Integra DTR-5.2 Using a Macro function, Programming a Macro function, Running a Macro function

Page 45

Using a Macro function

What is a Macro function?

A Macro function enables you to program a series of button operations (up to 16) on the remote controller into a single button. For example, to play a compact disc player connected to the DTR-

5.2 normally, you must perform the following steps:

1.Press the RCVR MODE button.

2.Press the ON button.

3.Press the CD (INPUT SELECTOR) button.

4.Press the CD MODE button.

5.Press the playback () button.

By using the macro function, you can perform the above five operations by only pressing two buttons.

ON

MODE MACRO

RCVR MODE CD MODE

(CD playback)

CD (INPUT

SELECTOR)

HOME THEATER CONTROLLER

RC-441M

Tips:

•If you erase or change the command of a button programmed in a macro, that operation of that button will no longer work in the macro. In this case, it will be necessary for you to reprogram the macro in order to avoid incorrect operation.

•The codes programmed into a macro will be transmitted at an interval of 0.5 seconds. However, some devices may not be able to complete one operation in 0.5 seconds and may miss the next code. In this case, after pressing one operation button, you can press the same MODE button again before pressing the next operation button to add another 0.5 seconds between the two operations.

Programming a Macro function

You can program a different macro into the MODE MACRO button for each of the eight MODE buttons. The macro is then executed by pressing the appropriate MODE button and then pressing the MODE MACRO button. For example, to program the macro described above into the CD MODE button, perform the steps given below.

1.Press and hold down the desired MODE button (in this case, the CD MODE button), press the MODE MACRO button, and then release both buttons.

When you press the CD MODE button, the SEND/LEARN indicator lights and the CD MODE button lights green. When you press the MODE MACRO button, the indicator turns off. When you release the buttons, the indicator flashes and lights again.

2.Press the operation buttons you wish to program in order (in this case, press RCVR MODE → ON → CD (INPUT SELECTOR) → CD MODE → playback () button).

When you press each button, the SEND/LEARN indicator turns off. When you release the button, the indicator lights.

3.Press the MODE MACRO button to complete the programming.

The SEND/LEARN indicator flashes twice slowly.

4.Run the macro to check to see if the macro has been properly programmed.

Notes:

•You may program up to 16 button operations into each macro function. If you try to program a 17th operation, it will be ignored, and programming is stopped.

•If no button is pressed for more than 30 seconds during the programming, the SEND/LEARN indicator flashes three times quickly, and the remote controller exits the programming mode. Resume from Step 1.

•If you perform an invalid operation during programming, the SEND/LEARN indicator flashes three times quickly, and the remote controller exits the programming mode. Resume from Step 1.

Running a Macro function

Perform the procedure below to run a macro function that you have programmed into the remote controller. After programming a macro, you should always run it at least once to make sure that it has been programmed properly.

1.Point the remote controller at the DTR-5.2 and press the CD MODE button.

2.Press the MODE MACRO, and verify that the devices operate properly.

It may take a while for the macro to finish transmitting, so be sure to continue pointing the remote controller at the device until the SEND/LEARN indicator turns off.

