Integra DTR-7.1 Example of how to connect your equipment, Standard connections, Default setting

Page 17

Example of how to connect your equipment

Standard connections

RS 232

TV monitor or Projector

(MONITOR OUT)

8. Refer to page 19

Here is explanation of how to connect the main components to the DTR-7.1 in the standard manner. There are many ways that any one component can be connected, and it is up to you to decide which method best fits your situation. The directions given here are only one option and should only be thought of as such. It is best to fully understand the nature of each connector and terminal as well as each of your components and their features to ascertain which method of connection is best.

•Be sure to always refer to the instruction manual that came with the component that you are connecting.

•Do not plug in the power cord until all connections have been made.

•For input jacks, red connectors (marked R) are used for the right channel, white connectors (marked L) are used for the left channel, and yellow connectors (marked V) are used for video connection.

•Insert all plugs and connectors securely. Improper connections can result in noise, poor performance, or damage to the equipment.

•Do not bind audio connection cables with power cords and speaker cables. Doing so may adversely affect the sound quality.

For a detailed explanation of how to connect the devices given below, refer to the pages listed.

Speakers: See page 20

Radio antenna: See page 22

Enjoying the DTR-7.1 from a remote room (Zone 2):

See page 24

Power amplifier: See page 26

Default setting

Input source

Digital input

Component video

 

 

 

CD

OPTICAL 1

 

 

 

 

PHONO

----

 

 

 

 

FM

 

 

 

 

 

AM

 

 

 

 

 

TAPE

----

 

 

 

 

DVD

COAXIAL 1

INPUT 1

 

 

 

VIDEO 1

COAXIAL 2

----

 

 

 

VIDEO 2

----

----

 

 

 

VIDEO 3

OPTICAL 2

INPUT 2

 

 

 

VIDEO 4

----

----

 

 

 

----: No setting : Not applicable

17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents DTR-7.1 Avis Important SafeguardsPrecautions Contents Contents Supplied accessoriesTHX Select FeaturesUsing the remote controller Before using this unitFront panel display Front panel facilitiesFront panel Front panel facilities Remote control sensor Menu button Listening Mode buttonsTuned indicator Auto indicator Multi function display Character/Memory buttonRemote controller Speaker Impedance Rear panel facilitiesDigital INPUT/OUTPUT coaxial and optical Rear panel facilitiesSpeakers 12V Trigger A, B terminals Video IN/OUTExample of how to connect your equipment Default setting Example of how to connect your equipmentPower amplifier See Standard connectionsConnecting a turntable Connecting your audio componentsConnecting a compact disc player Connecting your video componentsConnecting a television monitor or projector Connecting a satellite tuner or televisionConnecting video camera or television game Ideal speaker configuration Connecting speakersMinimum speaker configuration for surround sound playback Speaker placementConnecting a subwoofer Connecting speakersConnecting speakers Connecting the AM loop antenna Connecting antennasAssembling the AM loop antenna HintConnecting an FM outdoor antenna Connecting antennasConnecting an AM outdoor antenna Directional linkageOutline Connecting to the remote zone Zone 2 inputConnecting to the remote zone Zone 2 input Connecting to the IR in Main inputWhen using the Zone 2 OUT terminals Main zone Remote zone ZoneConnecting two surround back speakers Connecting power amplifiers and two surround back speakersConnecting the power Connecting the powerTurning the power on from the remote controller On StnbyOn-Screen Display OSD menu On-Screen Display OSD menu Speaker Config sub-menu Speaker SetupSpeaker Setup menu Speaker Distance sub-menu Speaker SetupCalibrating the speaker levels Level Calibration sub-menuLeft RightBass Peak Level Bass Peak Level Bass Peak Level Manager* sub-menuBass Peak Level Limiter Input Setup menu Input SetupAudio Setup sub-menu Initial settings for each input sourceMultichannel Input SetupDigital Format Component Video Setup sub-menuVideo Input source signals Listening Mode Preset sub-menu2ch Source PCM fs=96kListening Modes Enhanced Theater-DimensionalOrchestra TV LogicTrigger sub-menu IntelliVolume sub-menuTone Control sub-menu Listening Mode Setup menu Listening Mode SetupMono Movie Setup Listening Mode SetupEnhanced 7 Setup All Ch Stereo SetupDescription listening mode parameters Front Expander Listening angleVirtual Surr Level Dialog EnhancePreference OSD Setup menu OSD SetupOSD Config sub-menu OSD outputOSD Position sub-menu OSD SetupOSD Setup sub-menu Select a source Enjoying music in the remote zoneVOL SSCListening to Radio Broadcasts AUDIO/TAPE ModeListening to FM/AM Radio Stations TUNListening to Radio Broadcasts Press the SSC dial to finalize the procedureChanging the listening mode Adjusting the volumeListening with headphones Enjoying music or videos with the DTR-7.1Enjoying music or videos with the DTR-7.1 Using the many features of the DTR-7.1If one of the messages shown below appears Enjoying the multichannel inputStart recording at the recording component as Desired Recording a sourceRecording a source Characters available for name entry Giving a name to each preset radio stationUsing the remote controller to control each device Using remote controllerPress the AUDIO/TAPE Mode button OverviewUsing remote controller Press the MD Mode button Press the CD Mode buttonCD Mode Controlling an Integra/Onkyo CD playerPress the TUN input selector button Controlling an Integra/Onkyo cassette tape deckSAT, CABLE, VCR, and TV Mode buttons Press the DVD Mode buttonOn Stnby DVD Mode DVD SET Menu Controlling an Integra DVD playerDirect Mode Macro Programming procedureENT LightPage Press and release the same button again Erasing the programmed command from one buttonPress and release the same Mode button again What is a Macro function? Using a Macro functionPress the Mode Macro button to complete the programming Programming a Macro functionPress the Direct Macro button to complete the procedure Using a Macro functionProgramming the Direct Macro function Check to see if the macro has been properly programmedMode Macro Press the Mode Macro button againPress the Direct Macro button again Direct MacroOperation Press the ENT buttonTroubleshooting guide Troubleshooting guide Re-EQ function cannot be used Late Night function cannot be usedParameter cannot be set for Front Effect, Room Size, etc Multichannel audio is not outputAmplifier Section SpecificationsOnkyo U.S.A. Corporation

