Integra DTR-5.2 appendix Other component, Ir Out

Page 15

Operating components not reached by the remote controller signals (IR IN/OUT)

The following equipment (sold separately) is essential for operation:

Onkyo’s Multi-Room System kits (IR Remote Controller Extension System), or

Multiroom A/V distribution and control systems from Niles® and Xantech® to name a few

Xantech is a registered trademark of Xantech Corporation.

Niles is a registered trademark of Niles Audio Corporation.

If the remote controller signal does not reach other components

In this situation, you will need to use a commercially available IR emitter. Connect the IR emitter to the IR OUT terminal on the DTR-

5.2and then place the IR emitter on the remote sensor of the component or facing it. When the IR emitter is connected, only the signal input to the IR IN terminal is output to the IR OUT terminal. The signal input from the remote sensor on the front of the DTR-5.2 will not be output to the IR OUT terminal.

If the remote controller signal does not reach the DTR-5.2 remote sensor

If the DTR-5.2 is located inside a cabinet or other enclosure where the infrared rays from the remote controller cannnot enter, then operation with the remote controller will noe be possible. In such a case, it will be necessary to install a remote sensor at a location outside of the cabinet for the infrared rays from the controller to reach.

Connecting

IR Receiver

block

 

IR IN

DTR-5.2

IR OUT

IR Emitter

IR IN

DTR-5.2

Connecting block

IR Receiver

Remote Controller

other component

In the cabinet

: Signal flow

In the cabinet

Remote Controller

other component

: Signal flow

Remote control

: Signal folw

Make connection as shown below. Do not plug the equipment into the power source until the connection is complete.

Mini plug cable

From the connecting block

 

 

 

R

 

IR

RS 232

IN

 

 

OUT

DTR-5.2

DTR-5.2

 

sensor

R

 

 

 

IR

 

RS 232

IN

 

 

 

 

OUT

Mini plug cable

 

 

IR Emitter

15

Image 15
Contents DTR-5.2 Avis Important SafeguardsPrecautions Supplied accessories FeaturesBefore using this unit Installing the remote controller batteriesUsing the remote controller Front panel display Sleep indicatorFront panel facilities Front panelFront panel facilities Remote controller Remote controller Coax Coaxial OPT Optical No setting ConnectionsAC Inlet Connections Connecting your audio componentsConnecting a turntable Phono Connecting a compact disc player CDConnecting a video cassette recorder Video Connecting your video componentsFlow of the video signals is as follows Connecting a DVD player DVDConnecting a television monitor or projector Power cord supplied To an AC wall outlet12V Trigger terminal Direct change function Power on/ready functionPower off function Connect to devices with z terminalsIR OUT Other componentConnecting a subwoofer Connecting speakersStandard speaker placement Connecting the speaker cableConnecting speakers Connecting speakersConnecting the power Assembling the AM loop antenna Connecting antennasConnecting the AM antenna cable Connecting the included antennasDirectional linkage Connecting antennasConnecting an FM outdoor antenna Connecting an AM outdoor antennaSpeaker setup Speaker ConfigurationReturn Setup Enter Speaker setup Speaker DistanceLevel Calibration FM AM Listening to a stereo radio station FM modeTuning into a radio station Listening to Radio BroadcastsPresetting a radio station Selecting a preset radio station Erasing a preset radio stationListening to Radio Broadcasts Selecting a listening mode Enjoying music or videos with the DTR-5.2Basic operation Enjoying music or videos with the DTR-5.2 Changing the audio mode Temporarily changing the speaker output levelsEnjoying the multichannel input Listening modes Using listening modeListening Mode Preset Input SetupAudio Setup Audio Setup procedureInput Setup Controller to set 12V Trigger IntelliVolume12V Trigger Turn the jog dial or pressPreference Volume SetupHeadphones Level Late Night SetupRecording an audio source RecordingPress the desired operation button Using remote controllerCalling up a preset radio station Controlling an Integra/Onkyo cassette tape deckControlling an Integra/Onkyo CD player Using remote controllerPress the CD Mode button Disc Stdby CD ModeControlling an Integra/Onkyo DVD player Press the DVD Mode buttonREC/R Record SAT, CABLE, VCR, and TV Mode buttonsPress the MD Mode button Controlling an Integra/Onkyo MD recorderLearning a pre-programming code When entering the code of Integra/Onkyo DVD playersSEND/LEARN indicator Learning a pre-programming codePre-programmong codes Learning a pre-programming codeCable Mode Cable Mode Operating your programmed remote controllerDVD Mode DVD Player Mode SAT Mode Satellite Tuner ModePress the VCR Mode button Operating your programmed remote controllerVCR Mode VCR Mode TV Mode TV ModeLight Programming procedureMode Direct Mode Macro SEND/LEARNPage SEND/LEARN indicator Mode buttons Erasing the programmed command from one buttonErasing all the commands programmed under a Mode button Press and release the same Mode button againRunning a Macro function Using a Macro functionPress the Mode Macro button to complete the programming Programming a Macro functionUsing a Macro function Programming the Direct Macro functionRunning a Direct Macro function Erasing a direct macro from the Direct Macro button Erasing a macro from the Mode Macro buttonPress the Mode Macro button again Direct Macro Mode buttonsOperation Erasing all commands and macros that have been programmedMacro mode programming memo Press the Enter buttonRemote Controller Tuner SectionGeneral Troubleshooting guide Troubleshooting guide Video and AudioIf one of the messages shown below appears Onkyo U.S.A. Corporation

DTR-5.2 specifications

The Integra DTR-5.2 is a notable A/V receiver that combines high-performance audio capabilities with versatile connectivity options, making it a preferred choice for home theater enthusiasts. It is designed to deliver a rich, immersive audio experience, while also supporting the latest in video technologies.

At the heart of the DTR-5.2 is its advanced audio processing capabilities. It features Dolby Atmos and DTS:X support, allowing users to experience three-dimensional soundscapes that immerse them in their favorite movies and music. With these formats, sound moves in all directions, enhancing the realism of the audio experience, especially in large home theater setups.

Another significant feature of the DTR-5.2 is its ability to decode various audio formats, including high-resolution audio from sources like Blu-ray discs and streaming services. The receiver supports formats like DSD, FLAC, and ALAC, ensuring that audiophiles can enjoy their music at the highest quality possible. The integration of technologies like zone 2 or zone 3 functionality allows for multi-room audio setups, providing flexibility in how and where music can be enjoyed in the home.

The DTR-5.2 also offers extensive connectivity options. It comes equipped with multiple HDMI inputs and one output, supporting 4K Ultra HD video and HDR (High Dynamic Range) for a stunning viewing experience. It includes features like Audio Return Channel (ARC), which simplifies the connection between the receiver and compatible TVs, streamlining the setup process.

With its user-friendly interface, the Integra DTR-5.2 allows for effortless navigation and adjustments to settings. The included remote control is intuitive, giving users quick access to settings and presets. Additionally, the receiver is compatible with various control systems, which can be particularly beneficial for sophisticated home automation setups.

In terms of build quality, the DTR-5.2 is designed to last. It features a robust chassis that minimizes interference and optimizes performance. The multi-channel amplifier can provide powerful sound, ensuring that even the most demanding audio demands are met.

Overall, the Integra DTR-5.2 stands out for its combination of cutting-edge audio technologies, user-friendly features, and robust build quality, making it a strong contender for anyone looking to elevate their home entertainment experience.