Integra DTR-5.2 appendix Connecting antennas, Assembling the AM loop antenna

Page 19

Connecting antennas

To use the tuner of DTR-5.2, it is necessary to prepare the supplied FM and AM antennas.

•Adjustment and placement of the FM and AM antennas for better reception must be done while listening to a station broadcast.

•If better reception cannot be obtained, then placement of an outside antenna is recommended.

Assembling the AM loop antenna

Assemble the loop antenna as shown in the illustration.

•Refer to “Connecting the AM loop antenna” below for details on connecting the loop antenna.

Insert into the hole.

Connecting the AM antenna cable

1.Press down the lever.

2.Insert the wire into the hole.

3.Release the lever.

1

2

3

Connecting the included antennas

Connecting the FM indoor antenna:

The FM indoor antenna is for indoor use only. During use, extend the antenna and move it in various directions until the clearest signal is received. Fix it with push pins or similar implements in the position that will cause the least amount of distortion.

If the reception is not very clear with the attached FM indoor antenna, the use of an outdoor antenna is recommended.

Connecting the AM loop antenna:

The AM loop antenna is for indoor use only. Set it in the direction and position where you receive the clearest sound. Put it as far away as possible from the DTR-5.2, televisions, speaker cables, and power cords.

When reception is not satisfactory with the attached AM loop antenna alone, connection of an outdoor antenna is recommended.

(Indoor) AM loop antenna

FM antenna

ANTENNA

AM

FM 75

Strip away the insulation from the end of the cable, then fully insert the stripped end of the cable.

Hint:

Either of the split ends of the AM antenna can be connected to either terminal. Unlike speaker cabling, there is no polarity for AM broadcast signals.

19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents DTR-5.2 Avis Important SafeguardsPrecautions Supplied accessories FeaturesInstalling the remote controller batteries Before using this unitUsing the remote controller Front panel display Sleep indicatorFront panel facilities Front panelFront panel facilities Remote controller Remote controller Connections Coax Coaxial OPT Optical No settingAC Inlet Connections Connecting your audio componentsConnecting a turntable Phono Connecting a compact disc player CDConnecting a video cassette recorder Video Connecting your video componentsFlow of the video signals is as follows Connecting a DVD player DVDPower cord supplied To an AC wall outlet Connecting a television monitor or projector12V Trigger terminal Direct change function Power on/ready functionPower off function Connect to devices with z terminalsIR OUT Other componentConnecting a subwoofer Connecting speakersStandard speaker placement Connecting the speaker cableConnecting speakers Connecting speakersConnecting the power Assembling the AM loop antenna Connecting antennasConnecting the AM antenna cable Connecting the included antennasDirectional linkage Connecting antennasConnecting an FM outdoor antenna Connecting an AM outdoor antennaSpeaker Configuration Speaker setupReturn Setup Enter Speaker Distance Speaker setupLevel Calibration FM AM Listening to a stereo radio station FM modeTuning into a radio station Listening to Radio BroadcastsErasing a preset radio station Presetting a radio station Selecting a preset radio stationListening to Radio Broadcasts Enjoying music or videos with the DTR-5.2 Selecting a listening modeBasic operation Enjoying music or videos with the DTR-5.2 Temporarily changing the speaker output levels Changing the audio modeEnjoying the multichannel input Listening modes Using listening modeListening Mode Preset Input SetupAudio Setup Audio Setup procedureInput Setup Controller to set 12V Trigger IntelliVolume12V Trigger Turn the jog dial or pressPreference Volume SetupHeadphones Level Late Night SetupRecording an audio source RecordingPress the desired operation button Using remote controllerCalling up a preset radio station Controlling an Integra/Onkyo cassette tape deckControlling an Integra/Onkyo CD player Using remote controllerPress the CD Mode button Disc Stdby CD ModeControlling an Integra/Onkyo DVD player Press the DVD Mode buttonREC/R Record SAT, CABLE, VCR, and TV Mode buttonsPress the MD Mode button Controlling an Integra/Onkyo MD recorderLearning a pre-programming code When entering the code of Integra/Onkyo DVD playersSEND/LEARN indicator Learning a pre-programming codePre-programmong codes Learning a pre-programming codeCable Mode Cable Mode Operating your programmed remote controllerDVD Mode DVD Player Mode SAT Mode Satellite Tuner ModePress the VCR Mode button Operating your programmed remote controllerVCR Mode VCR Mode TV Mode TV ModeLight Programming procedureMode Direct Mode Macro SEND/LEARNPage SEND/LEARN indicator Mode buttons Erasing the programmed command from one buttonErasing all the commands programmed under a Mode button Press and release the same Mode button againRunning a Macro function Using a Macro functionPress the Mode Macro button to complete the programming Programming a Macro functionProgramming the Direct Macro function Using a Macro functionRunning a Direct Macro function Erasing a direct macro from the Direct Macro button Erasing a macro from the Mode Macro buttonPress the Mode Macro button again Direct Macro Mode buttonsOperation Erasing all commands and macros that have been programmedMacro mode programming memo Press the Enter buttonTuner Section Remote ControllerGeneral Troubleshooting guide Video and Audio Troubleshooting guideIf one of the messages shown below appears Onkyo U.S.A. Corporation

DTR-5.2 specifications

The Integra DTR-5.2 is a notable A/V receiver that combines high-performance audio capabilities with versatile connectivity options, making it a preferred choice for home theater enthusiasts. It is designed to deliver a rich, immersive audio experience, while also supporting the latest in video technologies.

At the heart of the DTR-5.2 is its advanced audio processing capabilities. It features Dolby Atmos and DTS:X support, allowing users to experience three-dimensional soundscapes that immerse them in their favorite movies and music. With these formats, sound moves in all directions, enhancing the realism of the audio experience, especially in large home theater setups.

Another significant feature of the DTR-5.2 is its ability to decode various audio formats, including high-resolution audio from sources like Blu-ray discs and streaming services. The receiver supports formats like DSD, FLAC, and ALAC, ensuring that audiophiles can enjoy their music at the highest quality possible. The integration of technologies like zone 2 or zone 3 functionality allows for multi-room audio setups, providing flexibility in how and where music can be enjoyed in the home.

The DTR-5.2 also offers extensive connectivity options. It comes equipped with multiple HDMI inputs and one output, supporting 4K Ultra HD video and HDR (High Dynamic Range) for a stunning viewing experience. It includes features like Audio Return Channel (ARC), which simplifies the connection between the receiver and compatible TVs, streamlining the setup process.

With its user-friendly interface, the Integra DTR-5.2 allows for effortless navigation and adjustments to settings. The included remote control is intuitive, giving users quick access to settings and presets. Additionally, the receiver is compatible with various control systems, which can be particularly beneficial for sophisticated home automation setups.

In terms of build quality, the DTR-5.2 is designed to last. It features a robust chassis that minimizes interference and optimizes performance. The multi-channel amplifier can provide powerful sound, ensuring that even the most demanding audio demands are met.

Overall, the Integra DTR-5.2 stands out for its combination of cutting-edge audio technologies, user-friendly features, and robust build quality, making it a strong contender for anyone looking to elevate their home entertainment experience.
Top Page Image Contents