Integra DTR-5.2 appendix Input Setup, Audio Setup procedure, Listening Mode Preset

Page 29

Input Setup

2. Input Setup

These settings can be set differently for each input source.

Audio Setup

Digital Input (D. INPUT): This setting tells the DTR-5.2 which input source button on the front panel is connected with which digital input jack on the rear panel.

If you have connected your components in accordance with the default settings (given in the table below), then there is no need to change this setting.

Multichannel (MULTICH): This setting will not appear if AM or FM is selected at the front panel for the input source. The initial settings are “YES” for the DVD input source and “NO” for all other input sources. This setting is normally set to “NO,” and only needs to be changed to “YES” if a DVD player, MPEG decoder, or other component that has a multi channel port is connected to the MULTI CHANNEL INPUT port for 5.1-channel audio.

2.Press the Setup (SETUP) button.

Turn the jog dial or press the and cursor buttons on the remote controller to display “2. INPUT SETUP.”

3.Press the jog dial or ENTER button on the remote controller.

“AUDIO SETUP?” appears in the front display.

4.Press the jog dial or ENTER button on the remote controller.

The name of the digital input currently assigned to the selected input source appears.

Setup

DSP/Mode ADJ

Push To Enter

DSP/Mode ADJ

Push To Enter

DSP/Mode ADJ

Push To Enter

Default setting

Input source

Digital input

 

Multichannel

DVD

COAX 1

 

YES

 

 

 

 

VIDEO 1

COAX 2

 

NO

VIDEO 2

----

 

NO

 

 

 

 

VIDEO 3

OPT 2

 

NO

 

 

 

 

TAPE

----

 

NO

FM

 

 

 

 

 

 

 

AM

 

 

 

 

 

 

 

PHONO

----

 

NO

CD

OPT 1

 

NO

 

 

 

 

----: No setting

: Not applicable

 

OPT1: Select if connected to DIGITAL INPUT (OPTICAL) 1.

OPT2: Select if connected to DIGITAL INPUT (OPTICAL) 2.

COAX1: Select if connected to DIGITAL INPUT (COAXIAL) 1.

COAX2: Select if connected to DIGITAL INPUT (COAXIAL) 2.

5.Turn the jog dial or press the or cursor button on the remote controller to select the digital input.

(Example: If connected to COAX 1.)

6.Press either the jog dial or the cursor button on the remote controller.

“MULTICH=YES” or “NO” appears.

If a component with a 5.1-channel output terminal is connected (i.e., DVD player or MPEG decoder), turn the jog dial or press the and buttons on the remote controller to select “YES.”

DSP/Mode ADJ

Push To Enter

DSP/Mode ADJ

Push To Enter

DSP/Mode ADJ

Push To Enter

----:Select if the input source is not from a digital input jack.

Notes:

•Do not assign a digital input to more than one input source. If you are making a digital connection that requires you to change the default settings, be sure to always first cancel the current digital input setting and then assign the new setting.

•When playing a device that is actually connected to the MULTI CHANNEL INPUT terminal, select MULTICH with the Audio Selector button (see page 27).

Audio Setup procedure

1. Select the desired input source.

DTR-5.2

DVD

 

Video 1

Video 2

Video 3

Tape

FM

AM

Phono

C D

 

 

 

 

 

 

 

 

 

 

 

 

VCR

Remote controller

7. Press the Return (RETURN) button.

Return

 

“AUDIO SETUP?” appears in the front

 

display.

 

To exit the setup mode immediately, press

Setup

the Setup (SETUP) button.

 

Listening Mode Preset

With the DTR-5.2, you can set a different listening mode for each different signal type that comes from each input source.

For example, with the default settings, even when using the same DVD player, if a CD is played, the listening mode automatically becomes “STEREO,” and if a DVD is played (Dolby Digital 3/2.1), the listening mode automatically becomes Dolby D.

Analog/PCM Source: Set a listening mode for the input signal from

2-channel analog sources and PCM source (default: STEREO.)

Note:

For PCM sources recorded at a sampling rate of 96 kHz or greater, only the Stereo or Direct listening modes can be selected. However, the set listening mode is stored in memory.

Digital format Source: Set a listening mode for the input signal

from digital sources (default: SURROUND).

