Integra DTR-5.2 appendix Remote controller

Page 9

Remote controller

INPUT SELECTOR buttons [25]

Selects an input source.

Same as the input selector buttons on front panel of the DTR-5.2. The input source for each buttons is given here. DVD:DVD, CD:CD, V1:VIDEO1, V2:VIDEO2, V3:VIDEO3, V4:Not used with the DTR-5.2, T1:TAPE, T2:Not used with the DTR-5.2, TUN:FM/AM, PH:PHONO.

Numeric key/Listening mode selector/SP A, B/ Re-EQ/DISPLAY/DIMMER buttons

1 to 9, +10, --/---, 0: For entering the number of a track.

STEREO, DIRECT, DSP /, SURR, A.ST: You can select a listening mode. [25]

STEREO: Changes the listening mode directly to the Stereo listening mode. If pressed, the listening mode for the selected input source set in the Listening Mode Preset is also changed to the Stereo listening mode.

SURR (Surround): Changes the listening mode to the surround mode for the current input signal (e.g., Dolby Pro Logic II, Dolby Digital, or DTS). If pressed, the listening mode for the selected input source set in the Listening Mode Preset is also changed to the Surround listening mode.

For Dolby Pro Logic II, this button also changes the mode between Dolby Pro Logic II Movie and Dolby Pro Logic II Music.

DIRECT: Changes the listening mode directly to the Direct listening mode. If pressed, the listening mode for the selected input source set in the Listening Mode Preset is also changed to the Direct listening mode.

A.ST (All Channel Stereo): Changes the listening mode directly to the Stereo listening mode. If pressed, the listening mode for the selected input source set in the Listening Mode Preset is also changed to the All Channel Stereo listening mode. DSP /: Changes the listening mode as shown below.

Direct ↔ Stereo ↔ Surround ↔ Orchestra ↔ Unplugged ↔ Studio-Mix ↔ TV Logic ↔ All Ch Stereo ↔ Direct.

If pressed, the listening mode for the selected input source set in the Listening Mode Preset is also changed.

Re-EQ:Depending on the listening mode, you can turn the cinema re-equalization function on or off. [25]

Re-EQ (re-equalization) takes the edginess or “brightness” out of your home cinema sound to compensate for the fact that sound mixed for theaters may sound too bright when played back through speakers in the home environment.

On: Select to turn on the re-equalization filter.

Off: Select to turn off the re-equalization filter.

Note:

The Re-EQ function is effective on the Dolby Pro Logic II Movie and Dolby Digital modes.

SP A, SP B: For turning on and off speakers systems A and B. [26]

DISPLAY: For changing the display in the front display. [26]

DIMMER: Adjusts the display brightness.

There are three settings available: normal, dark and very dark.

LIGHT button

For illuminating the buttons of the remote controller.

This is button is useful when using the remote controller in dark locations. When pressed, the buttons on the remote controller light green.

The button for the mode currently selected lights brighter than the rest.

MODE MACRO button [45]

For executing and programming the Macro function.

SETUP button [21, 22, 29-32]

Press to enter and exit the setup mode.

ENTER/cursor button [21, 22, 29-32]

For selecting and entering settings in the setup mode.

VOL button

For adjusting the volume.

TEST/MENU button

TEST: Outputs a test tone for setting speaker levels.

Use this button in conjunction with the LEVEL / and CH SEL buttons to calibrate the speakers levels.

1.Press the TEST button.

A test sound (pink noise) will be heard from the left front speaker. At this point, it is not necessary to adjust the volume of the test sound.

2.Press the CH SEL button.

The test sound will now be heard from a different speaker.

3.Use the LEVEL / buttons to adjust the volume of the test sound from this speaker to the same level that you heard from the previous speaker.

4.Repeat the procedure in step 2 and 3 until the volume of the test sound from all speakers is the same level.

Each time you press the CH SEL button, the test sound will be

heard from a different speaker. The speaker order for calibration is front left → center → front right → surround right → surround left → subwoofer.

5.Press the TEST button to exit the setting.

For a more detailed explanation of how to calibrate the speaker levels, see page 22.

MENU: When in the DVD mode, this button displays the DVD menu.

MUTING/M button [26]

Activates the mute function.

ZONE 2/SEARCH/ENTER button

ZONE 2: Not used with the DTR-5.2.

SEARCH: When in the DVD mode, for finding the specific section on a disc where you want to start playback.

ENTER: When in the MD mode, for confirming the selection.

