Integra DTR-4.6 Connecting the Power Cords of Other Components, Connecting the RS232 Port

Page 34

DTR-4.6.book Page 34 Thursday, September 22, 2005 1:45 PM

Connecting Your Components—Continued

Connecting the Power Cords of Other Components

The AV receiver has AC outlets on its rear panel that can be used to connect the power cords of other components that you intend to use with the AV receiver. These com- ponents can then be left turned on so that they turn on and off as and when the AV receiver is turned on and set to Standby.

AC OUTLETS

AC 120V 60 Hz

SWITCHED

TOTAL 120W 1A MAX.

Caution:

•Make sure that the total capacity of the components that you connect to the AC OUTLETS does not exceed the stated capacity (e.g., TOTAL 120 W).

Note:

•Integra components connected via should be con- nected directly to a wall outlet, not an AC OUTLET on the AV receiver.

•The number of AC OUTLETS, socket type, and total capacity depends on the country in which you pur- chased the AV receiver.

Connecting the RS232 Port

This port is for connecting the AV receiver to home auto- mation equipment and external controllers.

Connecting the Power Cord

Notes:

•Before connecting the power cord, connect all of your speakers and AV components.

•Turning on the AV receiver may cause a momentary power surge that might interfere with other electrical equipment on the same circuit. If this is a problem, plug the AV receiver into a different branch circuit.

•Do not use a power cord other than the one supplied with the AV receiver. The supplied power cord is designed exclusively for use with the AV receiver and should not be used with any other equipment.

•Never disconnect the power cord from the AV receiver while the other end is still plugged into a wall outlet. Doing so may cause an electric shock. Always discon- nect the power cord from the wall outlet first, and then the AV receiver.

1Connect the supplied power cord to the AV receiver’s AC INLET.

2Plug the power cord into an AC wall outlet.

The Standby indicator lights up.

34

Page 33 Page 35
Image 34
Page 33 Page 35
Contents DTR-4.6 Important Safety Instructions AvisPrecautions PowerMake sure you have the following accessories Supplied AccessoriesSpeaker cable labels Contents Features Installing the Batteries Before Using the AV receiverUsing the Remote Controller Getting to Know the AV Receiver Front PanelGetting to Know the AV Receiver DisplayXM antenna Rear PanelComponent Video in 1, 2, IR in A/B and OUTVideo 1 IN/OUT and Video 2 IN/OUT These terminal posts are for connecting speakers in ZoneThis jack is for connecting a powered subwoofer FRONT, CENTER, and Surround SpeakersAbout the Remote Controller Modes Remote ControllerReceiver/Tape Mode Remote Controller DVD Mode CD, MD, and CDR Modes HDD Mode Connecting Your Speakers Enjoying Home TheaterConnecting Your Speakers Connecting Your SpeakersConnecting the Speaker Cables Speaker Connection PrecautionsStrip about 5/8 Connecting the Indoor FM Antenna Connecting AntennaConnecting the AM Loop Antenna Attach the FM antenna, as shownConnecting an Outdoor AM Antenna Connecting AntennaConnecting an Outdoor FM Antenna Using a TV/FM Antenna SplitterOptical Digital Jacks Connecting Your ComponentsAbout AV Connections AV Connection Color CodingWhich Connections Should I Use? Connecting Your ComponentsConnecting Audio and Video Signals to the AV Receiver Video Connection FormatsAudio Connection Connecting a TV or ProjectorVideo Connection HintConnecting a DVD player Or the otherHooking Up the Multichannel DVD Input Connecting a VCR or DVD Recorder for Playback DVD recorderConnecting a VCR or DVD Recorder for Recording Satellite, cable, set-top box, etc Step Connecting a CD PlayerCD player Turntable without a Built-in Phono Preamp Connecting a TurntablePhono preamp Connecting a Cassette, CDR, MiniDisc, or DAT Recorder Remote Control Connecting ComponentsAuto Power On/Standby Direct ChangeConnecting the Power Cord Connecting the Power Cords of Other ComponentsConnecting the RS232 Port Standby indicator lights upTurning On and Standby Do the speaker setup-this is essentialTurning On the AV Receiver Smooth Operation in a Few Easy StepsSpeaker Setup menu appears First Time SetupSpeaker Setup Main menu appears onscreenCrossover First Time SetupSubwoofer Mode Speaker DistanceTest tone from each Repeat so that the volumeSpeaker Level Calibration Speaker is the sameInput selector Default assignment Component Video SetupLowed by the Setup button Press the Receiver button, folInput, and then press Enter Digital Audio Input SetupButtons to select 2. Digital Digital Input menu appearsChanging the Input Display Playing Your AV Components Select a listening mode and enjoySee Using the Listening Modes on Basic AV Receiver OperationListening to AM/FM Stations Tuning into AM/FM Radio StationsListening to the Radio Displaying AM/FM Radio InformationListening to XM Satellite Radio Connecting the XM AntennaListening to the Radio Signing Up for XM Satellite RadioSelecting XM Radio Channels Channel Search modeChannels cannot be selected while Indicator Use the Up and Down Buttons to select a channelNel Displaying XM Radio InformationButtons to select a chan Displaying XM Information on Your TVPositioning the XM Antenna XM Radio MessagesDeleting Presets Presetting AM/FM StationsSelecting Presets XM ChannelsMultichannel DVD Input Settings Using the Multichannel DVD InputUsing the Multichannel DVD Input Subwoofer SensitivityCommon Functions Adjusting Speaker LevelsSetting the Display Brightness Muting the AV ReceiverCommon Functions Using the Sleep TimerUsing Headphones Displaying Source InformationSelecting the Listening Modes Using the Listening ModesSelecting with the Remote Controller Selecting on the AV ReceiverUsing the Listening Modes DSPAbout the Listening Modes Use this mode with any stereo or TV, DVD, VHSUse this mode with any stereo movie e.g., TV, DVD, VHS Onkyo Original DSP ModesRecording Audio and Video from Separate Sources RecordingRecording the Input Source About the Onscreen Setup Menus Onscreen Setup MenusSubmenu Main menu Using the Cine Filter Function Adjusting the Listening ModesAudio Adjust Menu Adjust, and then press EnterPL II and Neo6 Settings PL II Music 2 ch only Adjusting the Listening ModesTone Control Settings Neo6 MusicLFE Level Setting Dolby Digital SettingsMono/Multiplex Settings MultiplexMode Preset, and then press Default Listening ModesListening Mode Preset menu Appears Use the Up and Down Buttons to select 5. ListeningInput Setup Advanced SetupDelay Volume Setup Advanced SetupIntelliVolume PreferencesLock Setup OSD Setup12V Trigger A/B/C Setup OSD PositionRemote IDs Changing the Remote Controller’s IDChanging the AV Receiver’s Remote ID That’s assigned to a digital input Digital Input Signal FormatsOpt or coax, and then press Using Only Speakers in Zone Connecting ZoneUsing Another Amp in Zone ZonePowered Zone 2 Setting Zone 2 Out SettingControlling Zone 2 with the Remote Controller Using ZoneControlling Zone 2 from the AV Receiver To adjust On the remote controller, pressZone 2 Remote Mode but Ton, and then use the LevelDelay Using the 12V Triggers in Zone 2 and the Main RoomRepeat this step as necessary for each setting 12V Trigger Setting for Each Input SourceUsing a Multiroom Kit with Zone Using a Multiroom Kit with a CabinetUsing a Multiroom Kit with Other Components Entering Remote Control Codes Controlling Other ComponentsResetting the Remote Mode Buttons Resetting the Remote ControllerRemote Control Codes for Integra Components Connected via Controlling Other ComponentsPrev CH On, Standby, TVCH +/-, TV CH + TV InputLearning Commands from Other Remote Controllers Running Macros Using MacrosMaking Macros Deleting MacrosTroubleshooting Troubleshooting Sound changes when I connect my head- phones Remote controller doesn’t workCan’t learn commands from another remote controller Can’t control other componentsGeneral SpecificationAmplifier Section Video Section