29

Page 28 Page 30
Image 29
Page 28 Page 30
Contents DTR-5.2 Avis Important SafeguardsPrecautions Supplied accessories FeaturesUsing the remote controller Before using this unitInstalling the remote controller batteries Front panel facilities Sleep indicatorFront panel Front panel displayFront panel facilities Remote controller Remote controller AC Inlet Coax Coaxial OPT Optical No settingConnections Connecting a turntable Phono Connecting your audio componentsConnecting a compact disc player CD ConnectionsFlow of the video signals is as follows Connecting your video componentsConnecting a DVD player DVD Connecting a video cassette recorder Video12V Trigger terminal Connecting a television monitor or projectorPower cord supplied To an AC wall outlet Power off function Power on/ready functionConnect to devices with z terminals Direct change functionIR OUT Other componentStandard speaker placement Connecting speakersConnecting the speaker cable Connecting a subwooferConnecting speakers Connecting speakersConnecting the power Connecting the AM antenna cable Connecting antennasConnecting the included antennas Assembling the AM loop antennaConnecting an FM outdoor antenna Connecting antennasConnecting an AM outdoor antenna Directional linkageReturn Setup Enter Speaker setupSpeaker Configuration Level Calibration Speaker setupSpeaker Distance Tuning into a radio station Listening to a stereo radio station FM modeListening to Radio Broadcasts FM AMListening to Radio Broadcasts Presetting a radio station Selecting a preset radio stationErasing a preset radio station Basic operation Selecting a listening modeEnjoying music or videos with the DTR-5.2 Enjoying music or videos with the DTR-5.2 Enjoying the multichannel input Changing the audio modeTemporarily changing the speaker output levels Listening modes Using listening modeAudio Setup Input SetupAudio Setup procedure Listening Mode PresetInput Setup 12V Trigger IntelliVolumeTurn the jog dial or press Controller to set 12V TriggerHeadphones Level Volume SetupLate Night Setup PreferenceRecording an audio source RecordingCalling up a preset radio station Using remote controllerControlling an Integra/Onkyo cassette tape deck Press the desired operation buttonPress the CD Mode button Using remote controllerDisc Stdby CD Mode Controlling an Integra/Onkyo CD playerControlling an Integra/Onkyo DVD player Press the DVD Mode buttonPress the MD Mode button SAT, CABLE, VCR, and TV Mode buttonsControlling an Integra/Onkyo MD recorder REC/R RecordSEND/LEARN indicator When entering the code of Integra/Onkyo DVD playersLearning a pre-programming code Learning a pre-programming codePre-programmong codes Learning a pre-programming codeDVD Mode DVD Player Mode Operating your programmed remote controllerSAT Mode Satellite Tuner Mode Cable Mode Cable ModeVCR Mode VCR Mode Operating your programmed remote controllerTV Mode TV Mode Press the VCR Mode buttonMode Direct Mode Macro Programming procedureSEND/LEARN LightPage Erasing all the commands programmed under a Mode button Erasing the programmed command from one buttonPress and release the same Mode button again SEND/LEARN indicator Mode buttonsPress the Mode Macro button to complete the programming Using a Macro functionProgramming a Macro function Running a Macro functionRunning a Direct Macro function Using a Macro functionProgramming the Direct Macro function Press the Mode Macro button again Erasing a macro from the Mode Macro buttonDirect Macro Mode buttons Erasing a direct macro from the Direct Macro buttonMacro mode programming memo Erasing all commands and macros that have been programmedPress the Enter button OperationGeneral Remote ControllerTuner Section Troubleshooting guide If one of the messages shown below appears Troubleshooting guideVideo and Audio Onkyo U.S.A. Corporation

DTR-5.2 specifications

The Integra DTR-5.2 is a notable A/V receiver that combines high-performance audio capabilities with versatile connectivity options, making it a preferred choice for home theater enthusiasts. It is designed to deliver a rich, immersive audio experience, while also supporting the latest in video technologies.

At the heart of the DTR-5.2 is its advanced audio processing capabilities. It features Dolby Atmos and DTS:X support, allowing users to experience three-dimensional soundscapes that immerse them in their favorite movies and music. With these formats, sound moves in all directions, enhancing the realism of the audio experience, especially in large home theater setups.

Another significant feature of the DTR-5.2 is its ability to decode various audio formats, including high-resolution audio from sources like Blu-ray discs and streaming services. The receiver supports formats like DSD, FLAC, and ALAC, ensuring that audiophiles can enjoy their music at the highest quality possible. The integration of technologies like zone 2 or zone 3 functionality allows for multi-room audio setups, providing flexibility in how and where music can be enjoyed in the home.

The DTR-5.2 also offers extensive connectivity options. It comes equipped with multiple HDMI inputs and one output, supporting 4K Ultra HD video and HDR (High Dynamic Range) for a stunning viewing experience. It includes features like Audio Return Channel (ARC), which simplifies the connection between the receiver and compatible TVs, streamlining the setup process.

With its user-friendly interface, the Integra DTR-5.2 allows for effortless navigation and adjustments to settings. The included remote control is intuitive, giving users quick access to settings and presets. Additionally, the receiver is compatible with various control systems, which can be particularly beneficial for sophisticated home automation setups.

In terms of build quality, the DTR-5.2 is designed to last. It features a robust chassis that minimizes interference and optimizes performance. The multi-channel amplifier can provide powerful sound, ensuring that even the most demanding audio demands are met.

Overall, the Integra DTR-5.2 stands out for its combination of cutting-edge audio technologies, user-friendly features, and robust build quality, making it a strong contender for anyone looking to elevate their home entertainment experience.
Top Page Image Contents