Integra DTR-4.6 Recording Audio and Video from Separate Sources, Recording the Input Source

Page 55

4_Basic_En Page 55 Thursday, September 22, 2005 3:47 PM

Recording

This section explains how to record the input source and how to record audio and video from separate sources.

Notes:

•The surround sound and DSP listening modes cannot be recorded.

•Copy-protected DVDs cannot be recorded.

•Sources connected to the multichannel DVD input cannot be recorded.

•Various restrictions apply to digital recording. Refer to the manuals supplied with your digital recording equipment for more details.

•Digital input signals are output by only the digital out- puts, and analog input signals are output by only the analog outputs. There is no internal conversion from digital to analog or vice versa.

•DTS signals will be recorded as noise, so don’t attempt analog recording of DTS CDs or LDs.

Recording Audio and Video from Separate Sources

You can overdub audio onto your video recordings by simultaneously recording audio and video from two sep- arate sources. This is possible because only the audio source is switched when an audio-only input source, such as TAPE, TUNER, or CD, is selected, the video source remains the same.

In the following example, audio from the CD player con- nected to the CD IN and video from the camcorder con- nected to the VIDEO 3 IN jack are recorded by the VCR connected to the VIDEO 1 OUT jacks.

video signal audio signal

Camcorder

Recording the Input Source

Audio sources can be recorded to a recorder (e.g., cas- sette deck, CDR, MD) connected to the TAPE OUT or DIGITAL OPTICAL OUT jacks. Video sources can be recorded to a video recorder (e.g., VCR, DVD recorder) connected to the to VIDEO 1 OUT or VIDEO 2 OUT jacks. See pages 22 to 34 for hookup information.

1

Remote

controller

Use the input selector buttons to select the source that you want

to record.

See “Which Connections Should I Use?” on page 23 to see which signals can be output and recorded.

You can watch the source while record- ing. The AV receiver’s Volume control has no effect on recording.

CD player

VCR

1

Prepare the camcorder and CD player for

 

playback.

 

 

2

Prepare the VCR for recording.

 

 

3

Press the [Video 3] input selector button.

2

On your recorder, start record-

 

 

ing.

 

 

3

On the source component, start

 

 

playback.

 

 

Note:

•If you select another input source during recording, that input source will be recorded.

4

Press the [CD] input selector button.

 

This selects the CD player as the audio source but

 

leaves the camcorder as the video source.

 

 

5

Start recording on the VCR, then start

 

playback on the camcorder and CD player.

Video from the camcorder and audio from the CD player are recorded by the VCR.

