Integra DTR-7.1 appendix Troubleshooting guide

Page 69

Troubleshooting guide

FM/AM TUNER

AM stations cannot be received.

•AM loop antenna is not connected.

➞Connect the included AM loop antenna to the AM antenna terminals.

Buzzing noise on AM stations (particularly noticeable at night or with weak stations).

•Noise from electrical apparatus such as fluorescent lamp.

➞Move the AM loop antenna to different position.

➞Set up an outdoor AM antenna.

Noise is heard at high-pitched sounds on AM stations.

•Noise from TV set.

➞Place the AM loop antenna as far as possible from the TV.

➞Move unit away from TV set.

Crackling noise on both AM and FM stations

•Noise caused by fluorescent lamp being turned on and off.

➞Move antenna as far as possible from the fluorescent lamp.

•Noise from automobile ignition.

➞Install an FM outdoor antenna as far as possible from the road.

➞Change the position or direction of the outdoor antenna.

The indicators light for stereo reception, but sound is distorted and stereo separation is bad.

•Station is too strong.

➞Change to FM indoor antenna.

•Multiple reflection of the radio waves because of tall buildings or mountains.

➞Use antenna that has better directivity and select a point where distortion is least.

Indicators for stereo reception flicker and hiss is heard on FM stations.

•Station is too weak.

➞Install an outdoor FM antenna.

•Stereo FM broadcasts cover only about half the distance of an ordinary broadcast.

➞Change the position or direction of the outdoor antenna.

No preset station is recalled.

•Power cord has been unplugged or the POWER switch has been turned off for a long time.

➞ The memory contents are lost. Store all stations again.

VIDEO and AUDIO

Desired picture does not appear.

•Improper connection.

➞Check the connection again. Insert the plugs and connectors completely.

•Video Setup sub-menu of Input Setup menu settings are incorrect.

➞Check Settings.

No OSD Menu display.

•Improper connection.

➞Check connections.

•OSD Menu is displayed when monitor is connected to VIDEO or S VIDEO of MONITOR OUT.

➞Confirm connections.

•Monitor is connected to MONITOR OUT VIDEO when the OSD output is set to “S Video” or monitor is connected to MONITOR OUT S VIDEO when the OSD output is set to “Video.”

➞Check the OSD Config sub-menu of OSD Setup (page 29).

Picture and sound do not match.

•Improper connection.

➞Check connections.

•Video Setup sub-menu of Input Setup menu settings are incorrect.

➞Check settings.

No sound, or sound of the selected source is not heard.

•Digital Setup sub-menu of Input Setup menu settings are incorrect.

➞ Check settings.

No picture appears on the TV screen (or monitor).

•TV (or monitor) is not set to receive the output signals from the receiver.

➞Set the TV (or monitor) to the receiver input.

•Video cable is not connected securely.

➞Check connections.

•S VIDEO IN signal is output at VIDEO OUT and S VIDEO OUT, but VIDEO IN signal is only output at VIDEO OUT. Also, COMPONENT VIDEO IN signal is only output at

COMPONENT VIDEO OUT.

➞Check the input and output signals.