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents DTR-5.2 Avis Important SafeguardsPrecautions Supplied accessories FeaturesBefore using this unit Installing the remote controller batteriesUsing the remote controller Front panel facilities Sleep indicatorFront panel Front panel displayFront panel facilities Remote controller Remote controller Coax Coaxial OPT Optical No setting ConnectionsAC Inlet Connecting a turntable Phono Connecting your audio componentsConnecting a compact disc player CD ConnectionsFlow of the video signals is as follows Connecting your video componentsConnecting a DVD player DVD Connecting a video cassette recorder VideoConnecting a television monitor or projector Power cord supplied To an AC wall outlet12V Trigger terminal Power off function Power on/ready functionConnect to devices with z terminals Direct change functionIR OUT Other componentStandard speaker placement Connecting speakersConnecting the speaker cable Connecting a subwooferConnecting speakers Connecting speakersConnecting the power Connecting the AM antenna cable Connecting antennasConnecting the included antennas Assembling the AM loop antennaConnecting an FM outdoor antenna Connecting antennasConnecting an AM outdoor antenna Directional linkageSpeaker setup Speaker ConfigurationReturn Setup Enter Speaker setup Speaker DistanceLevel Calibration Tuning into a radio station Listening to a stereo radio station FM modeListening to Radio Broadcasts FM AMPresetting a radio station Selecting a preset radio station Erasing a preset radio stationListening to Radio Broadcasts Selecting a listening mode Enjoying music or videos with the DTR-5.2Basic operation Enjoying music or videos with the DTR-5.2 Changing the audio mode Temporarily changing the speaker output levelsEnjoying the multichannel input Listening modes Using listening modeAudio Setup Input SetupAudio Setup procedure Listening Mode PresetInput Setup 12V Trigger IntelliVolumeTurn the jog dial or press Controller to set 12V TriggerHeadphones Level Volume SetupLate Night Setup PreferenceRecording an audio source RecordingCalling up a preset radio station Using remote controllerControlling an Integra/Onkyo cassette tape deck Press the desired operation buttonPress the CD Mode button Using remote controllerDisc Stdby CD Mode Controlling an Integra/Onkyo CD playerControlling an Integra/Onkyo DVD player Press the DVD Mode buttonPress the MD Mode button SAT, CABLE, VCR, and TV Mode buttonsControlling an Integra/Onkyo MD recorder REC/R RecordSEND/LEARN indicator When entering the code of Integra/Onkyo DVD playersLearning a pre-programming code Learning a pre-programming codePre-programmong codes Learning a pre-programming codeDVD Mode DVD Player Mode Operating your programmed remote controllerSAT Mode Satellite Tuner Mode Cable Mode Cable ModeVCR Mode VCR Mode Operating your programmed remote controllerTV Mode TV Mode Press the VCR Mode buttonMode Direct Mode Macro Programming procedureSEND/LEARN LightPage Erasing all the commands programmed under a Mode button Erasing the programmed command from one buttonPress and release the same Mode button again SEND/LEARN indicator Mode buttonsPress the Mode Macro button to complete the programming Using a Macro functionProgramming a Macro function Running a Macro functionUsing a Macro function Programming the Direct Macro functionRunning a Direct Macro function Press the Mode Macro button again Erasing a macro from the Mode Macro buttonDirect Macro Mode buttons Erasing a direct macro from the Direct Macro buttonMacro mode programming memo Erasing all commands and macros that have been programmedPress the Enter button OperationRemote Controller Tuner SectionGeneral Troubleshooting guide Troubleshooting guide Video and AudioIf one of the messages shown below appears Onkyo U.S.A. Corporation

DTR-5.2 specifications

The Integra DTR-5.2 is a notable A/V receiver that combines high-performance audio capabilities with versatile connectivity options, making it a preferred choice for home theater enthusiasts. It is designed to deliver a rich, immersive audio experience, while also supporting the latest in video technologies.

At the heart of the DTR-5.2 is its advanced audio processing capabilities. It features Dolby Atmos and DTS:X support, allowing users to experience three-dimensional soundscapes that immerse them in their favorite movies and music. With these formats, sound moves in all directions, enhancing the realism of the audio experience, especially in large home theater setups.

Another significant feature of the DTR-5.2 is its ability to decode various audio formats, including high-resolution audio from sources like Blu-ray discs and streaming services. The receiver supports formats like DSD, FLAC, and ALAC, ensuring that audiophiles can enjoy their music at the highest quality possible. The integration of technologies like zone 2 or zone 3 functionality allows for multi-room audio setups, providing flexibility in how and where music can be enjoyed in the home.

The DTR-5.2 also offers extensive connectivity options. It comes equipped with multiple HDMI inputs and one output, supporting 4K Ultra HD video and HDR (High Dynamic Range) for a stunning viewing experience. It includes features like Audio Return Channel (ARC), which simplifies the connection between the receiver and compatible TVs, streamlining the setup process.

With its user-friendly interface, the Integra DTR-5.2 allows for effortless navigation and adjustments to settings. The included remote control is intuitive, giving users quick access to settings and presets. Additionally, the receiver is compatible with various control systems, which can be particularly beneficial for sophisticated home automation setups.

In terms of build quality, the DTR-5.2 is designed to last. It features a robust chassis that minimizes interference and optimizes performance. The multi-channel amplifier can provide powerful sound, ensuring that even the most demanding audio demands are met.

Overall, the Integra DTR-5.2 stands out for its combination of cutting-edge audio technologies, user-friendly features, and robust build quality, making it a strong contender for anyone looking to elevate their home entertainment experience.
Top Page Image Contents