55

Page 54 Page 56
Image 55
Page 54 Page 56
Contents DTR-4.6 Avis Important Safety InstructionsPower PrecautionsMake sure you have the following accessories Supplied AccessoriesSpeaker cable labels Contents Features Installing the Batteries Before Using the AV receiverUsing the Remote Controller Front Panel Getting to Know the AV ReceiverDisplay Getting to Know the AV ReceiverIR in A/B and OUT Rear PanelComponent Video in 1, 2, XM antennaFRONT, CENTER, and Surround Speakers These terminal posts are for connecting speakers in ZoneThis jack is for connecting a powered subwoofer Video 1 IN/OUT and Video 2 IN/OUTAbout the Remote Controller Modes Remote ControllerReceiver/Tape Mode Remote Controller DVD Mode CD, MD, and CDR Modes HDD Mode Enjoying Home Theater Connecting Your SpeakersConnecting Your Speakers Connecting Your SpeakersConnecting the Speaker Cables Speaker Connection PrecautionsStrip about 5/8 Attach the FM antenna, as shown Connecting AntennaConnecting the AM Loop Antenna Connecting the Indoor FM AntennaUsing a TV/FM Antenna Splitter Connecting AntennaConnecting an Outdoor FM Antenna Connecting an Outdoor AM AntennaAV Connection Color Coding Connecting Your ComponentsAbout AV Connections Optical Digital JacksVideo Connection Formats Connecting Your ComponentsConnecting Audio and Video Signals to the AV Receiver Which Connections Should I Use?Hint Connecting a TV or ProjectorVideo Connection Audio ConnectionOr the other Connecting a DVD playerHooking Up the Multichannel DVD Input DVD recorder Connecting a VCR or DVD Recorder for PlaybackConnecting a VCR or DVD Recorder for Recording Satellite, cable, set-top box, etc Step Connecting a CD PlayerCD player Turntable without a Built-in Phono Preamp Connecting a TurntablePhono preamp Connecting a Cassette, CDR, MiniDisc, or DAT Recorder Direct Change Connecting ComponentsAuto Power On/Standby Remote ControlStandby indicator lights up Connecting the Power Cords of Other ComponentsConnecting the RS232 Port Connecting the Power CordSmooth Operation in a Few Easy Steps Do the speaker setup-this is essentialTurning On the AV Receiver Turning On and StandbyMain menu appears onscreen First Time SetupSpeaker Setup Speaker Setup menu appearsSpeaker Distance First Time SetupSubwoofer Mode CrossoverSpeaker is the same Repeat so that the volumeSpeaker Level Calibration Test tone from eachPress the Receiver button, fol Component Video SetupLowed by the Setup button Input selector Default assignmentDigital Input menu appears Digital Audio Input SetupButtons to select 2. Digital Input, and then press EnterChanging the Input Display Basic AV Receiver Operation Select a listening mode and enjoySee Using the Listening Modes on Playing Your AV ComponentsDisplaying AM/FM Radio Information Tuning into AM/FM Radio StationsListening to the Radio Listening to AM/FM StationsSigning Up for XM Satellite Radio Connecting the XM AntennaListening to the Radio Listening to XM Satellite RadioUse the Up and Down Buttons to select a channel Channel Search modeChannels cannot be selected while Indicator Selecting XM Radio ChannelsDisplaying XM Information on Your TV Displaying XM Radio InformationButtons to select a chan NelXM Radio Messages Positioning the XM AntennaXM Channels Presetting AM/FM StationsSelecting Presets Deleting PresetsSubwoofer Sensitivity Using the Multichannel DVD InputUsing the Multichannel DVD Input Multichannel DVD Input SettingsMuting the AV Receiver Adjusting Speaker LevelsSetting the Display Brightness Common FunctionsDisplaying Source Information Using the Sleep TimerUsing Headphones Common FunctionsSelecting on the AV Receiver Using the Listening ModesSelecting with the Remote Controller Selecting the Listening ModesDSP Using the Listening ModesOnkyo Original DSP Modes Use this mode with any stereo or TV, DVD, VHSUse this mode with any stereo movie e.g., TV, DVD, VHS About the Listening ModesRecording Audio and Video from Separate Sources RecordingRecording the Input Source About the Onscreen Setup Menus Onscreen Setup MenusSubmenu Main menu Adjust, and then press Enter Adjusting the Listening ModesAudio Adjust Menu Using the Cine Filter FunctionNeo6 Music Adjusting the Listening ModesTone Control Settings PL II and Neo6 Settings PL II Music 2 ch onlyMultiplex Dolby Digital SettingsMono/Multiplex Settings LFE Level SettingUse the Up and Down Buttons to select 5. Listening Default Listening ModesListening Mode Preset menu Appears Mode Preset, and then pressInput Setup Advanced SetupDelay Preferences Advanced SetupIntelliVolume Volume SetupOSD Position OSD Setup12V Trigger A/B/C Setup Lock SetupRemote IDs Changing the Remote Controller’s IDChanging the AV Receiver’s Remote ID That’s assigned to a digital input Digital Input Signal FormatsOpt or coax, and then press Zone Connecting ZoneUsing Another Amp in Zone Using Only Speakers in ZoneZone 2 Out Setting Powered Zone 2 SettingControlling Zone 2 with the Remote Controller Using ZoneControlling Zone 2 from the AV Receiver Ton, and then use the Level On the remote controller, pressZone 2 Remote Mode but To adjust12V Trigger Setting for Each Input Source Using the 12V Triggers in Zone 2 and the Main RoomRepeat this step as necessary for each setting DelayUsing a Multiroom Kit with Zone Using a Multiroom Kit with a CabinetUsing a Multiroom Kit with Other Components Controlling Other Components Entering Remote Control CodesControlling Other Components Resetting the Remote ControllerRemote Control Codes for Integra Components Connected via Resetting the Remote Mode ButtonsTV Input On, Standby, TVCH +/-, TV CH + Prev CHLearning Commands from Other Remote Controllers Deleting Macros Using MacrosMaking Macros Running MacrosTroubleshooting Troubleshooting Can’t control other components Remote controller doesn’t workCan’t learn commands from another remote controller Sound changes when I connect my head- phonesVideo Section SpecificationAmplifier Section General

DTR-4.6 specifications

The Integra DTR-4.6 is an advanced multi-channel A/V receiver, designed to deliver an immersive audio and video experience. Renowned for its high-quality construction and cutting-edge technology, this receiver stands out in today’s competitive home theater market.

One of the main features of the DTR-4.6 is its powerful amplification system. It offers a robust 100 watts of power per channel across seven channels, ensuring that even the most demanding audio tracks are handled effortlessly. The receiver is equipped with Integra's proprietary technology which allows for dynamic power distribution, providing listeners with an impactful audio experience without distortion.

In terms of connectivity, the DTR-4.6 boasts a comprehensive range of options. It includes multiple HDMI inputs that support 4K video pass-through, allowing users to connect their latest devices effortlessly. Additionally, the receiver features various analog and digital inputs, ensuring compatibility with a wide range of audio sources, including CD players, turntables, and streaming devices.

For those who prioritize high-resolution audio, the DTR-4.6 supports several advanced formats, including Dolby Atmos and DTS:X. These immersive audio technologies allow sound to move above and around the listener, creating an unparalleled 3D sound experience that enhances movies, games, and music. Furthermore, the receiver features Advanced MultEQ XT room correction technology, which helps optimize sound quality by analyzing the room's acoustics and making real-time adjustments.

Another notable characteristic of the DTR-4.6 is its user-friendly interface. The intuitive on-screen setup and configuration guide make it easy to get started, even for those who may not be tech-savvy. The receiver comes with a convenient remote control, and users can also control it via a mobile app, adding a layer of convenience for modern homeowners.

Finally, the design of the DTR-4.6 is both sleek and functional. Its understated aesthetic, coupled with a solid build, ensures it serves as an attractive centerpiece in any home theater setup. The integration of high-quality components further solidifies its reputation as a durable and reliable choice for audiophiles and home cinema enthusiasts alike.

In conclusion, the Integra DTR-4.6 stands as a testament to the brand's commitment to audio excellence, offering a powerful combination of features, cutting-edge technology, and user-centric design that elevates the home entertainment experience to new heights.
Top Page Image Contents