macro button again Direct MacroPress the ENT button OperationTroubleshooting guide Troubleshooting guide Late Night function cannot be used Re-EQ function cannot be usedParameter cannot be set for Front Effect, Room Size, etc Multichannel audio is not outputSpecifications Amplifier SectionOnkyo U.S.A. Corporation

DTR-7.1 specifications

The Integra DTR-7.1 is a distinguished A/V receiver that exemplifies high-performance audio and video processing for home theater enthusiasts. Known for its meticulous engineering and robust feature set, the DTR-7.1 appeals to both audiophiles and casual viewers alike.

At the heart of the Integra DTR-7.1 lies a powerful amplification system that delivers 7.1 channels of immersive surround sound. With a substantial power output, the receiver ensures that even the most demanding soundtracks are reproduced with accuracy and clarity. The discrete power amplifier design contributes to lower distortion levels, providing a cleaner audio experience.

One of the standout features of the Integra DTR-7.1 is its advanced audio processing capabilities. It supports several high-definition formats, including Dolby TrueHD and DTS-HD Master Audio. This wide array of decoding options allows for a richly detailed auditory experience, especially when paired with high-definition media.

Moreover, the DTR-7.1 is equipped with cutting-edge video processing technology. It supports 4K and 1080p video resolutions, ensuring compatibility with the latest video formats. The integrated video scaling feature upscales lower-resolution content to near-4K quality, enhancing the viewing experience regardless of the source material.

Connectivity is another strong suit of the Integra DTR-7.1. The receiver boasts multiple HDMI inputs, facilitating easy connection to various devices such as Blu-ray players, gaming consoles, and streaming devices. Additionally, it supports features like ARC (Audio Return Channel) and CEC (Consumer Electronics Control), streamlining control and simplifying the setup process.

For ultimate customization, the DTR-7.1 includes an advanced auto-calibration system, which optimally adjusts sound settings based on the acoustics of the room and the speaker placement. This technology ensures that users achieve the best possible sound regardless of their home theater setup.

Finally, the Integra DTR-7.1 offers comprehensive network capabilities. It supports streaming services and internet radio, providing users with access to a vast library of music and content. Integration with home automation systems is also seamless, allowing users to control the receiver through smart devices for added convenience.

In summary, the Integra DTR-7.1 stands out as a top-tier A/V receiver, combining superior amplification, advanced audio and video processing, extensive connectivity options, and smart features, making it a worthy addition to any home theater system.
Top Page Image Contents