Integra DTR-7.1 appendix Listening angle, Front Expander, Virtual Surr Level, Dialog Enhance

Page 44

Listening Mode Setup

Listening angle

The listening angle is the angle subtended by the front left and right speakers as seen from the listener. The setting of 20 and 40 degrees are only for nominal purposes, so select the setting that is closest to your actual listening angle.

Front left speaker

Front right speaker

Listening angle

Center

For systems that have a center speaker, the center channel signal can be output from the center speaker. For instance, in systems where the front left and right speakers are small, use of the center speaker may provide a better sound space. (If your system uses a center speaker, be sure to perform the level calibration with the left and right speakers in the Speaker Setup menu beforehand.)

On: The center channel signal is output to the center speaker.

Off: The center channel signal is output from the front left and right speakers (Phantom Center).

Relationship between listening mode and parameter

Front Expander

The front expander function spreads out the sound from the front speakers for the feeling of a wide sound space.

On: Select to turn on the front expander function to simulate a wider sound space.

Off: Select to turn off the front expander function for a normal sound space.

Virtual Surr Level

This parameter adjusts the virtual surround level. This can be set from –3 to +3 decibels.

Dialog Enhance

This parameter allows you to adjust the dialog sound level from the center speaker if it is difficult to hear.

On: Enhances the vocal ranges for the center channel signal.

Off: Outputs the center channel signal at the regular level and frequency characteristics.

Listening mode

Direct

Stereo

T-D

Surround*

THX

Mono Movie

Enhanced 7

All Ch

 

 

 

(Theater-

 

 

Orchestra

 

Stereo

 

 

 

Dimensional)

 

 

Unplugged

 

 

 

 

 

 

 

 

Studio-Mix

 

 

Parameter

 

 

 

 

 

TV Logic

 

 

Subwoofer

 

●

●

●

●

●

●

●

Re-EQ

 

 

 

●

●

●

●

●

Surround Speakers

 

 

 

●

●

●

 

 

Dolby D 6.1

 

 

 

●

 

 

 

 

DTS-ES

 

 

 

●

 

 

 

 

Dolby D THX Surround EX

 

 

 

 

●

 

 

 

DTS THX Surround EX

 

 

 

 

●

 

 

 

Listening Angle

 

 

●

 

 

 

 

 

Center

 

 

●

 

 

 

 

 

Front Expander

 

 

●

 

 

 

 

 

Virtual Surr Level

 

 

●

 

 

 

 

 

Dialog Enhance

 

 

●

 

 

 

 

 

Front Effect

 

 

 

 

 

●

●

 

Effect Level

 

 

 

 

 

●

●

 

Room Size

 

 

 

 

 

●

●

 

The parameters that can be set are different for each listening mode.

*The surround given here refers to basic surround modes and consists of Dolby Pro Logic, Dolby Digital, DTS, etc.