45

Page 44 Page 46
Image 45
Page 44 Page 46
Contents DTR-5.2 Avis Important SafeguardsPrecautions Supplied accessories FeaturesBefore using this unit Installing the remote controller batteriesUsing the remote controller Front panel facilities Sleep indicatorFront panel Front panel displayFront panel facilities Remote controller Remote controller Coax Coaxial OPT Optical No setting ConnectionsAC Inlet Connecting a turntable Phono Connecting your audio componentsConnecting a compact disc player CD ConnectionsFlow of the video signals is as follows Connecting your video componentsConnecting a DVD player DVD Connecting a video cassette recorder VideoConnecting a television monitor or projector Power cord supplied To an AC wall outlet12V Trigger terminal Power off function Power on/ready functionConnect to devices with z terminals Direct change functionIR OUT Other componentStandard speaker placement Connecting speakersConnecting the speaker cable Connecting a subwooferConnecting speakers Connecting speakersConnecting the power Connecting the AM antenna cable Connecting antennasConnecting the included antennas Assembling the AM loop antennaConnecting an FM outdoor antenna Connecting antennasConnecting an AM outdoor antenna Directional linkageSpeaker setup Speaker ConfigurationReturn Setup Enter Speaker setup Speaker DistanceLevel Calibration Tuning into a radio station Listening to a stereo radio station FM modeListening to Radio Broadcasts FM AMPresetting a radio station Selecting a preset radio station Erasing a preset radio stationListening to Radio Broadcasts Selecting a listening mode Enjoying music or videos with the DTR-5.2Basic operation Enjoying music or videos with the DTR-5.2 Changing the audio mode Temporarily changing the speaker output levelsEnjoying the multichannel input Listening modes Using listening modeAudio Setup Input SetupAudio Setup procedure Listening Mode PresetInput Setup 12V Trigger IntelliVolumeTurn the jog dial or press Controller to set 12V TriggerHeadphones Level Volume SetupLate Night Setup PreferenceRecording an audio source RecordingCalling up a preset radio station Using remote controllerControlling an Integra/Onkyo cassette tape deck Press the desired operation buttonPress the CD Mode button Using remote controllerDisc Stdby CD Mode Controlling an Integra/Onkyo CD playerControlling an Integra/Onkyo DVD player Press the DVD Mode buttonPress the MD Mode button SAT, CABLE, VCR, and TV Mode buttonsControlling an Integra/Onkyo MD recorder REC/R RecordSEND/LEARN indicator When entering the code of Integra/Onkyo DVD playersLearning a pre-programming code Learning a pre-programming codePre-programmong codes Learning a pre-programming codeDVD Mode DVD Player Mode Operating your programmed remote controllerSAT Mode Satellite Tuner Mode Cable Mode Cable ModeVCR Mode VCR Mode Operating your programmed remote controllerTV Mode TV Mode Press the VCR Mode buttonMode Direct Mode Macro Programming procedureSEND/LEARN LightPage Erasing all the commands programmed under a Mode button Erasing the programmed command from one buttonPress and release the same Mode button again SEND/LEARN indicator Mode buttonsPress the Mode Macro button to complete the programming Using a Macro functionProgramming a Macro function Running a Macro functionUsing a Macro function Programming the Direct Macro functionRunning a Direct Macro function Press the Mode Macro button again Erasing a macro from the Mode Macro buttonDirect Macro Mode buttons Erasing a direct macro from the Direct Macro buttonMacro mode programming memo Erasing all commands and macros that have been programmedPress the Enter button OperationRemote Controller Tuner SectionGeneral Troubleshooting guide Troubleshooting guide Video and AudioIf one of the messages shown below appears Onkyo U.S.A. Corporation

DTR-5.2 specifications

The Integra DTR-5.2 is a notable A/V receiver that combines high-performance audio capabilities with versatile connectivity options, making it a preferred choice for home theater enthusiasts. It is designed to deliver a rich, immersive audio experience, while also supporting the latest in video technologies.

At the heart of the DTR-5.2 is its advanced audio processing capabilities. It features Dolby Atmos and DTS:X support, allowing users to experience three-dimensional soundscapes that immerse them in their favorite movies and music. With these formats, sound moves in all directions, enhancing the realism of the audio experience, especially in large home theater setups.

Another significant feature of the DTR-5.2 is its ability to decode various audio formats, including high-resolution audio from sources like Blu-ray discs and streaming services. The receiver supports formats like DSD, FLAC, and ALAC, ensuring that audiophiles can enjoy their music at the highest quality possible. The integration of technologies like zone 2 or zone 3 functionality allows for multi-room audio setups, providing flexibility in how and where music can be enjoyed in the home.

The DTR-5.2 also offers extensive connectivity options. It comes equipped with multiple HDMI inputs and one output, supporting 4K Ultra HD video and HDR (High Dynamic Range) for a stunning viewing experience. It includes features like Audio Return Channel (ARC), which simplifies the connection between the receiver and compatible TVs, streamlining the setup process.

With its user-friendly interface, the Integra DTR-5.2 allows for effortless navigation and adjustments to settings. The included remote control is intuitive, giving users quick access to settings and presets. Additionally, the receiver is compatible with various control systems, which can be particularly beneficial for sophisticated home automation setups.

In terms of build quality, the DTR-5.2 is designed to last. It features a robust chassis that minimizes interference and optimizes performance. The multi-channel amplifier can provide powerful sound, ensuring that even the most demanding audio demands are met.

Overall, the Integra DTR-5.2 stands out for its combination of cutting-edge audio technologies, user-friendly features, and robust build quality, making it a strong contender for anyone looking to elevate their home entertainment experience.
Top Page Image Contents