DTR-4.6 specifications

The Integra DTR-4.6 is an advanced multi-channel A/V receiver, designed to deliver an immersive audio and video experience. Renowned for its high-quality construction and cutting-edge technology, this receiver stands out in today’s competitive home theater market.

One of the main features of the DTR-4.6 is its powerful amplification system. It offers a robust 100 watts of power per channel across seven channels, ensuring that even the most demanding audio tracks are handled effortlessly. The receiver is equipped with Integra's proprietary technology which allows for dynamic power distribution, providing listeners with an impactful audio experience without distortion.

In terms of connectivity, the DTR-4.6 boasts a comprehensive range of options. It includes multiple HDMI inputs that support 4K video pass-through, allowing users to connect their latest devices effortlessly. Additionally, the receiver features various analog and digital inputs, ensuring compatibility with a wide range of audio sources, including CD players, turntables, and streaming devices.

For those who prioritize high-resolution audio, the DTR-4.6 supports several advanced formats, including Dolby Atmos and DTS:X. These immersive audio technologies allow sound to move above and around the listener, creating an unparalleled 3D sound experience that enhances movies, games, and music. Furthermore, the receiver features Advanced MultEQ XT room correction technology, which helps optimize sound quality by analyzing the room's acoustics and making real-time adjustments.

Another notable characteristic of the DTR-4.6 is its user-friendly interface. The intuitive on-screen setup and configuration guide make it easy to get started, even for those who may not be tech-savvy. The receiver comes with a convenient remote control, and users can also control it via a mobile app, adding a layer of convenience for modern homeowners.

Finally, the design of the DTR-4.6 is both sleek and functional. Its understated aesthetic, coupled with a solid build, ensures it serves as an attractive centerpiece in any home theater setup. The integration of high-quality components further solidifies its reputation as a durable and reliable choice for audiophiles and home cinema enthusiasts alike.

In conclusion, the Integra DTR-4.6 stands as a testament to the brand's commitment to audio excellence, offering a powerful combination of features, cutting-edge technology, and user-centric design that elevates the home entertainment experience to new heights.
Top Page Image Contents