Windsor SCX364, 10052410 manual Technical Specifications, Dimension/Capacity

Page 8

TECHNICAL SPECIFICATIONS

ITEM

DIMENSION/CAPACITY

Nominal power

1440 Watts

Rated Voltage

24VDC

Rated Amperage

60 Amps

 

4 X 6 Volt 250-305-335AH @ 20 hr

Batteries

rate

Scrub Brush Motors

.33 hp (0.25 Kw)

Vacuum Motor

.75 hp (0.56 Kw)

Propelling Motor

.3 hp (0.22 Kw)

Mass (GVW)

956 pounds (433 kg)

Weight empty without batteries

395 pounds (179 kg)

 

Gravity feed, fully variable with

Solution Control

automatic shut-off in neutral

Solution tank capacity

23 gal. (87 l)

Recovery tank capacity

25 gal. (95 l)

Scrub brush diameter for 36 in. (90 cm) scrub head

12 in (30.0 cm)

 

Actuated 0 lbs to 150 lbs (0 kg to 68

Scrub brush pressure

kg)

Scrub brush speed

165 rpm

 

2 x 10 in (25.4 cm) non-marking

Tires

foam-filled

 

2 X 4 in (10.2 cm) polyurethane solid

Casters

non-marking

Foundation Pressure (at recommended tire psi)

48 psi

Maximum Speed

3.2 Miles/hour (5.2 km/hour)

Coverage with 36 in. (90 cm) scrub head

277 sq. ft/min

 

Steel plate with epoxy powdercoat

Frame Construction

finish.

Brakes (optional)

Tire lock parking brake.

Minimum aisle u-turn width with 36 in. (90 cm) scrub head

73” (185 cm)

Maximum rated climb and descent angle with empty tanks and

 

without optional parking brake

2%

Maximum rated climb and descent angle with full tanks and

 

without optional parking brake

2%

* Cleaning rate results will vary depending on floor type, building structure, etc.

3-1

SCX364 86037150 1/17/07

Image 8
Contents Walk Behind Scrubber Overview Machine Data LOG/OVERVIEWYour Dealer Table of Contents HOW to USE this Manual ModelImportant Safety Instructions Read ALL Instructions Before Using this MachineHazard Intensity Level Hazard Intensity LevelSafety Label Location Technical Specifications DIMENSION/CAPACITYSpecial Notes MeasureHOW the Machine Works Components Controls KEY Switch Emergency SHUT-OFF SwitchBrush Switch Propel Control LeversSolution Control Knob Vacuum SwitchSqueegee Pitch Adjustment Knob Squeegee Deflection Adjustment KnobsHour Meter Brush Pressure IndicatorParking Brake Optional Emergency Stop Procedures Filling Solution TankMachine Operation PRE-RUN Machine InspectionTo Stop Scrubbing Normal ScrubbingTo Begin Scrubbing Emptying and Cleaning Tanks Solution TankRecovery Tank Double ScrubService Schedule MaintenanceMaintenance Daily Weekly Monthly HRSMaintenance Battery Maintenance BatteriesTo Charge the Batteries Battery ConditionChecking Gravity Changing Batteries Front of MachineAdjusting Squeegee To Remove Squeegee AssemblyRear Squeegee To Replace or Rotate Rear Squeegee BladeTo Adjust Squeegee Pitch To Adjust Amount of Rear Squeegee DeflectionReplacing or Installing Scrub Brushes Recovery Tank Float SHUT-OFFScrub Brushes Uncoated FloorsSolution Strainer Brush Motor Carbon Brush ReplacementBrush Motor Changing Brush MotorsTraction Motor Carbon Brush Replacement Traction MotorCircuit Breakers Brush SkirtsVacuum Motor Changing Vacuum MotorActuator Scrub Deck UP- Down REMOVAL/REPLACEMENT Scrub Deck UP-DOWN Actuator AdjustmentActuator Scrub Deck IN-OUT REMOVAL/REPLACEMENT Scrub Deck IN-OUT Actuator AdjustmentFront Squeegee To Replace or Rotate Front Squeegee BladeTo Adjust Front Squeegee Deflection Correct Not Enough TOO Much Side View of Squeegee BladeRecommended Greasing Solution Machine TroubleshootingProblem Cause Problem Cause Solution

10052410, SCX364 specifications

The Windsor SCX364, model number 10052410, is a sophisticated commercial-grade carpet extractor designed to deliver exceptional cleaning performance and efficiency in various settings, including hotels, offices, and retail spaces. This powerful machine offers a range of features and technologies aimed at ensuring superior floor care while also promoting operator ease and comfort.

One of the standout features of the Windsor SCX364 is its advanced suction system, which utilizes a high-efficiency vacuum motor. This motor not only enhances the extractor's cleaning ability but also aids in quick drying times, minimizing downtime and disruption in busy environments. The SCX364 is equipped with a large-capacity recovery tank, allowing for extended cleaning sessions without the need for frequent emptying, making it ideal for large areas.

Another critical technology integrated into the SCX364 is its dual-brush agitation system. This system employs two rotating brushes that work in unison to effectively loosen and lift dirt, stains, and debris from carpets. This dual-action approach ensures thorough cleaning and is particularly effective on high-traffic areas that may be more severely soiled.

In terms of operator comfort, the Windsor SCX364 features an ergonomic design that includes an adjustable handle and easy-to-use controls. These features enable operators to maneuver the machine effortlessly, even in tight spaces. Additionally, the lightweight construction of the SCX364 promotes ease of transport, allowing for convenient relocation between different areas.

The SCX364 is also designed with versatility in mind. It can accommodate a variety of cleaning solutions, enabling users to tailor their cleaning approach to different carpet types and soil levels. Its adjustable solution flow control allows operators to regulate water and detergent usage, optimizing cleaning performance while conserving resources.

In summary, the Windsor SCX364, model 10052410, is a high-performance carpet extractor that combines innovative technologies and user-oriented design. With its efficient suction system, dual-brush agitation, and adaptable settings, it stands out as a reliable choice for maintaining clean and inviting carpets in professional environments. Whether for routine maintenance or deep cleaning, the SCX364 delivers exceptional results, ensuring that carpets remain in excellent condition.