DTR-7.1 specifications

The Integra DTR-7.1 is a distinguished A/V receiver that exemplifies high-performance audio and video processing for home theater enthusiasts. Known for its meticulous engineering and robust feature set, the DTR-7.1 appeals to both audiophiles and casual viewers alike.

At the heart of the Integra DTR-7.1 lies a powerful amplification system that delivers 7.1 channels of immersive surround sound. With a substantial power output, the receiver ensures that even the most demanding soundtracks are reproduced with accuracy and clarity. The discrete power amplifier design contributes to lower distortion levels, providing a cleaner audio experience.

One of the standout features of the Integra DTR-7.1 is its advanced audio processing capabilities. It supports several high-definition formats, including Dolby TrueHD and DTS-HD Master Audio. This wide array of decoding options allows for a richly detailed auditory experience, especially when paired with high-definition media.

Moreover, the DTR-7.1 is equipped with cutting-edge video processing technology. It supports 4K and 1080p video resolutions, ensuring compatibility with the latest video formats. The integrated video scaling feature upscales lower-resolution content to near-4K quality, enhancing the viewing experience regardless of the source material.

Connectivity is another strong suit of the Integra DTR-7.1. The receiver boasts multiple HDMI inputs, facilitating easy connection to various devices such as Blu-ray players, gaming consoles, and streaming devices. Additionally, it supports features like ARC (Audio Return Channel) and CEC (Consumer Electronics Control), streamlining control and simplifying the setup process.

For ultimate customization, the DTR-7.1 includes an advanced auto-calibration system, which optimally adjusts sound settings based on the acoustics of the room and the speaker placement. This technology ensures that users achieve the best possible sound regardless of their home theater setup.

Finally, the Integra DTR-7.1 offers comprehensive network capabilities. It supports streaming services and internet radio, providing users with access to a vast library of music and content. Integration with home automation systems is also seamless, allowing users to control the receiver through smart devices for added convenience.

In summary, the Integra DTR-7.1 stands out as a top-tier A/V receiver, combining superior amplification, advanced audio and video processing, extensive connectivity options, and smart features, making it a worthy addition to any home theater system.
Top Page Image Contents