69

Page 68 Page 70
Image 69
Page 68 Page 70
Contents DTR-7.1 Avis Important SafeguardsPrecautions Contents Contents Supplied accessoriesTHX Select FeaturesUsing the remote controller Before using this unitFront panel facilities Front panelFront panel display Front panel facilities Remote control sensor Menu button Listening Mode buttonsTuned indicator Auto indicator Multi function display Character/Memory buttonRemote controller Speaker Impedance Rear panel facilitiesDigital INPUT/OUTPUT coaxial and optical Rear panel facilitiesSpeakers 12V Trigger A, B terminals Video IN/OUTExample of how to connect your equipment Default setting Example of how to connect your equipmentPower amplifier See Standard connectionsConnecting a turntable Connecting your audio componentsConnecting a compact disc player Connecting your video componentsConnecting a satellite tuner or television Connecting video camera or television gameConnecting a television monitor or projector Ideal speaker configuration Connecting speakersMinimum speaker configuration for surround sound playback Speaker placementConnecting speakers Connecting speakersConnecting a subwoofer Connecting the AM loop antenna Connecting antennasAssembling the AM loop antenna HintConnecting an FM outdoor antenna Connecting antennasConnecting an AM outdoor antenna Directional linkageOutline Connecting to the remote zone Zone 2 inputConnecting to the remote zone Zone 2 input Connecting to the IR in Main inputWhen using the Zone 2 OUT terminals Main zone Remote zone ZoneConnecting two surround back speakers Connecting power amplifiers and two surround back speakersConnecting the power Connecting the powerTurning the power on from the remote controller On StnbyOn-Screen Display OSD menu On-Screen Display OSD menu Speaker Setup Speaker Setup menuSpeaker Config sub-menu Speaker Distance sub-menu Speaker SetupCalibrating the speaker levels Level Calibration sub-menuLeft RightBass Peak Level Bass Peak Level Manager* sub-menu Bass Peak Level LimiterBass Peak Level Input Setup menu Input SetupAudio Setup sub-menu Initial settings for each input sourceInput Setup Digital FormatMultichannel Video Setup sub-menu VideoComponent Input source signals Listening Mode Preset sub-menu2ch Source PCM fs=96kListening Modes Enhanced Theater-DimensionalOrchestra TV LogicIntelliVolume sub-menu Tone Control sub-menuTrigger sub-menu Listening Mode Setup menu Listening Mode SetupMono Movie Setup Listening Mode SetupEnhanced 7 Setup All Ch Stereo SetupDescription listening mode parameters Front Expander Listening angleVirtual Surr Level Dialog EnhancePreference OSD Setup menu OSD SetupOSD Config sub-menu OSD outputOSD Setup OSD Setup sub-menuOSD Position sub-menu Select a source Enjoying music in the remote zoneVOL SSCListening to Radio Broadcasts AUDIO/TAPE ModeListening to FM/AM Radio Stations TUNListening to Radio Broadcasts Press the SSC dial to finalize the procedureChanging the listening mode Adjusting the volumeListening with headphones Enjoying music or videos with the DTR-7.1Enjoying music or videos with the DTR-7.1 Using the many features of the DTR-7.1If one of the messages shown below appears Enjoying the multichannel inputStart recording at the recording component as Desired Recording a sourceRecording a source Characters available for name entry Giving a name to each preset radio stationUsing the remote controller to control each device Using remote controllerPress the AUDIO/TAPE Mode button OverviewUsing remote controller Press the MD Mode button Press the CD Mode buttonCD Mode Controlling an Integra/Onkyo CD playerPress the TUN input selector button Controlling an Integra/Onkyo cassette tape deckSAT, CABLE, VCR, and TV Mode buttons Press the DVD Mode buttonOn Stnby DVD Mode DVD SET Menu Controlling an Integra DVD playerDirect Mode Macro Programming procedureENT LightPage Erasing the programmed command from one button Press and release the same Mode button againPress and release the same button again What is a Macro function? Using a Macro functionPress the Mode Macro button to complete the programming Programming a Macro functionPress the Direct Macro button to complete the procedure Using a Macro functionProgramming the Direct Macro function Check to see if the macro has been properly programmedMode Macro Press the Mode Macro button againPress the Direct Macro button again Direct MacroOperation Press the ENT buttonTroubleshooting guide Troubleshooting guide Re-EQ function cannot be used Late Night function cannot be usedParameter cannot be set for Front Effect, Room Size, etc Multichannel audio is not outputAmplifier Section SpecificationsOnkyo U.S.A. Corporation

DTR-7.1 specifications

The Integra DTR-7.1 is a distinguished A/V receiver that exemplifies high-performance audio and video processing for home theater enthusiasts. Known for its meticulous engineering and robust feature set, the DTR-7.1 appeals to both audiophiles and casual viewers alike.

At the heart of the Integra DTR-7.1 lies a powerful amplification system that delivers 7.1 channels of immersive surround sound. With a substantial power output, the receiver ensures that even the most demanding soundtracks are reproduced with accuracy and clarity. The discrete power amplifier design contributes to lower distortion levels, providing a cleaner audio experience.

One of the standout features of the Integra DTR-7.1 is its advanced audio processing capabilities. It supports several high-definition formats, including Dolby TrueHD and DTS-HD Master Audio. This wide array of decoding options allows for a richly detailed auditory experience, especially when paired with high-definition media.

Moreover, the DTR-7.1 is equipped with cutting-edge video processing technology. It supports 4K and 1080p video resolutions, ensuring compatibility with the latest video formats. The integrated video scaling feature upscales lower-resolution content to near-4K quality, enhancing the viewing experience regardless of the source material.

Connectivity is another strong suit of the Integra DTR-7.1. The receiver boasts multiple HDMI inputs, facilitating easy connection to various devices such as Blu-ray players, gaming consoles, and streaming devices. Additionally, it supports features like ARC (Audio Return Channel) and CEC (Consumer Electronics Control), streamlining control and simplifying the setup process.

For ultimate customization, the DTR-7.1 includes an advanced auto-calibration system, which optimally adjusts sound settings based on the acoustics of the room and the speaker placement. This technology ensures that users achieve the best possible sound regardless of their home theater setup.

Finally, the Integra DTR-7.1 offers comprehensive network capabilities. It supports streaming services and internet radio, providing users with access to a vast library of music and content. Integration with home automation systems is also seamless, allowing users to control the receiver through smart devices for added convenience.

In summary, the Integra DTR-7.1 stands out as a top-tier A/V receiver, combining superior amplification, advanced audio and video processing, extensive connectivity options, and smart features, making it a worthy addition to any home theater system.
Top Page Image Contents