44

Page 43 Page 45
Image 44
Page 43 Page 45
Contents DTR-7.1 Important Safeguards AvisPrecautions Contents Supplied accessories ContentsFeatures THX SelectBefore using this unit Using the remote controllerFront panel display Front panel facilitiesFront panel Front panel facilities Listening Mode buttons Remote control sensor Menu buttonTuned indicator Auto indicator Multi function display Character/Memory buttonRemote controller Rear panel facilities Speaker ImpedanceRear panel facilities Digital INPUT/OUTPUT coaxial and opticalSpeakers Video IN/OUT 12V Trigger A, B terminalsExample of how to connect your equipment Example of how to connect your equipment Default settingPower amplifier See Standard connectionsConnecting your audio components Connecting a turntableConnecting a compact disc player Connecting your video componentsConnecting a television monitor or projector Connecting a satellite tuner or televisionConnecting video camera or television game Connecting speakers Ideal speaker configurationMinimum speaker configuration for surround sound playback Speaker placementConnecting a subwoofer Connecting speakersConnecting speakers Connecting antennas Connecting the AM loop antennaAssembling the AM loop antenna HintConnecting antennas Connecting an FM outdoor antennaConnecting an AM outdoor antenna Directional linkageConnecting to the remote zone Zone 2 input OutlineConnecting to the IR in Main input Connecting to the remote zone Zone 2 inputWhen using the Zone 2 OUT terminals Main zone Remote zone ZoneConnecting power amplifiers and two surround back speakers Connecting two surround back speakersConnecting the power Connecting the powerTurning the power on from the remote controller On StnbyOn-Screen Display OSD menu On-Screen Display OSD menu Speaker Config sub-menu Speaker SetupSpeaker Setup menu Speaker Setup Speaker Distance sub-menuLevel Calibration sub-menu Calibrating the speaker levelsLeft RightBass Peak Level Bass Peak Level Bass Peak Level Manager* sub-menuBass Peak Level Limiter Input Setup Input Setup menuAudio Setup sub-menu Initial settings for each input sourceMultichannel Input SetupDigital Format Component Video Setup sub-menuVideo Listening Mode Preset sub-menu Input source signals2ch Source PCM fs=96kListening Modes Theater-Dimensional EnhancedOrchestra TV LogicTrigger sub-menu IntelliVolume sub-menuTone Control sub-menu Listening Mode Setup Listening Mode Setup menuListening Mode Setup Mono Movie SetupEnhanced 7 Setup All Ch Stereo SetupDescription listening mode parameters Listening angle Front ExpanderVirtual Surr Level Dialog EnhancePreference OSD Setup OSD Setup menuOSD Config sub-menu OSD outputOSD Position sub-menu OSD SetupOSD Setup sub-menu Enjoying music in the remote zone Select a sourceVOL SSCAUDIO/TAPE Mode Listening to Radio BroadcastsListening to FM/AM Radio Stations TUNPress the SSC dial to finalize the procedure Listening to Radio BroadcastsAdjusting the volume Changing the listening modeListening with headphones Enjoying music or videos with the DTR-7.1Using the many features of the DTR-7.1 Enjoying music or videos with the DTR-7.1If one of the messages shown below appears Enjoying the multichannel inputRecording a source Start recording at the recording component as DesiredRecording a source Giving a name to each preset radio station Characters available for name entryUsing remote controller Using the remote controller to control each devicePress the AUDIO/TAPE Mode button OverviewUsing remote controller Press the CD Mode button Press the MD Mode buttonCD Mode Controlling an Integra/Onkyo CD playerControlling an Integra/Onkyo cassette tape deck Press the TUN input selector buttonPress the DVD Mode button SAT, CABLE, VCR, and TV Mode buttonsOn Stnby DVD Mode DVD SET Menu Controlling an Integra DVD playerProgramming procedure Direct Mode MacroENT LightPage Press and release the same button again Erasing the programmed command from one buttonPress and release the same Mode button again Using a Macro function What is a Macro function?Press the Mode Macro button to complete the programming Programming a Macro functionUsing a Macro function Press the Direct Macro button to complete the procedureProgramming the Direct Macro function Check to see if the macro has been properly programmedPress the Mode Macro button again Mode MacroPress the Direct Macro button again Direct MacroPress the ENT button OperationTroubleshooting guide Troubleshooting guide Late Night function cannot be used Re-EQ function cannot be usedParameter cannot be set for Front Effect, Room Size, etc Multichannel audio is not outputSpecifications Amplifier SectionOnkyo U.S.A. Corporation

DTR-7.1 specifications

The Integra DTR-7.1 is a distinguished A/V receiver that exemplifies high-performance audio and video processing for home theater enthusiasts. Known for its meticulous engineering and robust feature set, the DTR-7.1 appeals to both audiophiles and casual viewers alike.

At the heart of the Integra DTR-7.1 lies a powerful amplification system that delivers 7.1 channels of immersive surround sound. With a substantial power output, the receiver ensures that even the most demanding soundtracks are reproduced with accuracy and clarity. The discrete power amplifier design contributes to lower distortion levels, providing a cleaner audio experience.

One of the standout features of the Integra DTR-7.1 is its advanced audio processing capabilities. It supports several high-definition formats, including Dolby TrueHD and DTS-HD Master Audio. This wide array of decoding options allows for a richly detailed auditory experience, especially when paired with high-definition media.

Moreover, the DTR-7.1 is equipped with cutting-edge video processing technology. It supports 4K and 1080p video resolutions, ensuring compatibility with the latest video formats. The integrated video scaling feature upscales lower-resolution content to near-4K quality, enhancing the viewing experience regardless of the source material.

Connectivity is another strong suit of the Integra DTR-7.1. The receiver boasts multiple HDMI inputs, facilitating easy connection to various devices such as Blu-ray players, gaming consoles, and streaming devices. Additionally, it supports features like ARC (Audio Return Channel) and CEC (Consumer Electronics Control), streamlining control and simplifying the setup process.

For ultimate customization, the DTR-7.1 includes an advanced auto-calibration system, which optimally adjusts sound settings based on the acoustics of the room and the speaker placement. This technology ensures that users achieve the best possible sound regardless of their home theater setup.

Finally, the Integra DTR-7.1 offers comprehensive network capabilities. It supports streaming services and internet radio, providing users with access to a vast library of music and content. Integration with home automation systems is also seamless, allowing users to control the receiver through smart devices for added convenience.

In summary, the Integra DTR-7.1 stands out as a top-tier A/V receiver, combining superior amplification, advanced audio and video processing, extensive connectivity options, and smart features, making it a worthy addition to any home theater system.
Top Page Image Contents