PDT OPERATING INSTRUCTIONS
The unit is set at 55°F at the factory. To raise or lower the temperature set point, press the set button while at the same time pressing either the arrow up or arrow down button.
1WINE Temperature Indicator
Wine Temperature Reading | 3 | 2 LED Screen |
|
|
WINE 55F ON
SET
PDT
Precision digital Technology Thermostat
Temperature
SET
4 | Temperature SET Indicator | 7 UP Arrow Button | 8 DOWN Arrow Button |
5 | Unit ON Indicator | 6 SET Temperature Button |
|
1.Wine Temperature Indicator: A red LED bar will light up when the thermostat is reading the liquid temperature in the bottle via the probe. This will remain lit and the temperature you see displayed is what the probe is reading.
2.LED Screen: Displays your thermostat readings.
3.Wine Temperature Reading: The temperature the water bottle is registering to the thermostat.
4.Temperature SET Indicator: A red LED bar will light up when you are setting the temperature.
5.Unit ON Indicator: A red LED bar will light up every time the unit turns on to run a cooling cycle.
6.SET Button: Used to set the temperature you want the unit to maintain.
7.UP Arrow Button: Used with the SET button to set temperature higher. In addition, by pressing and holding the button it will allow you to see the
8.DOWN Arrow Button: Used with the SET button to set temperature lower.
*Up and Down Arrow Buttons used simultaneously will change the temperature read out from Fahrenheit to Celsius*