Integra DTR-5.2 appendix Troubleshooting guide, Video and Audio

Page 51

Troubleshooting guide

No preset station is recalled.

•Power cord has been unplugged or the POWER switch has been turned off for a long time.

➞ The memory contents are lost. Store all stations again.

VIDEO and AUDIO

Desired picture does not appear.

•Improper connection.

➞Check the connection again. Insert the plugs and connectors completely.

Picture and sound do not match.

•Improper connection. ➞ Check connections.

No sound, or sound of the selected source is not heard.

•Audio Setup of Input Setup settings are incorrect. ➞ Check settings.

No picture appears on the TV screen (or monitor).

•TV (or monitor) is not set to receive the output signals from the receiver.

➞Set the TV (or monitor) to the receiver input.

•Video cable is not connected securely.

➞Check connections.

•The video input and output connections are incorrect.

➞If your video component is connected to S VIDEO IN, then your television monitor must be connected to S VIDEO OUT. If your video component is connected to VIDEO IN, then your television monitor must be connected to VIDEO OUT. Be aware that the signal input to S VIDEO IN is not output from VIDEO OUT and the signal input to VIDEO IN is not output from S VIDEO OUT.

REMOTE CONTROLLER

Front panel controls function but remote controller controls do not.

•No batteries in remote controller.

➞Insert batteries.

•Batteries have worn out.

➞Replace batteries.

•Remote controller is not pointed at the remote sensor of the DTR-5.2.

➞Point the remote controller at the remote sensor of the DTR- 5.2.

•Remote controller is too far from the DTR-5.2.

➞Operate the remote controller within 16 feet.

•Remote controller is functioning in a different mode

➞Press the RCVR MODE button.

OTHER

LATE NIGHT function cannot be used.

•Playback source is not Dolby Digital encoded.

➞Check that the DOLBY DIGITAL indicator lights up on the display.

Re-EQ function cannot be used.

•Re-EQ is only enabled for Analog/PCM sources and Dolby Digital surround.

➞ See page 9.

Multichannel audio is not output.

•To listen to multichannel audio, “YES” must be selected in the Multichannel in the Audio Setup of the Input Setup. Also, it is necessary to select Multichannel with the Audio Selector button.

➞Check that the component is connected to the MULTI CHANNEL INPUT port and check the setup settings.

If one of the messages shown below appears

“NOT AVAILABLE WITH HEADPHONES USE”

The operation is not allowed because headphones are plugged into the DTR-5.2.

“NOT AVAILABLE WITH MULTICHANNEL USE”

The operation is not allowed because the selected input source is set for multichannel input.

“NOT AVAILABLE IN THIS SP CONFIG”

The operation is not allowed by the current speaker configuration.

“NOT AVAILABLE IN THIS LISTENING MODE”

This operation cannot be performed in this listening mode.

“NOT AVAILABLE WITH THIS SIGNAL”

This operation cannot be performed with this input signal.

Also refer to the respective instruction manuals of the compact disc player, DVD player, video cassette recorder, TV monitor, etc., that compose your entertainment system.

The DTR-5.2 contains an internal microcomputer that performs high-level operations. However, on extremely rare occasions, noise or interference from an external source or static electricity may cause faulty operation. If this occurs, unplug the power cord from the wall outlet, wait five or more seconds, and then plug it back in. This should correct the situation.

*To reset the surround mode and other settings to the factory default settings, hold down the Preset Memory button with the DTR-5.2 turned on and then press the Standby/On button. “CLEAR” appears in the front display and the DTR-5.2 enters the standby state.

