WhisperKool SS4000, SS7000 owner manual Features & Benefits, Humidity Control, Quiet Operation

Page 4

FEATURES & BENEFITS

Designed specifically for wine storage, the WhisperKOOL system is a specialized refrigeration unit designed for one purpose only: to maintain the optimal temperature and humidity levels conducive to the proper aging of fine wines.

Humidity Control

As the temperature begins to drop within the cellar, the relative humidity will rise. The WhisperKOOL units do not create humidity. If you live in a dry area of the country, you may need to add humidity in the wine cellar. This can be done by introducing a non-heat humidifier or installing a small fountain within the cellar. The WhisperKOOL will remove excess humidity from the air and discharge it through the drain line hookup on the evaporator unit.

Quiet Operation

Years of experience with our self contained cooling units has resulted in a totally new design which accounts for a number of environmental conditions unique to wine cellars. We have accounted for these variables and incorporated the use of state of the art components which offer quiet and sophisticated operations while keeping the basic concept rather simple.

Condensing Unit Installation, Indoors or Outdoors

This system offers the option of installing the condensing unit indoors or outdoors. This will allow home builders and architects to incorporate this system with the utmost ease with regard to installation and space requirements. Note: Exterior installations require a condensing unit housing. Please specify the need of this requirement at the time of order.

Temperature Differential

The WhisperKOOL split system is designed to operate effectively when the condensing unit (outdoor section) is running in an ambient temperature of up to 125 degrees. At this extreme condition, the system is able to maintain a 70 degree differential between the Wine Cellar temperature at 55 degrees and the 125 degree ambient temperature. This is a significant improvement over most cooling units designed for wine storage.

-4-

Image 4
Contents WhisperKOOL Page Table of Contents Features & Benefits Condensing Unit Installation, Indoors or OutdoorsTemperature Differential Humidity ControlThermostat Additional FeaturesEvaporator PDT Operating Instructions PDTPackage Contents Preparing the Wine Cellar Technical Specifications Wine Cellar / Space PreparationSplit System Installation Guidelines General Installation Guidelines and InstructionsInstalling Condensing Unit Mounting Evaporator UnitCondensing Unit Skid Preparation Condensing UnitHead Pressure Control, Low Ambient Control Switch Mounting the Evaporator Unit Remove interior assemblyDisassemble evaporator unit Mounting housing to wall Identify and remove appropriate knockoutsInstalling refrigeration lines into evaporator housing Re-install interior assembly Attaching refrigeration lines Install drain line fitting and drain line FanF1 J1 T3 J1 S1 S2 Thermostat Solenoid ValveInstall thermostat Install front cover Energize unitSplit System Wiring Schematic Wiring SystemRefrigeration Lines Split Unit Wiring Diagram Maintenance How To Contact Vinothèque Customer Service Technical AssistanceTroubleshooting Fault Cause SolutionWine cellar temperature above thermostat set point Water leaking from unitCompressor runs intermittently And/or cause for hot air recirculationCheck refrigerant sight glass in 1/4 tubing Evaporator blower runs, but compressor does notCompressor runs, but evaporator does not Evaporator coil freezesHumidity in cellar too high Installation Terms and Conditions Acceptance of Terms & Conditions Product InstallationMaintenance Customer Service Arbitration Questions or Additional Information Page Page