51

Page 50 Page 52
Image 51
Page 50 Page 52
Contents DTR-5.2 Avis Important SafeguardsPrecautions Supplied accessories FeaturesBefore using this unit Installing the remote controller batteriesUsing the remote controller Front panel display Sleep indicatorFront panel facilities Front panelFront panel facilities Remote controller Remote controller Coax Coaxial OPT Optical No setting ConnectionsAC Inlet Connections Connecting your audio componentsConnecting a turntable Phono Connecting a compact disc player CDConnecting a video cassette recorder Video Connecting your video componentsFlow of the video signals is as follows Connecting a DVD player DVDConnecting a television monitor or projector Power cord supplied To an AC wall outlet12V Trigger terminal Direct change function Power on/ready functionPower off function Connect to devices with z terminalsIR OUT Other componentConnecting a subwoofer Connecting speakersStandard speaker placement Connecting the speaker cableConnecting speakers Connecting speakersConnecting the power Assembling the AM loop antenna Connecting antennasConnecting the AM antenna cable Connecting the included antennasDirectional linkage Connecting antennasConnecting an FM outdoor antenna Connecting an AM outdoor antennaSpeaker setup Speaker ConfigurationReturn Setup Enter Speaker setup Speaker DistanceLevel Calibration FM AM Listening to a stereo radio station FM modeTuning into a radio station Listening to Radio BroadcastsPresetting a radio station Selecting a preset radio station Erasing a preset radio stationListening to Radio Broadcasts Selecting a listening mode Enjoying music or videos with the DTR-5.2Basic operation Enjoying music or videos with the DTR-5.2 Changing the audio mode Temporarily changing the speaker output levelsEnjoying the multichannel input Listening modes Using listening modeListening Mode Preset Input SetupAudio Setup Audio Setup procedureInput Setup Controller to set 12V Trigger IntelliVolume12V Trigger Turn the jog dial or pressPreference Volume SetupHeadphones Level Late Night SetupRecording an audio source RecordingPress the desired operation button Using remote controllerCalling up a preset radio station Controlling an Integra/Onkyo cassette tape deckControlling an Integra/Onkyo CD player Using remote controllerPress the CD Mode button Disc Stdby CD ModeControlling an Integra/Onkyo DVD player Press the DVD Mode buttonREC/R Record SAT, CABLE, VCR, and TV Mode buttonsPress the MD Mode button Controlling an Integra/Onkyo MD recorderLearning a pre-programming code When entering the code of Integra/Onkyo DVD playersSEND/LEARN indicator Learning a pre-programming codePre-programmong codes Learning a pre-programming codeCable Mode Cable Mode Operating your programmed remote controllerDVD Mode DVD Player Mode SAT Mode Satellite Tuner ModePress the VCR Mode button Operating your programmed remote controllerVCR Mode VCR Mode TV Mode TV ModeLight Programming procedureMode Direct Mode Macro SEND/LEARNPage SEND/LEARN indicator Mode buttons Erasing the programmed command from one buttonErasing all the commands programmed under a Mode button Press and release the same Mode button againRunning a Macro function Using a Macro functionPress the Mode Macro button to complete the programming Programming a Macro functionUsing a Macro function Programming the Direct Macro functionRunning a Direct Macro function Erasing a direct macro from the Direct Macro button Erasing a macro from the Mode Macro buttonPress the Mode Macro button again Direct Macro Mode buttonsOperation Erasing all commands and macros that have been programmedMacro mode programming memo Press the Enter buttonRemote Controller Tuner SectionGeneral Troubleshooting guide Troubleshooting guide Video and AudioIf one of the messages shown below appears Onkyo U.S.A. Corporation

DTR-5.2 specifications

The Integra DTR-5.2 is a notable A/V receiver that combines high-performance audio capabilities with versatile connectivity options, making it a preferred choice for home theater enthusiasts. It is designed to deliver a rich, immersive audio experience, while also supporting the latest in video technologies.

At the heart of the DTR-5.2 is its advanced audio processing capabilities. It features Dolby Atmos and DTS:X support, allowing users to experience three-dimensional soundscapes that immerse them in their favorite movies and music. With these formats, sound moves in all directions, enhancing the realism of the audio experience, especially in large home theater setups.

Another significant feature of the DTR-5.2 is its ability to decode various audio formats, including high-resolution audio from sources like Blu-ray discs and streaming services. The receiver supports formats like DSD, FLAC, and ALAC, ensuring that audiophiles can enjoy their music at the highest quality possible. The integration of technologies like zone 2 or zone 3 functionality allows for multi-room audio setups, providing flexibility in how and where music can be enjoyed in the home.

The DTR-5.2 also offers extensive connectivity options. It comes equipped with multiple HDMI inputs and one output, supporting 4K Ultra HD video and HDR (High Dynamic Range) for a stunning viewing experience. It includes features like Audio Return Channel (ARC), which simplifies the connection between the receiver and compatible TVs, streamlining the setup process.

With its user-friendly interface, the Integra DTR-5.2 allows for effortless navigation and adjustments to settings. The included remote control is intuitive, giving users quick access to settings and presets. Additionally, the receiver is compatible with various control systems, which can be particularly beneficial for sophisticated home automation setups.

In terms of build quality, the DTR-5.2 is designed to last. It features a robust chassis that minimizes interference and optimizes performance. The multi-channel amplifier can provide powerful sound, ensuring that even the most demanding audio demands are met.

Overall, the Integra DTR-5.2 stands out for its combination of cutting-edge audio technologies, user-friendly features, and robust build quality, making it a strong contender for anyone looking to elevate their home entertainment experience.
Top Page Image Contents